| Age | Commit message (Collapse) | Author |
|---|
|
This commit adds support to manage an external regulator to enable the main
power supply VDD.
Signed-off-by: Arturo Buzarra <arturo.buzarra@digi.com>
|
|
A write to the TX buffer is performed before entering the loop to "avoid
clock starvation". This sometimes results in subsequent writes in
davinci_spi_xfer_data() to occur while the TXFULL bit is asserted,
leading to write failures.
Remove the preload of the TX buffer.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
|
|
When SPL_FS_LOADER is set to y and FS_LOADER is not enabled, the SPL build
fails with the following errors:
AR spl/boot/built-in.o
LD spl/u-boot-spl
arm-none-linux-gnueabihf-ld.bfd: drivers/misc/fs_loader.o: in function
`fw_get_filesystem_firmware':
/u-boot/drivers/misc/fs_loader.c:162: undefined reference to
`fs_set_blk_dev'
arm-none-linux-gnueabihf-ld.bfd: /home/frh/tdx/src/u-boot/drivers/misc/
fs_loader.c:185: undefined reference to `fs_read'
arm-none-linux-gnueabihf-ld.bfd: drivers/misc/fs_loader.o: in function
`select_fs_dev':
/u-boot/drivers/misc/fs_loader.c:89: undefined reference to
`fs_set_blk_dev_with_part'
make[1]: *** [scripts/Makefile.spl:527: spl/u-boot-spl] Error 1
make: *** [Makefile:2055: spl/u-boot-spl] Error 2
Fix it by replacing the FS_LOADER with SPL_FS_LOADER in the Makefile, so
the fs.c with the necessary function definitions are compiled.
Fixes: b071a07743d4 ("drivers: misc: Makefile: Enable fs_loader compilation at SPL Level")
Suggested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
|
|
Both regulators_enable_boot_on/off() are unused and superseded by
regulator uclass regulator_post_probe(). Remove both functions.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
This function is never called, drop it.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
regulator_post_probe
Turn regulators_enable_boot_on() and regulators_enable_boot_off() into
empty functions. Implement matching functionality in regulator_post_probe()
instead. The regulator_post_probe() is called for all regulators after they
probe, and regulators that have regulator-always-on or regulator-boot-on DT
properties now always probe due to DM_FLAG_PROBE_AFTER_BIND being set on
such regulators in regulator_post_bind().
Finally, fold regulator_unset() functionality into regulator_autoset().
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
In case a regulator DT node contains regulator-always-on or regulator-boot-on
property, make sure the regulator gets correctly configured by U-Boot on start
up. Unconditionally probe such regulator drivers. This is a preparatory patch
for introduction of .regulator_post_probe() which would trigger the regulator
configuration.
Parsing of regulator-always-on and regulator-boot-on DT property has been
moved to regulator_post_bind() as the information is required early, the
rest of the DT parsing has been kept in regulator_pre_probe() to avoid
slowing down the boot process.
Signed-off-by: Marek Vasut <marex@denx.de>
|
|
Prepare v2024.10-rc6
|
|
https://source.denx.de/u-boot/custodians/u-boot-dfu
u-boot-dfu-20240930
- Fix Kconfig dependencies for DFU_OVER_USB
|
|
Transfer initiation and completion for the non-zero Endpoints are
handled by cdns3_ep_run_transfer() and cdns3_transfer_completed()
respectively.
Failing to flush the cache associated with the TRB Pool within
cdns3_ep_run_transfer() results in the transfers never being initiated.
Similarly, failing to invalidate the cache associated with the TRB pool
within cdns3_transfer_completed() results in the transfers never being
completed.
Fix this.
Fixes: 7e91f6ccdc84 ("usb: Add Cadence USB3 host and gadget driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Marek Vasut <marex@denx.de>
|
|
The buck variable is zero based, i.e. buck=0 match BUCK1 in datasheet.
Remove any buck + 1 calculation to be more consistent in usage of the
buck variable across the different RK8xx variants in the driver.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
|
|
Wrong POWER_EN reg is used to get and set enabled state for the RK806
buck 4 and 8 regulators, also wrong POWER_SLP_EN0 bit is used for
suspend state for the RK806 buck 1-8 regulators.
Fix this by not adding one to the zero based buck variable.
Fixes: f172575d92cd ("power: rk8xx: add support for RK806")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
|
|
dev_get_driver_ops() may return NULL when the udevice is invalid.
Move the ops check to top of functions to consistently return -ENOSYS
when ops is unimplemented and prevent trying to access uclass plat data,
also add missing NULL checks to suspend ops.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
|
|
On some boards a PMIC regulator is flagged with regulator-on-in-suspend
and does not define any suspend or max microvolt, e.g. on Radxa ROCK 3A:
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-state-mem {
regulator-on-in-suspend;
};
};
This result in suspend_uV having the value -ENODATA after probe.
This negative voltage, -ENODATA, gets missinterpreted and result in an
unexpected voltage being set by autoset.
E.g. on Radxa ROCK 3A the vcc_ddr regulator by default have a normal and
suspend voltage value of 0.5v. However, due to this missinterpretation
the suspend voltage end up beind set to 0.5625v instead.
Fix this by skip calling regulator_set_suspend_value() in autoset and
also protect calling set value ops when input value is -ENODATA.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22406
- i.MX93 FEC fixes.
- Always name the generated fitImage u-boot.itb to keep compatibility
with pr-buildman behavior.
-----------------------
|
|
After FEC is halted by calling fec_halt callback, we should not continue
receiving packet. Otherwise it will process previous pending interrupts
on EIR register and uses wrong rbd index as this has been reset to 0.
The GRA interrupt which is triggered by issuing graceful stop command to
FEC transmitter in fec_halt is processed in this case. It causes wrong
receive buffer descriptors be used by FEC in next time.
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
i.MX93 FEC ENET port supports two mode: RGMII and RMII. For RGMII,
there is an internal /2 divider, so the freq needs to set with (*2),
otherwise the speed will not reach 1G and cause communication error
in some network environments. For RMII, the clk path is
ccm -> enet tx_clk pin -> pad loop back to enet, no /2 divider.
So fix for RGMII mode with freq multiplied by 2.
Fixes: 09de565f76b ("net: fec_mxc: support i.MX93")
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Jerome Forissier <jerome.forissier@linaro.org> says:
Miscellaneous fixes made when developing the lwIP series [1]. They are
posted separately since they make sense on their own. Subsequent
versions of the lwIP series will contain a squashed version of this one.
[1] http://patchwork.ozlabs.org/project/uboot/list/?series=420712&state=%2A&archive=both
|
|
The fec_mxc_init() function currently always returns 0. This does not
allow the callers to detect when for instance the PHY initialization
failed due to the port being unconnected. Fix that by returning the
status of fec_open().
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
FTGMAC100 enables drivers/net/ftgmac100.c which uses
PHY_INTERFACE_MODE_NCSI, which is defined only when PHY_NCSI is enabled.
Therefore FTGMAC100 depends on PHY_NCSI. However adding such a
dependency causes a "recursive dependency detected!" message, so
add a dependency on NET instead (PHY_NCSI depends on NET).
All in all, either the stack is NET and FTGMAC100 can be enabled,
or it is NET_LWIP (or NO_NET) and it cannot.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
PHY_NCSI enables drivers/net/phy/ncsi.c which calls net_loop() and
net_set_timeout_handler(). That's the legacy NET stack (as opposed to
NET_LWIP). Therefore add the dependency to Kconfig.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
dtsec_init_phy() is defined only with MII so add the proper conditional
in the caller code.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Prefix the flash status codes (ERR_*) with FL_ in order to avoid clashes
with third-party libraries. Case in point: including the lwIP library
header file <lwip/err.h> which defines err_enum_t as an enum with values
being ERR_*.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
|
|
Make SPL_RAM_SUPPORT a hidden Kconfig symbol, automatically selected
by SPL_RAM_DEVICE or SPL_DFU. Avoids the situation where SPL_RAM_SUPPORT
may be enabled without the other two being enabled, which results in the
following build warning:
common/spl/spl_ram.c:19:14: warning: ‘spl_ram_load_read’ defined but not used [-Wunused-function]
19 | static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
In lpddr4_start function error returned by lpddr4_enablepiinitiator
may go undetected due to overwrite of return code.
Add support to handle error in above case.
Reported-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-microblaze into next
AMD/Xilinx changes for v2025.01-rc1
kbuild:
- Add rules for automatically applying DT overlays
Microblaze:
- Enable bootscript location via DT
AMD/Xilinx
- Enable SIMPLE_PM_BUS by default
ZynqMP:
- DT updates and alignments with dt-schema
- Call fdtoverlay via make directly
- Enable non-invasive CCI-400 PMU debug
- Disable secure access for boot devices
- Add new zynqmp reboot command
Versal NET:
- Cleanup spi_get_env_dev()
Kria:
- Add bootmenu support
sdhci:
- Do not call device_is_compatible everywhere
net:
- Remove is-internal-pcspma DT flag
|
|
In case the cyclic framework is enabled, poll the card detect of already
initialized cards and deinitialize them in case they are removed. Since
the card initialization is a longer process and card initialization is
done on first access to an uninitialized card anyway, avoid initializing
newly detected uninitialized cards in the cyclic callback.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
use dev_dbg() instead of dev_info() for debug related
prints.
Get's rid of below print from console.
"cdns,sierra serdes@5030000: sierra probed"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
|
|
With "reg-mux" compatible the driver no longer expects the parent
device to be a syscon type. It uses it's own regmux.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
|
|
Generic understanding/consideration is that phy-mode as sgmi means that the
internal PCS(Physical Coding Sublayer) should be enabled by default.
Xilinx GEM implementation allows configuration GEM (gmii mode) + PL PCS PMA
(sgmii mode, Physical Medum Attachment) but in this case phy-mode should be
setup as gmii.
The reason for this assumption is that phy-mode should be described based
on GEM configuration not based on mode coming out of PHY.
Also Linux kernel automatically setting up PCSSEL bit when phy mode is
sgmii without a need to specified additional DT propety.
All our DTSes with sgmii phy mode have this flag enabled that's why there
is no need/reason to just duplicate information.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2ecdbcc4ce692e2f8b3e7054a2abab35f6c03a69.1726213052.git.michal.simek@amd.com
|
|
There are lot of device_is_compatible() present in the driver.
Remove them and replace with a variables "SDHCI_COMPATIBLE_SDHCI_89A"
and "SDHCI_COMPATIBLE_VERSAL_NET_EMMC" with match data.
This change saves the space and reduce the execution time.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20240913093157.2343476-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
This patch fixes timeout issues seen on large NOR flash.
For full-chip erase, where we use the SPINOR_OP_CHIP_ERASE (0xc7)
opcode. Use a different timeout for full-chip erase than for other
commands.
[Ported from Linux kernel commit
09b6a377687b ("mtd: spi-nor: scale up timeout for
full-chip erase") ]
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
|
|
Add support for iMX93 low performance parts 9302 and 9301 which
restrict to low drive voltage only.
The parts run A55 max speed at 900Mhz and M33 at 133Mhz, have NPU
and A55 core1 (9301) disabled.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
To support 1.866GTS LPDDR4x timing script, need to add 233Mhz freq
to DDR PLL for second mission point at 933MTS. Otherwise DDR training
will fail.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
Simon Glass <sjg@chromium.org> says:
This series includes the patches needed to make make the EFI 'boot' test
work. That test has now been split off into a separate series along with
the EFI patches.
This series fixes these problems:
- sandbox memory-mapping conflict with PCI
- the fix for that causes the mbr test to crash as it sets up pointers
instead of addresses for its 'mmc' commands
- the mmc and read commands which cast addresses to pointers
- a tricky bug to do with USB keyboard and stdio
- a few other minor things
|
|
The driver model deadline for USB was in 2019, so drop the old USB
keyboard code, to avoid needing to deal with the extra code path.
Drop the unnecessary #ifdef around USB_KBD_BOOT_REPORT_SIZE while we
are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Devices should be probed when they are used, not before. Drop this
boot-time probing.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
We should not need to announce this device. Drop the message.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Jim Liu <jim.t90615@gmail.com> says:
Modify npcm8xx new boot design.
Correct memory setting and set gpio default value.
|
|
Clear all gpio events to avoid unexpected interrupts
during kernel booting.
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
|
|
Aspeed AST27xx SoCs integrate the CPTRA 1.0 secure IP, which
export a SHA accelerator interface for SoC to use.
Note that CPTRA 1.0 supports only SHA384 and SHA512 and this
patch is verified by the 'hash test sha384/sha512' commands.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
|
|
Prepare v2024.10-rc5
|
|
Fix link errors caused by missing Kconfig dependencies:
1. DFU_OVER_USB compiles common/dfu.c which calls g_dnl_clear_detach()
which is implemented in drivers/usb/gadget/g_dnl.c which needs
USB_GADGET_DOWNLOAD. Test case:
$ printf "CONFIG_USB_GADGET_DOWNLOAD=n\nCONFIG_USB_FUNCTION_FASTBOOT=n" \
>>configs/am62px_evm_a53_defconfig
$ make am62px_evm_a53_defconfig
$ make CROSS_COMPILE=aarch64-linux-gnu-
[...]
common/dfu.c:34:(.text.run_usb_dnl_gadget+0x68): undefined reference to `g_dnl_clear_detach
[...]
2. With the above fixed, the same build causes:
common/spl/spl_dfu.c:29:(.text.spl_dfu_cmd+0xb0): undefined reference to `run_usb_dnl_gadget'
This is because SPL_DFU compiles common/spl/spl_dfu.c which calls
run_usb_dnl_gadget() which is implemented in common/dfu.c which needs
DFU_OVER_USB.
Therefore add these dependencies to Kconfig.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20240910102751.3182982-1-jerome.forissier@linaro.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
|
|
https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-20241024
UEFI:
* Use generated UUIDs in UEFI capsules:
- efi: define struct efi_guid
- lib: uuid: add UUID v5 support
- efi: add a helper to generate dynamic UUIDs
- doc: uefi: document dynamic UUID generation
- sandbox: switch to dynamic UUIDs
- lib: uuid: supporting building as part of host tools
- include: export uuid.h
- tools: mkeficapsule: use u-boot UUID library
- tools: mkeficapsule: support generating dynamic GUIDs
- test: lib/uuid: add unit tests for dynamic UUIDs
- test: lib/uuid: add tests for UUID version/variant bits
* Minor code clean-up
- shorten efi_bootmgr_release_uridp_resource()
- rename efi_bootmgr_image_return_notify
- return the correct error in efi_bootmgr_release_uridp()
- Kconfig: clean up the efi configuration status
- Use puts() in cout so that console recording works
- Put back copyright message in helloworld.c
|
|
The current documentation for the bootcount API is on our website and
not the old wiki, update the link in two places.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Move this header to include/u-boot/ so that it can be used by external
tools.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
|
|
into next
CI result shows no issue:
https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/22315
----------------------------------------------------------------
- Aspeed: Add AST2700 board (Ibex RISC-V core) support
- Add timer, dram controller, network support
- Sophgo: Add clock controller support for Milk-V Duo
|
|
Changing the duty-cycle should not blindly override (and clear) the
enable (EN) bit if it has already been set. For instance, a PWM
backlight can be enabled and set to a specific intensity using two
operations. The order of these operations should not matter.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
|
Add driver for AST2700 to initialize DRAM in SPL.
This patch also refactors the Kconfig dependency of
Aspeed DRAM drivers as some of them are shared among
the file structures of RV and ARM ISAs.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Acked-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Add the driver for the AST2700 Ibex timer, which uses CPU
cycles as the timer count running at 200MHz.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
