summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2023-02-07gpio: Drop unused pca9698 driverSimon Glass
This is not used. Drop the driver and Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07omap: Drop unused CONFIG_OMAP_USB_PHYSimon Glass
This option does not exist, so the Makefile rule does nothing. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-02-07mtd: Drop unused nand_plat driverSimon Glass
This is not used since this commit: 936478e797a SPARC: Remove Drop the driver and Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07mtd: Drop unused fsmc_nand driverSimon Glass
This is not used since this commit: 570c3dcfc15 arm: Remove spear600 boards and the rest of SPEAr support Drop the driver and Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2023-02-07mtd: Drop unused fsl_upm driverSimon Glass
This is not used since this commit: 8d1e3cb1400 powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support Drop the driver and Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-By: Michael Trimarchi <michael@amarulasolutions.com>
2023-02-07gpio: Drop unused mpc83xx_gpio driverSimon Glass
This is not used since this commit: 7458f18e5c2 ppc: Remove MPC8313ERDB boards Drop the driver and Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07video: Drop unused lg4573 driverSimon Glass
This is not used since this commit: 3cf02f5ffa4 imx6: remove not longer supported aristainetos boards Drop the driver and Kconfig option. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07arm: Drop old kona codeSimon Glass
The KONA and KONA_GPIO options don't exist anymore, since this commit: 0f6807e77b0 arm: Remove bcm28155_ap board Drop the dead code. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07freescale: Drop unused ftpmu010 driverSimon Glass
Drop this unused code. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07misc: Drop mc9sdz60 driverSimon Glass
Drop this unused driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07fpga: Add a FPGA_STRATIX_II optionSimon Glass
There is no Kconfig option for this code, but it seems to be useful. Add one. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07fpga: Add a LATTICE optionSimon Glass
There is no Kconfig option for this code, but it seems to be useful. Add one. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07samsung: Drop CONFIG_EXYNOS_PWM_BLSimon Glass
This is not defined anywhere. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
2023-02-07Drop CONFIG_DM644X_GPIOSimon Glass
Drop this unused option. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07misc: Drop ali512xSimon Glass
Drop this unused driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07gpio: Drop adi_gpio2Simon Glass
Drop this unused driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07power: Drop pmic_max77693.cSimon Glass
Drop this driver and the associated CONFIG option, as it is not used. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-07nand: Drop CONFIG_NAND_SPEARSimon Glass
This is not used anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
2023-02-07power: Drop fg_max77693Simon Glass
This is not used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-06qemu: Add a bootdev for qfwSimon Glass
Add a bootdev device for qfw so that it can be used with standard boot. This simply checks for the correct method and then does the read. Most of the other logic is handed in a new bootmeth driver. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-06bootstd: Correct virtio block-device handlingSimon Glass
At present virtio tries to attach QEMU services to a bootdev device, which cannot work. Add a check for this. Also use bootdev_setup_sibling_blk() to create the bootdev device, since it allows the correct name to be used and bootdev_get_sibling_blk() to work as expected. The bootdev is not created on sandbox since it does have a real virtio device and it is not possible to read blocks. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: a60f7a3e35b ("bootstd: Add a virtio bootdev") Reported-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-02-06virtio: Add some debuggingSimon Glass
When QEMU does not respond for some reason, it is helpful to have debugging info to show. Add some. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-04drivers: video: tidss: TIDSS video driver support for AM62xNikhil M Jain
Added tidss video driver support which enables display on oldi panel using AM62x, it creates a simple pipeline framebuffer==>vidl1==>ovr1==>vp1==>oldi_panel and calculates clock rates for panel from panel node in device tree. To compile TIDSS when user sets CONFIG_VIDEO_TIDSS add rule in Makefile. Include tidss folder location in Kconfig. TIDSS is ported from linux kernel version 5.10.145 Signed-off-by: Nikhil M Jain <n-jain1@ti.com>
2023-02-04drivers: video: simple_panel: make simple panel independent of backlightNikhil M Jain
This patch updates the necessary Kconfigs to make simple panel driver independent of backlight driver and compiling backlight related code in simple-panel driver conditionally to when user has set CONFIG_BACKLIGHT. Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-04drivers: core: ofnode: Add panel timing decode.Nikhil M Jain
ofnode_decode_display_timing supports reading timing parameters from subnode of display-timings node, for displays supporting multiple resolution, in case if a display supports single resolution, it fails reading directly from display-timings node, to support it ofnode_decode_panel_timing is added. Signed-off-by: Nikhil M Jain <n-jain1@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-04video: ti: am335x: restore driver-model codeDario Binacchi
The commit 82f7b869f5d7a ("video: Drop CONFIG_AM335X_LCD") removed not only the LCD legacy implementation but also the code with driver model support. The patch restores the code with driver model support. Fixes: 82f7b869f5d7a ("video: Drop CONFIG_AM335X_LCD") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2023-02-02drivers: net: fsl_ls_mdio: prevent a NULL pointer dereferenceIoana Ciornei
Prevent a NULL pointer dereference in the probe path by checking the return valud of dev_read_addr_ptr() against NULL. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02drivers: net: fsl-mc: do not use multiple blank linesIoana Ciornei
Remove the instances in which we have multiple blank lines. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02drivers: net: fsl-mc: align parameters to the open paranthesisIoana Ciornei
There were some cases in which the function parameters were not aligned to the open paranthesis. Fix those instances. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02drivers: net: fsl-mc: remove explicit castIoana Ciornei
Remove all the explicit casts from the void* returned by calloc. With this we also improve a bit the length of those lines and there is no need to split the assignment. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02drivers: net: fsl-mc: do not prefix decimal values with 0xIoana Ciornei
The fsl-mc driver printed debug information which used the 0x prefix for decimal values. This only confuses anyone looking through the log. Because of this, just remove the prefix and use the "DPXY.<id>" notation which is the standard one for the DPAA2 objects. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02drivers: net: fsl-mc: remove an useless break statementIoana Ciornei
The break statement is just after a goto statement, thus it will not get executed. Just remove it. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02drivers: net: fsl-mc: remove useless assignment of variableIoana Ciornei
The cur_ptr variable is set to the start of the log buffer but then it's not used. Just remove the assignment altogether. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-02-02net: add MV88E6xxx DSA driverTim Harvey
Add a DSA driver for the MV88E6xxx compatible Ethernet switches. Cc: Marek Behún <marek.behun@nic.cz> Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-02-02net: fec: add support for DM_MDIOTim Harvey
Add support for DM_MDIO by registering a UCLASS_MDIO driver and attempting to use it. This is necessary if wanting to use a DSA driver for example hanging off of the FEC MAC. Care is taken to fallback to non DM_MDIO mii bus as several boards define DM_MDIO without having the proper device-tree configuration necessary such as an mdio subnode, a phy-mode prop, and either a valid phy-handle prop or fixed-phy subnode which will cause dm_eth_phy_connect() to fail. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-02-02net: ksz9477: remove unnecessary xmit and recv functionsTim Harvey
Remove the unnecessary xmit and recv functions. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-02-02Merge commit 'refs/pipelines/15015' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-tegra
2023-02-02drivers: timer: add driver for ARMv7 based Tegra devices and T210Svyatoslav Ryhel
Add timer support for T20/T30/T114/T124 and T210 based devices. Driver is based on DM, has device tree support and can be used on SPL and early boot stage. Arm64 Tegra (apart T210) according to comment in tegra-common.h use architected timer. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF600T T30 Tested-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> # Surface RT T30 Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Agneli <poczt@protonmail.ch> # Toshiba AC100 T20 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Co-developed-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom <twarren@nvidia.com>
2023-02-02ARM: tegra: remap clock_osc_freq for all Tegra familySvyatoslav Ryhel
Enum clock_osc_freq was designed to use only with T20. This patch remaps it to use additional frequencies, added in T30+ SoC while maintaining backwards compatibility with T20. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # ASUS TF600T T30 Tested-by: Jonas Schwöbel <jonasschwoebel@yahoo.de> # Surface RT T30 Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101 T20 Tested-by: Agneli <poczt@protonmail.ch> # Toshiba AC100 T20 Tested-by: Thierry Reding <treding@nvidia.com> # T30, T124, T210 Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # LG P895 T30 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom <twarren@nvidia.com>
2023-02-02net: ravb: Drop SoC-specific compatible supportMarek Vasut
The current set of U-Boot upstream R-Car Gen3 DTs all contain generic "renesas,etheravb-rcar-gen3" compatible strings, drop the SoC specific compatible string support from U-Boot to reduce size and duplication. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02clk: renesas: rcar-gen3: Factor out CPG libraryHai Pham
R-Car V3U has a CPG different enough to not be a generic Gen3 CPG but similar enough to reuse code. Introduce a new CPG library, factor out the SD clock and RPC clock handling and hook them to the generic Gen3 CPG driver so we have an equal state. Based on Linux commit [1] and [2] by Wolfram Sang [1] 8bb67d87346a ("clk: renesas: rcar-gen3: Factor out CPG library") [2] 6f21d145b90f ("clk: renesas: cpg-lib: Move RPC clock registration to the library") Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Marek: - Add rcar_clk_* prefix to all functions - Rebase on changes to clk: renesas: Introduce and use rcar_clk_get_rate64_div_table function - Use u32_encode_bits/GENMASK bitfield ops
2023-02-02clk: renesas: Add R8A77970 SD0H/SD0 clocks for SDHIHai Pham
On R-Car V3M (AKA R8A77970), the SD0CKCR is laid out differently than on the other R-Car gen3 SoCs. Hence, new clock types are introduced respectively. Based on Linux commit 381081ffc294 ("clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHI") by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Marek: - Fix missing ~ in GENMASK(a, b), use clrsetbits_le32 instead - Do not modify r8a77970-cpg-mssr.c much, drop enum r8a77970_clk_types which is now part of common clock types in rcar-gen3-cpg.h instead
2023-02-02clk: renesas: Switch to new SD clock handlingHai Pham
The old SD handling code was huge and could not handle all the details which showed up on R-Car Gen3 SoCs meanwhile. It is time to switch to another design. Have SDnH a separate clock, use the existing divider clocks and move the errata handling from the clock driver to the SDHI driver where it belongs. Based on Linux series by Wolfram Sang, commit bb6d3fa98a41 ("clk: renesas: rcar-gen3: Switch to new SD clock handling") and commit e5f7e81ee430a ("mmc: renesas_sdhi: Parse DT for SDnH") Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Marek: - Add rcar_clk_* prefix to all functions - Fix missing ~ in GENMASK(a, b), use clrsetbits_le32 instead - Use DIV_ROUND_CLOSEST, else if parent clock = 199999992 and rate = 200000000, the divider would be 0 and table lookup would fail. - Turn rcar_clk_get_table_val into signed integer, so it can return 0 as a valid value and negative values as errors. - Make the code operate on correct clock and add comment which explains the reasoning behind it. - Rebase on changes to clk: renesas: Introduce and use rcar_clk_get_rate64_div_table function
2023-02-02clk: renesas: Handle E3/D3 RPCSRC clockHai Pham
The RPCSRC clock divider on R-Car D3 is very similar to the one on R-Car E3, but uses a different pre-divider for the PLL0 parent. Add a new macro to describe it, reusing the existing clock type for R-Car E3. As both E3/D3 RPCSRC clock divider are different from the rest of R-Car Gen3, keep the original implementation from Linux. Based on Linux commit 40745482eec8 ("clk: renesas: r8a774c0: Add RPC clocks") by Lad Prabhakar and 9d18f81b3535 ("clk: renesas: r8a77995: Add RPC clocks") by Geert Uytterhoeven. Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Add D3 tweaks
2023-02-02clk: renesas: Introduce and use rcar_clk_get_rate64_div_table functionHai Pham
Introduce new helper function to handle clock type that uses clk_div_table struct. Based vaguely on Linux code. Make use of clk_div_table in RPC clocks handling. The E3/D3 RPCSRC need to be handled differently and will be addressed in subsequence patch. Based on Linux commit db4a0073cc82 ("clk: renesas: rcar-gen3: Add RPC clocks") by Sergei Shtylyov. Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Marek: - Squash patches to avoid adding unused code: clk: renesas: Make use of clk_div_table in RPC clocks handling clk: renesas: Introduce rcar_clk_get_rate64_div_table function - Move the new code to the beginning of clk-rcar-gen3 to avoid tables mixed with code - Use rcar_ prefix for get_table_div function - Get rid of custom macros, use GENMASK. Use custom field_get implementation as the generic FIELD_GET does not support constant mask and u32_get_bits requires higher optimization level - Pass in the register bit mask instead of width/shift combination - Turn rcar_clk_get_rate64_div_table into s64, as it can return -EINVAL
2023-02-02clk: renesas: Convert Gen2/Gen3 clock tables to clk-provider struct ↵Marek Vasut
clk_div_table Replace custom local structure with matching one from clk-provider.h . No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-02-02mmc: renesas-sdhi: Flag non-standard SDnH handling for V3MHai Pham
V3M handles SDnH differently than other Gen3 SoCs, so let's add a separate entry for that. This will allow better SDnH handling in the future. Based on Linux commit 627151b4966f ("mmc: renesas_sdhi: Flag non-standard SDnH handling for V3M") by Wolfram Sang Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-02-02mmc: renesas-sdhi: Drop R-Car H3 ES3.0 HS400 calibration tableHai Pham
It is unnecessary, so clean it up. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # update commit message, mention ES3.0 Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-02-02mmc: renesas-sdhi: Add R8A77961 M3-W+ supportHai Pham
Support R8A77961 M3-W+ SoC. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2023-02-02mmc: renesas-sdhi: Adjust HS400 calibration offsets for M3-W r1.3Hai Pham
Still uses 0x3 for now, adjust the offset value to TMPPORT3 accordingly Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-06 17:05:04 +0000