summaryrefslogtreecommitdiff
path: root/drivers/usb/host/Kconfig
AgeCommit message (Collapse)Author
2026-01-21arm: Remove remainder of ARCH_ORION5XTom Rini
With commit 5663b137e682 ("arm: Remove edminiv2 board") the last ARCH_ORION5X platform was removed. Remove the rest of the architecture code which is now unused. Reviewed-by: Tony Dinh <mibodhi@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2026-01-09dm: core: Default to using DEVRES outside of xPLTom Rini
The devm alloc functions that we have may follow the Linux kernel model where allocations are (almost always) automatically free()'d. However, quite often we don't enable, in full U-Boot, the tracking and free()'ing functionality. This in turn leads to memory leaks because the driver author expects that since the functions have the same name as in the Linux Kernel they have the same behavior. In turn we then get functionally correct commits such as commit 00e1fed93c8c ("firmware: ti_sci: Fix memory leaks in devm_ti_sci_get_of_resource") that manually add these calls. Rather than manually tracking allocations and implementing free()s, rework things so that we follow expectations by enabling the DEVRES functionality (outside of xPL phases). This turns DEVRES from a prompted symbol to a symbol that must be select'd, and we now remove our non-managed alloc/free functions from outside of xPL builds. Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2025-11-27usb: USB_EHCI_PCI depends on PCIHeinrich Schuchardt
CONFIG_USB_EHCI_PCI cannot work without CONFIG_PCI. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
2025-11-04usb: ehci-mx6: Extend support to i.MX91, i.MX93, i.MX94, and i.MX95Alice Guo
Since the EHCI USB driver is shared across i.MX91, i.MX93, i.MX94, and i.MX95, the condition check is updated to use IMX9. Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Marek Vasut <marek.vasut@mailbox.org>
2025-09-26usb: host: Tighten USB host driver dependenciesTom Rini
A few of the USB host drivers cannot build without access to some platform specific header files. Express those requirements in Kconfig as well. Reviewed-by: Marek Vasut <marek.vasut@mailbox.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2025-05-25usb: ulpi: Clean up how we enable supportTom Rini
The way we enable ULPI support today isn't something that should work. The "optional" keyword in a choice statement is not a documented feature. To make this work in a supported way, make USB_ULPI something we ask about if USB_HOST is set. Next, we move the choice of what viewer to use to be after the framework portion and to depend on that. We then borrow a few words from the top-level README to make the help text here clearer. Finally we make the Qualcomm driver select ULPI as it's required and we make the tegra driver not duplicate a check that Kconfig now handles for us. Signed-off-by: Tom Rini <trini@konsulko.com>
2025-02-11usb: dwc3: Remove dwc3 glue driver support for STiPatrice Chotard
STi will migrate to dwc3-generic driver, dwc3-sti-glue driver can be removed. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Marek Vasut <marex@denx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20250130163547.512990-4-patrice.chotard@foss.st.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
2025-01-13usb: ehci-mx6: Add i.MX95 supportMarek Vasut
i.MX95 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6 driver. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2024-12-11usb: renesas: Fix R-Car spellingMarek Vasut
The correct spelling is R-Car, including the dash, update the usage. Kconfig strings and comment changes only, no functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2024-10-27drivers: usb: Add generic XHCIPatrick Rudolph
Add support for the generic XHCI driver that contains no SoC specific code. It can be used on platforms that simply work out of the box, like on emulated platforms. TEST: Booted on QEMU sbsa machine using the generic xhci driver. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Marek Vasut <marex@denx.de>
2024-03-02ARM: renesas: Rename ARCH_RMOBILE to ARCH_RENESASMarek Vasut
Rename ARCH_RMOBILE to ARCH_RENESAS because all the chips are made by Renesas, while only a subset of them is from the R-Mobile line. Use the following command to perform the rename: " $ git grep -l 'ARCH_RMOBILE' | xargs -I {} sed -i 's@ARCH_RMOBILE@ARCH_RENESAS@g' {} " Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
2024-02-19usb: ehci-mx6: Add i.MX93 supportMathieu Othacehe
i.MX93 uses the same USB IP as i.MX8MM. It can then reuse the ehci-mx6 driver. Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2024-01-19configs: rockchip: Use dwc3-generic driver on RK3328 and RK3399Jonas Karlman
Complete the transition away from xhci-dwc3 and dwc3-of-simple drivers and change to use the dwc3-generic driver on remaining RK3328 and RK3399 boards. MISC, USB_DWC3 and USB_DWC3_GENERIC is enabled on boards that used to enable USB_XHCI_DWC3. USB_XHCI_DWC3 is dropped from updated boards along with the default y of USB_XHCI_DWC3_OF_SIMPLE. There is no intended change in functionality with this changes, USB 3.0 is expected to continue same as before this change. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2023-12-01usb: USB_XHCI_PCI depends on PCIHeinrich Schuchardt
Compiling with CONFIG_USB_XHCI_PCI and CONFIG_PCI=n results in usb/host/xhci-pci.c:48:(.text.xhci_pci_probe+0x44): undefined reference to `dm_pci_write_config32 Add the missing Kconfig dependency. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Marek Vasut <marex@denx.de>
2023-10-30Kconfig: Remove all default n/no optionsMichal Simek
Similar change was done by commit b4c2c151b14b ("Kconfig: Remove all default n/no options") and again sync is required. default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # tegra Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Angelo Dureghello <angelo@kernel-space.org>
2023-05-17usb: Move SPL_USB_HOST Kconfig symbol to drivers/usb/Marek Vasut
To avoid piling up all the various Kconfig symbols in one place, i.e. common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ . This commit moves SPL_USB_HOST and updates help text of both USB_HOST and SPL_USB_HOST . Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
2022-11-07usb: ehci: ehci-marvell: Support for marvell,ac5-ehciChris Packham
Unlike the other 64-bit mvebu SoCs the AlleyCat5 uses the older ehci block from the 32-bit SoCs. Adapt the ehci-marvell.c driver to cope with the fact that the ac5 does not have the mbus infrastructure the 32-bit SoCs have and ensure USB_EHCI_IS_TDI is selected. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2022-11-03usb: ohci: Use a flexible array member for portstatusSamuel Holland
The struct is only used to overlay the MMIO region, so the behavior is the same. This obsoletes the Kconfig option for the number of ports. Signed-off-by: Samuel Holland <samuel@sholland.org>
2022-09-26usb: host: nuvoton: Add nuvoton NPCM7xx ehci/ohci driverJim Liu
Add nuvoton BMC NPCM750 ehci/ohci driver Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
2022-08-12Convert CONFIG_SYS_FSL_QMAN_V3 et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_FSL_NGPIXIS CONFIG_SYS_FSL_QMAN_V3 CONFIG_SYS_FSL_RAID_ENGINE CONFIG_SYS_FSL_RMU CONFIG_SYS_FSL_SINGLE_SOURCE_CLK CONFIG_SYS_FSL_SRIO_LIODN CONFIG_SYS_FSL_TBCLK_DIV CONFIG_SYS_FSL_USB1_PHY_ENABLE CONFIG_SYS_FSL_USB2_PHY_ENABLE CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-13usb: xhci-mtk: add support for MediaTek MT7621 SoCWeijie Gao
This patch makes xhci-mtk driver available for MediaTek MT7621 SoC Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2022-07-07Convert CONFIG_USB_OHCI_NEW et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_OHCI_SWAP_REG_ACCESS CONFIG_SYS_USB_OHCI_CPU_INIT CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS CONFIG_SYS_USB_OHCI_SLOT_NAME CONFIG_USB_ATMEL CONFIG_USB_ATMEL_CLK_SEL_PLLB CONFIG_USB_ATMEL_CLK_SEL_UPLL CONFIG_USB_OHCI_LPC32XX CONFIG_USB_OHCI_NEW Signed-off-by: Tom Rini <trini@konsulko.com>
2022-07-07Convert CONFIG_USB_XHCI_EXYNOS et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_XHCI_EXYNOS CONFIG_USB_EHCI_EXYNOS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_USB_MAX_CONTROLLER_COUNT to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_MAX_CONTROLLER_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_USB_EHCI_TXFIFO_THRESH to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_EHCI_TXFIFO_THRESH Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to KconfigTom Rini
This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-28Convert CONFIG_EHCI_DESC_BIG_ENDIAN et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_EHCI_DESC_BIG_ENDIAN CONFIG_EHCI_MMIO_BIG_ENDIAN Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-23usb: ehci-omap: Remove OMAP_EHCI_PHYx_RESET_GPIO from KconfigAdam Ford
With the omap-ehci driver now using the phy subsystem to enable and disable reset, the driver no longer needs to know which GPIO's are used, and they can be removed from Kconfig. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-02-23usb: ehci-omap: Make Kconfig select PHY if USB_EHCI_OMAPAdam Ford
The USB_EHCI_OMAP driver currently has a series of Kconfig options which let users specify a GPIO for the reset pin. Some devices may have only one reset, while others might have more. Since there is a nop phy driver, let's selct enable the PHY system, and imply the nop phy driver. The nop phy driver can now toggle the reset pins when putting the phy in and out of reset. If the gpio is listed under the phy, it will get toggled and the hard-coded config options specifying the GPIO numbers can eventually go away. Signed-off-by: Adam Ford <aford173@gmail.com>
2022-01-26usb: Modify Kconfig of the USB_EHCI_MXS to use this driver with imx28Lukasz Majewski
The ehci-mxs driver can be also used with imx28 SoC, not only imx23. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2021-10-15Convert CONFIG_USB_EHCI_IS_TDI to KconfigMarek Behún
On mvebu this is defined if and only if !ARM64. Otherwise it is defined for boards with ARCH_MX23, ARCH_TEGRA and ARCH_ZYNQ, and also for SOC_AR934X (tplink_wdr4300). Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-10-15Convert CONFIG_USB_EHCI_MXS to KconfigMarek Behún
This option is only used for mx23evk_defconfig mx23_olinuxino_defconfig which are the only i.MX23 boards. Add depend on ARCH_MX23 and default to y. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2021-09-27Convert CONFIG_OMAP_EHCI_PHY1_RESET_GPIO et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO To do this, we also introduce CONFIG_HAS_CONFIG_OMAP_EHCI_PHYn_RESET_GPIO options to get setting the GPIO number. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-27Convert CONFIG_USB_XHCI_OMAP to KconfigTom Rini
This converts the following to Kconfig: CONFIG_USB_XHCI_OMAP Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31Kconfig: Remove all default n/no optionsMichal Simek
default n/no doesn't need to be specified. It is default option anyway. Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Rework FSP_USE_UPD portion] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-18usb: Enforce DM_USB migration for USB_HOST devices.Tom Rini
As the deadline for migration to DM_USB, when using a USB host controller has now gone two years past the deadline, enforce migration. This is done by: - Ensuring that all host controller options (other than the very legacy old MUSB ones) now select USB_HOST. USB_HOST now enforces DM_USB and OF_CONTROL. - Remove other parts of Kconfig logic that had platforms pick DM_USB. - To keep Kconfig happy, have some select statements test for USB_HOST as well. - Re-order some Kconfig entries and menus so that we can cleanly pick host or gadget roles. For the various HCD options that have platform glue options, group them together and update dependencies in some cases. - As SPL_DM_USB is not required, on platforms that had not yet enabled it, disable it. Cc: Marek Vasut <marex@denx.de> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Samuel Holland <samuel@sholland.org> Cc: FUKAUMI Naoki <naobsd@gmail.com> Cc: Andre Przywara <andre.przywara@arm.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-09usb: ehci-mx6: add support for i.MXRTGiulio Benetti
Add support for usb1 and usb2 present on i.IMXRT. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
2021-04-18usb: ehci-mx6: Add iMX8M supportMarek Vasut
The iMX8M uses nop PHY, select PHY and NOP_PHY automatically. Otherwise, the DM capable driver is now perfectly compatible. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
2020-10-07usb: xhci: octeon: Add DWC3 glue layer for OcteonStefan Roese
This patch adds the glue layer for the MIPS Octeon SoCs. It's ported mainly from the Linux code. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Marek Vasut <marex@denx.de>
2020-09-23xilinx: kconfig: Change Kconfig dependencies for Xilinx driversMichal Simek
Zynq/ZynqMP/Versal IPs should be possible to called also from Microblaze in PL and vice versa. That's why change dependencies and do not limit enabling just for some platforms. This is follow up patch based on commit 664e16ce99a0 ("xilinx: kconfig: Change Kconfig dependencies for Xilinx drivers"). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-05-30driver: usb: drop legacy rockchip xhci driverFrank Wang
We have changed to use dwc3 generic driver for usb3.0 host, so the legacy Rockchip's xHCI driver is not needed, and drop it. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2020-05-15rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRATrevor Woerner
Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15rename symbol: CONFIG_KIRKWOOD -> CONFIG_ARCH_KIRKWOODTrevor Woerner
Have this symbol follow the pattern of all other such symbols. This patch also removes a TODO from the code. Reviewed-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-15rename symbol: CONFIG_ORION5X -> CONFIG_ARCH_ORION5XTrevor Woerner
Have this symbol follow the pattern of all other such symbols. This patch removes a TODO from the code. Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2020-05-02xhci: mediatek: Add support for MTK xHCI host controllerChunfeng Yun
This patch is used to support the on-chip xHCI controller on MediaTek SoCs, currently control/bulk/interrupt transfers are supported. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Weijie Gao <weijie.gao@mediatek.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-04-13drivers: usb: host: Add BRCM xHCI driverRayagonda Kokatanur
Base driver for Broadcom xHCI controllers Signed-off-by: Bharat Kumar Reddy Gooty <bharat.gooty@broadcom.com> Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
2019-10-24ehci-mx6: Update EHCI driver to support OTG0 on i.MX7ULPYe Li
The ULP has two USB controllers. These two controllers have similar NC registers layout as i.MX7D. But OTG0 uses UTMI PHY simliar as i.MX6, not the integrated PHY on i.MX7D. The OTG1 needs off-chip HSIC PHY or ULPI PHY to work. This patch only supports OTG0 with UTMI PHY. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-10-24usb: host: remove the xhci-zynqmp driverJean-Jacques Hiblot
This driver is not used anymore. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2019-08-22usb: r8a66597: Add Kconfig entryMarek Vasut
Add missing Kconfig entry for the R8A66597 driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Chris Brandt <chris.brandt@renesas.com>
2019-08-08usb, ohci, pci: add DM support for PCI-based OHCI USB controllerHeiko Schocher
add new DM based PCI driver ohci-pci for PCI-based OHCI USB support. Signed-off-by: Heiko Schocher <hs@denx.de>
generated by cgit v1.2.3 (git 2.0.4) at 2026-03-20 22:13:07 +0000