Merge branch '2023-02-07-Kconfig-cleanup-dead-code-removal'

To quote the author:
This series adds source scanning to moveconfig.py so that it can look
for Kconfig options mentioned in the source which do not appear in
Kconfig, and vice versa.

This tool is then used to clean up the unused or obsolete options
mentioned in Makefiles, along with any attached source code.

1 files changed, 0 insertions, 183 deletions

diff --git a/drivers/gpio/mpc83xx_gpio.c b/drivers/gpio/mpc83xx_gpio.c
deleted file mode 100644
index bf693c8d457..00000000000
--- a/drivers/gpio/mpc83xx_gpio.c
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Freescale MPC83xx GPIO handling.
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <mpc83xx.h>
-#include <asm/gpio.h>
-#include <asm/io.h>
-
-#ifndef CFG_MPC83XX_GPIO_0_INIT_DIRECTION
-#define CFG_MPC83XX_GPIO_0_INIT_DIRECTION 0
-#endif
-#ifndef CFG_MPC83XX_GPIO_1_INIT_DIRECTION
-#define CFG_MPC83XX_GPIO_1_INIT_DIRECTION 0
-#endif
-#ifndef CFG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN
-#define CFG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN 0
-#endif
-#ifndef CFG_MPC83XX_GPIO_1_INIT_OPEN_DRAIN
-#define CFG_MPC83XX_GPIO_1_INIT_OPEN_DRAIN 0
-#endif
-#ifndef CFG_MPC83XX_GPIO_0_INIT_VALUE
-#define CFG_MPC83XX_GPIO_0_INIT_VALUE 0
-#endif
-#ifndef CFG_MPC83XX_GPIO_1_INIT_VALUE
-#define CFG_MPC83XX_GPIO_1_INIT_VALUE 0
-#endif
-
-static unsigned int gpio_output_value[MPC83XX_GPIO_CTRLRS];
-
-/*
- * Generic_GPIO primitives.
- */
-
-int gpio_request(unsigned gpio, const char *label)
-{
-	if (gpio >= MAX_NUM_GPIOS)
-		return -1;
-
-	return 0;
-}
-
-int gpio_free(unsigned gpio)
-{
-	/* Do not set to input */
-	return 0;
-}
-
-/* set GPIO pin 'gpio' as an input */
-int gpio_direction_input(unsigned gpio)
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned int ctrlr;
-	unsigned int line;
-	unsigned int line_mask;
-
-	/* 32-bits per controller */
-	ctrlr = gpio >> 5;
-	line = gpio & (0x1F);
-
-	/* Big endian */
-	line_mask = 1 << (31 - line);
-
-	clrbits_be32(&im->gpio[ctrlr].dir, line_mask);
-
-	return 0;
-}
-
-/* set GPIO pin 'gpio' as an output, with polarity 'value' */
-int gpio_direction_output(unsigned gpio, int value)
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned int ctrlr;
-	unsigned int line;
-	unsigned int line_mask;
-
-	if (value != 0 && value != 1) {
-		printf("Error: Value parameter must be 0 or 1.\n");
-		return -1;
-	}
-
-	gpio_set_value(gpio, value);
-
-	/* 32-bits per controller */
-	ctrlr = gpio >> 5;
-	line = gpio & (0x1F);
-
-	/* Big endian */
-	line_mask = 1 << (31 - line);
-
-	/* Make the line output */
-	setbits_be32(&im->gpio[ctrlr].dir, line_mask);
-
-	return 0;
-}
-
-/* read GPIO IN value of pin 'gpio' */
-int gpio_get_value(unsigned gpio)
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned int ctrlr;
-	unsigned int line;
-	unsigned int line_mask;
-
-	/* 32-bits per controller */
-	ctrlr = gpio >> 5;
-	line = gpio & (0x1F);
-
-	/* Big endian */
-	line_mask = 1 << (31 - line);
-
-	/* Read the value and mask off the bit */
-	return (in_be32(&im->gpio[ctrlr].dat) & line_mask) != 0;
-}
-
-/* write GPIO OUT value to pin 'gpio' */
-int gpio_set_value(unsigned gpio, int value)
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-	unsigned int ctrlr;
-	unsigned int line;
-	unsigned int line_mask;
-
-	if (value != 0 && value != 1) {
-		printf("Error: Value parameter must be 0 or 1.\n");
-		return -1;
-	}
-
-	/* 32-bits per controller */
-	ctrlr = gpio >> 5;
-	line = gpio & (0x1F);
-
-	/* Big endian */
-	line_mask = 1 << (31 - line);
-
-	/* Update the local output buffer soft copy */
-	gpio_output_value[ctrlr] =
-		(gpio_output_value[ctrlr] & ~line_mask) | \
-			(value ? line_mask : 0);
-
-	/* Write the output */
-	out_be32(&im->gpio[ctrlr].dat, gpio_output_value[ctrlr]);
-
-	return 0;
-}
-
-/* Configure GPIO registers early */
-void mpc83xx_gpio_init_f(void)
-{
-	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
-#if MPC83XX_GPIO_CTRLRS >= 1
-	out_be32(&im->gpio[0].dir, CFG_MPC83XX_GPIO_0_INIT_DIRECTION);
-	out_be32(&im->gpio[0].odr, CFG_MPC83XX_GPIO_0_INIT_OPEN_DRAIN);
-	out_be32(&im->gpio[0].dat, CFG_MPC83XX_GPIO_0_INIT_VALUE);
-	out_be32(&im->gpio[0].ier, 0xFFFFFFFF); /* Clear all events */
-	out_be32(&im->gpio[0].imr, 0);
-	out_be32(&im->gpio[0].icr, 0);
-#endif
-
-#if MPC83XX_GPIO_CTRLRS >= 2
-	out_be32(&im->gpio[1].dir, CFG_MPC83XX_GPIO_1_INIT_DIRECTION);
-	out_be32(&im->gpio[1].odr, CFG_MPC83XX_GPIO_1_INIT_OPEN_DRAIN);
-	out_be32(&im->gpio[1].dat, CFG_MPC83XX_GPIO_1_INIT_VALUE);
-	out_be32(&im->gpio[1].ier, 0xFFFFFFFF); /* Clear all events */
-	out_be32(&im->gpio[1].imr, 0);
-	out_be32(&im->gpio[1].icr, 0);
-#endif
-}
-
-/* Initialize GPIO soft-copies */
-void mpc83xx_gpio_init_r(void)
-{
-#if MPC83XX_GPIO_CTRLRS >= 1
-	gpio_output_value[0] = CFG_MPC83XX_GPIO_0_INIT_VALUE;
-#endif
-
-#if MPC83XX_GPIO_CTRLRS >= 2
-	gpio_output_value[1] = CFG_MPC83XX_GPIO_1_INIT_VALUE;
-#endif
-}