| Age | Commit message (Collapse) | Author |
|---|
|
Ensure children of cmu_top have alphanumeric ordering. Top is special as it
feeds all the other children CMUs. This ordering then matches the
clk-gs101.c file.
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260113-dpu-clocks-v3-1-cb85424f2c72@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
pic64gx has a clock controller compatible with mpfs-clkcfg. Don't permit
the deprecated configuration that was never supported for this SoC.
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260113-glue-justifier-566ffab2ffd3@spud
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
pic64gx SoC Clock Conditioning Circuitry is compatibles
with the Polarfire SoC
Signed-off-by: Pierre-Henry Moussay <pierre-henry.moussay@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260113-guise-conceded-88030697b831@spud
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Add compatible strings for clock drivers to support Spacemit K3 SoC,
also includes all the defined clock IDs.
The SpacemiT K3 SoC clock IP is scattered over several different blocks,
which are APBC, APBS, APMU, DCIU, MPMU, all of them are capable of
generating clock and reset signals. APMU and MPMU have additional Power
Domain management functionality.
Following is a brief list that shows devices managed in each block:
APBC: UART, GPIO, PWM, SPI, TIMER, I2S, IR, DR, TSEN, IPC, CAN
APBS: various PPL clocks control
APMU: CCI, CPU, CSI, ISP, LCD, USB, QSPI, DMA, VPU, GPU, DSI, PCIe, EMAC..
DCID: SRAM, DMA, TCM
MPMU: various PLL1 derived clocks, UART, WATCHDOG, I2S
Link: https://lore.kernel.org/r/20260108-k3-clk-v5-1-42a11b74ad58@gentoo.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
into clk-for-6.20
Merge the Kaanapali camera, display, GPU, and video clock controller
bindings through a topic branch, to allow making them available to the
DeviceTree branch as well.
|
|
Qualcomm GX(graphics) is a clock controller which has PLLs, clocks and
Power domains (GDSC), but the requirement from the SW driver is to use
the GDSC power domain from the clock controller to recover the GPU
firmware in case of any failure/hangs. The rest of the resources of the
clock controller are being used by the firmware of GPU. This module
exposes the GDSC power domains which helps the recovery of Graphics
subsystem.
Add bindings documentation for the Kaanapali Graphics Clock and Graphics
power domain Controller for Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-7-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for the video clock controller on Qualcomm
Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-6-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the compatible and the bindings for CAMCC support on Kaanapali
SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-5-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document device tree bindings for display clock controller for
Qualcomm Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-4-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
clk-for-6.20
Merge the SM8750 camera clock controller binding through a topic branch,
in order to allow the defines to made availabe to the DeviceTree
branch as well.
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SM8750 platform. The camera clock controller is split between
camcc and cambist. The cambist controls the mclks of the camera clock
controller.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251202-sm8750_camcc-v1-2-b3f7ef6723f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add devicetree bindings for the global clock controller on Qualcomm
SDM439 platform.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20251117-gcc-msm8940-sdm439-v2-3-4af57c8bc7eb@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add devicetree bindings for the global clock controller on Qualcomm
MSM8940 platform.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20251117-gcc-msm8940-sdm439-v2-1-4af57c8bc7eb@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add some of the UFS symbol rx/tx muxes were not initially described.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260103-ufs_symbol_clk-v2-1-51828cc76236@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Each CMU (with the exception of cmu_top) has a corresponding sysreg bank
that contains the BUSCOMPONENT_DRCG_EN and optional MEMCLK registers.
The BUSCOMPONENT_DRCG_EN register enables dynamic root clock gating of
bus components and MEMCLK gates the sram clock.
Now the clock driver supports automatic clock mode, to fully enable dynamic
root clock gating it is required to configure these registers. Update the
bindings documentation so that all CMUs (with the exception of
gs101-cmu-top) have samsung,sysreg as a required property.
Note this is NOT an ABI break, as if the property isn't specified the
clock driver will fallback to the current behaviour of not initializing
the registers. The system still boots, but bus components won't benefit
from dynamic root clock gating and dynamic power will be higher (which has
been the case until now anyway).
Additionally update the DT example to included the correct CMU size as
registers in that region are used for automatic clock mode.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://patch.msgid.link/20251222-automatic-clocks-v7-1-fec86fa89874@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add device tree clock binding definitions for CMU_MFD
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251119114744.1914416-2-raghav.s@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
My name is stamped into maintainership for a big slew of DT
bindings. Now that it is changing, switch it over to my
kernel.org mail address, which will hopefully be stable for the
rest of my life.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251216-maintainers-dt-v1-1-0b5ab102c9bb@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The gate bindings have an artificial split between a "syscon" and clock
provider node. Allow "reg" properties so this split can be removed.
Reviewed-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://patch.msgid.link/20251029155615.1167903-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add DT bindings for the peripheral clock controller of the Amlogic T7
SoC family.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251212022619.3072132-4-jian.hu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add DT bindings for the PLL clock controller of the Amlogic T7 SoC family.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251212022619.3072132-2-jian.hu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"The technical details below. For me the CIX Semi and Axis
Communications ARTPEC-9 SoCs were the most interesting new drivers in
this merge window.
Core changes:
- Handle per-direction skew control in the generic pin config
- Drop the pointless subsystem boilerplate banner message during
boot. Less noise in the console. It's available as debug message if
someone really want it
New drivers:
- Samsung Exynos 8890 SoC support
- Samsung Exynos derived Axis Communications ARTPEC-9 SoC support.
These guys literally live next door to me, ARTPEC spells out "Axis
Real-Time Picture Encoding Chip" and is tailored for camera image
streams and is something they have evolved for a quarter of a
century
- Mediatek MT6878 SoC support
- Qualcomm Glymur PMIC support (mostly just compatible strings)
- Qualcomm Kaanapali SoC TLMM support
- Microchip pic64gx "gpio2" SoC support
- Microchip Polarfire "iomux0" SoC support
- CIX Semiconductors SKY1 SoC support
- Rockchip RK3506 SoC support
- Airhoa AN7583 chip support
Improvements:
- Improvements for ST Microelectronics STM32 handling of skew
settings so input and output can have different skew settings
- A whole bunch of device tree binding cleanups: Marvell Armada and
Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2
(NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to
schema"
* tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
pinctrl: add CONFIG_OF dependencies for microchip drivers
pinctrl: starfive: use dynamic GPIO base allocation
pinctrl: single: Fix incorrect type for error return variable
MAINTAINERS: Change Linus Walleij mail address
pinctrl: cix: Fix obscure dependency
dt-bindings: pinctrl: cix,sky1-pinctrl: Drop duplicate newline
dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group
pinctrl: airoha: Fix AIROHA_PINCTRL_CONFS_DRIVE_E2 in an7583_pinctrl_match_data
pinctrl: airoha: fix pinctrl function mismatch issue
pinctrl: cherryview: Convert to use intel_gpio_add_pin_ranges()
pinctrl: intel: Export intel_gpio_add_pin_ranges()
pinctrl: renesas: rzg2l: Refactor OEN register PWPR handling
pinctrl: airoha: convert comma to semicolon
pinctrl: elkhartlake: Switch to INTEL_GPP() macro
pinctrl: cherryview: Switch to INTEL_GPP() macro
pinctrl: emmitsburg: Switch to INTEL_GPP() macro
pinctrl: denverton: Switch to INTEL_GPP() macro
pinctrl: cedarfork: Switch to INTEL_GPP() macro
pinctrl: airoha: add support for Airoha AN7583 PINs
dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
|
and 'clk-qcom' into clk-next
* clk-visconti:
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
* clk-imx:
clk: imx: add driver for imx8ulp's sim lpav
dt-bindings: clock: document 8ULP's SIM LPAV
clk: imx: imx8mp-audiomix: use devm_auxiliary_device_create() to simple code
clk: imx: Add some delay before deassert the reset
* clk-microchip:
reset: mpfs: add non-auxiliary bus probing
clk: lan966x: remove unused dt-bindings include
clk: microchip: mpfs: use regmap for clocks
dt-bindings: clk: microchip: mpfs: remove first reg region
* clk-rockchip:
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
dt-bindings: clock: rk3568: Drop CLK_NR_CLKS define
clk: rockchip: rk3568: Drop CLK_NR_CLKS usage
dt-bindings: clock: rk3568: Add SCMI clock ids
* clk-qcom: (48 commits)
clk: qcom: Mark camcc_sm7150_hws static
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
clk: qcom: ecpricc-qdu100: Add mem_enable_mask to the clock memory branch
clk: qcom: clk_mem_branch: add enable mask and invert flags
clk: qcom: mmcc-sdm660: Add missing MDSS reset
dt-bindings: clock: mmcc-sdm660: Add missing MDSS reset
clk: qcom: use different Kconfig prompts for APSS IPQ5424/6018 drivers
clk: qcom: apss-ipq5424: remove unused 'apss_clk' structure
dt-bindings: clock: qcom: Add Kaanapali Global clock controller
dt-bindings: clock: qcom: Document the Kaanapali TCSR Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add RPMHCC for Kaanapali
clk: qcom: tcsrcc-glymur: Update register offsets for clock refs
clk: qcom: gcc-qcs615: Update the SDCC clock to use shared_floor_ops
clk: qcom: camcc-sm7150: Fix PLL config of PLL2
clk: qcom: camcc-sm6350: Fix PLL config of PLL2
clk: qcom: Add NSS clock controller driver for IPQ5424
...
|
|
and 'clk-mediatek' into clk-next
* clk-socfpga:
clk: socfpga: agilex5: add clock driver for Agilex5
* clk-renesas: (35 commits)
clk: renesas: r9a09g077: Add SPI module clocks
clk: renesas: r9a09g056: Add USB3.0 clocks/resets
clk: renesas: r9a09g057: Add USB3.0 clocks/resets
clk: renesas: r9a09g047: Add RSCI clocks/resets
dt-bindings: clock: renesas,r9a09g056-cpg: Add USB3.0 core clocks
dt-bindings: clock: renesas,r9a09g057-cpg: Add USB3.0 core clocks
clk: renesas: r9a06g032: Fix memory leak in error path
clk: renesas: r9a09g077: Use devm_ helpers for divider clock registration
clk: renesas: r9a09g077: Remove stray blank line
clk: renesas: r9a09g077: Propagate rate changes to parent clocks
clk: renesas: r8a779a0: Add 3DGE module clock
clk: renesas: r8a779a0: Add ZG Core clock
clk: renesas: rcar-gen4: Add support for clock dividers in FRQCRB
dt-bindings: clock: r8a779a0: Add ZG core clock
clk: renesas: r9a09g056: Add clock and reset entries for ISP
clk: renesas: r9a09g056: Add support for PLLVDO, CRU clocks, and resets
clk: renesas: r9a09g056: Add clocks and resets for DSI and LCDC modules
clk: renesas: r9a09g077: Add TSU module clock
clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
clk: renesas: rzv2h: Add support for DSI clocks
...
* clk-cleanup:
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: spacemit: fix comment typo
clk: keystone: Fix discarded const qualifiers
clk: sprd: sc9860: Simplify with of_device_get_match_data()
* clk-samsung:
firmware: exynos-acpm: add empty method to allow compile test
MAINTAINERS: add ACPM clock bindings and driver
clk: samsung: add Exynos ACPM clock driver
firmware: exynos-acpm: register ACPM clocks pdev
firmware: exynos-acpm: add DVFS protocol
dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks
clk: samsung: clk-pll: simplify samsung_pll_lock_wait()
clk: samsung: exynosautov920: add block mfc clock support
clk: samsung: exynosautov920: add clock support
dt-bindings: clock: exynosautov920: add mfc clock definitions
dt-bindings: clock: exynosautov920: add m2m clock definitions
dt-bindings: clock: google,gs101-clock: add power-domains
* clk-mediatek:
clk: en7523: Add reset-controller support for EN7523 SoC
dt-bindings: clock: airoha: Add reset support to EN7523 clock binding
|
|
Add device tree bindings for clock and reset unit on RK3506 SoC.
Add clock and reset IDs for RK3506 SoC.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251121075350.2564860-2-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clock and reset ID defines for rv1126b.
Also add documentation for the rv1126b CRU core.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251111025738.869847-3-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add compatible string for SM8750 video clock controller and the bindings
for SM8750 Qualcomm SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-4-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc
Acked-by: Georgi Djakov <djakov@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # mtd
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings
Link: https://patch.msgid.link/20251023143957.2899600-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Update Krzysztof Kozlowski's email address to kernel.org account to stay
reachable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251021095354.86455-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
yamllint has gained a new check which checks for inconsistent quoting
(mixed " and ' quotes within a file). Fix all the cases yamllint found
so we can enable the check (once the check is in a release). As single
quotes are (slightly) preferred, use them throughout the modified files
even if double quotes are mostly used.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251015232015.846282-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell AP80x System Controller binding to DT schema format.
There's not any specific compatible for the whole block which is a
separate problem, so just the child nodes are documented. Only the
pinctrl and clock child nodes need to be converted as the GPIO node
already has a schema.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251014153040.3783896-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the Marvell CP110 System Controller binding to DT schema
format.
There's not any specific compatible for the whole block which is a
separate problem, so just the child nodes are documented. Only the
pinctrl and clock child nodes need to be converted as the GPIO node
already has a schema.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251022165509.3917655-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Introduce reset capability to EN7523 device-tree clock binding
documentation.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add documentation for i.MX8ULP's SIM LPAV module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20251104120301.913-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
into clk-for-6.19
Merge Kaanapali RPMh, TCSR and global clock controllers through a topic
branch, so they can be made available in the DeviceTree branch as well.
|
|
Add device tree bindings for the global clock controller on Qualcomm
Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-3-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add bindings documentation for TCSR Clock Controller for Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-2-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the documentation for RPMH clock controller for Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-1-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The first reg region in this binding is not exclusively for clocks, as
evidenced by the dual role of this device as a reset controller at
present. The first region is however better described by a simple-mfd
syscon, but this would have require a significant re-write of the
devicetree for the platform, so the easy way out was chosen when reset
support was first introduced. The region doesn't just contain clock and
reset registers, it also contains pinctrl and interrupt controller
functionality, so drop the region from the clock binding so that it can
be described instead by a simple-mfd syscon rather than propagate this
incorrect description of the hardware to the new pic64gx SoC.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251029-unwatched-family-e47cb29ea815@spud
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
into HEAD
Merge IPQ5424 DeviceTree bindings for the Network Subsystem clock
controller from topic branch, to gain access to binding constants.
|
|
into clk-for-6.19
Merge binding changes for IPQ5424 network subsystem clock controllers
through topic branch, to make them available for DeviceTree branch as
well.
|
|
NSS clock controller provides the clocks and resets to the networking
blocks such as PPE (Packet Process Engine) and UNIPHY (PCS) on IPQ5424
devices.
Add support for the compatible string "qcom,ipq5424-nsscc" based on the
existing IPQ9574 NSS clock controller Device Tree binding. Additionally,
update the clock names for PPE and NSS for newer SoC additions like
IPQ5424 to use generic and reusable identifiers "nss" and "ppe" without
the clock rate suffix.
Also add master/slave ids for IPQ5424 networking interfaces, which is
used by nss-ipq5424 driver for providing interconnect services using
icc-clk framework.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-7-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The Networking Subsystem (NSS) clock controller acts as both a clock
provider and an interconnect provider. The #interconnect-cells property
is needed in the Device Tree Source (DTS) to ensure that client drivers
such as the PPE driver can correctly acquire ICC clocks from the NSS ICC
provider.
Add the #interconnect-cells property to the IPQ9574 Device Tree binding
example to complete it.
Fixes: 28300ecedce4 ("dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions")
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-2-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Some of the USB4 muxes, RCGs and resets were not initially described.
Add indices for them to allow extending the driver.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251003-topic-hamoa_gcc_usb4-v2-1-61d27a14ee65@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Convert the marvell,armada3710-(sb|nb)-pinctrl binding to DT schema
format. The binding includes the "marvell,armada-3700-xtal-clock"
subnode which is simple enough to include here.
Mark interrupt-controller/#interrupt-cells as required as the users have
them and the h/w is either capable of interrupts or not.
As this syscon has 2 register ranges, syscon-common.yaml needs to be
updated to drop the restriction of 1 register entry.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add device tree clock binding definitions for CMU_MFC
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Add device tree clock binding definitions for CMU_M2M
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The CMU can be part of a power domain, so we need to allow the relevant
property 'power-domains'.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
|
