Merge branch '2023-02-07-Kconfig-cleanup-dead-code-removal'

To quote the author:
This series adds source scanning to moveconfig.py so that it can look
for Kconfig options mentioned in the source which do not appear in
Kconfig, and vice versa.

This tool is then used to clean up the unused or obsolete options
mentioned in Makefiles, along with any attached source code.

9 files changed, 0 insertions, 1273 deletions

diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index ddc36632069..8dad36f9369 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_USB_OHCI_NEW) += ohci-hcd.o
 obj-$(CONFIG_USB_ATMEL) += ohci-at91.o
 obj-$(CONFIG_USB_OHCI_DA8XX) += ohci-da8xx.o
 obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
-obj-$(CONFIG_USB_SL811HS) += sl811-hcd.o
 obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o
 obj-$(CONFIG_USB_OHCI_PCI) += ohci-pci.o
 obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o
@@ -25,10 +24,8 @@ obj-$(CONFIG_USB_OHCI_NPCM) += ohci-npcm.o
 
 # echi
 obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
-obj-$(CONFIG_USB_EHCI_ARMADA100) += ehci-armada100.o utmi-armada100.o
 obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o
 obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
-obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o
 obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o
 obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
 obj-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
@@ -41,9 +38,7 @@ obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
 obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
 obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
 obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
-obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
 obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o
-obj-$(CONFIG_USB_EHCI_RMOBILE) += ehci-rmobile.o
 obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
 
 # xhci
diff --git a/drivers/usb/host/ehci-armada100.c b/drivers/usb/host/ehci-armada100.c
deleted file mode 100644
index 2ce9f27b862..00000000000
--- a/drivers/usb/host/ehci-armada100.c
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2012
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * This driver is based on Kirkwood echi driver
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <usb.h>
-#include "ehci.h"
-#include <asm/arch/cpu.h>
-#include <asm/arch/armada100.h>
-#include <asm/arch/utmi-armada100.h>
-
-/*
- * EHCI host controller init
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	if (utmi_init() < 0)
-		return -1;
-
-	*hccr = (struct ehci_hccr *)(ARMD1_USB_HOST_BASE + 0x100);
-	*hcor = (struct ehci_hcor *)((uint32_t) *hccr
-			+ HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
-	debug("armada100-ehci: init hccr %x and hcor %x hc_length %d\n",
-		(uint32_t)*hccr, (uint32_t)*hcor,
-		(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
-
-	return 0;
-}
-
-/*
- * EHCI host controller stop
- */
-int ehci_hcd_stop(int index)
-{
-	return 0;
-}
diff --git a/drivers/usb/host/ehci-faraday.c b/drivers/usb/host/ehci-faraday.c
deleted file mode 100644
index 85a35269601..00000000000
--- a/drivers/usb/host/ehci-faraday.c
+++ /dev/null
@@ -1,144 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Faraday USB 2.0 EHCI Controller
- *
- * (C) Copyright 2010 Faraday Technology
- * Dante Su <dantesu@faraday-tech.com>
- */
-
-#include <common.h>
-#include <log.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <linux/delay.h>
-#include <usb/fusbh200.h>
-#include <usb/fotg210.h>
-
-#include "ehci.h"
-
-#ifndef CFG_USB_EHCI_BASE_LIST
-#define CFG_USB_EHCI_BASE_LIST	{ CONFIG_USB_EHCI_BASE }
-#endif
-
-union ehci_faraday_regs {
-	struct fusbh200_regs usb;
-	struct fotg210_regs  otg;
-};
-
-static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs)
-{
-	return !readl(&regs->usb.easstr);
-}
-
-void faraday_ehci_set_usbmode(struct ehci_ctrl *ctrl)
-{
-	/* nothing needs to be done */
-}
-
-int faraday_ehci_get_port_speed(struct ehci_ctrl *ctrl, uint32_t reg)
-{
-	int spd, ret = PORTSC_PSPD_HS;
-	union ehci_faraday_regs *regs;
-
-	ret = (void __iomem *)((ulong)ctrl->hcor - 0x10);
-	if (ehci_is_fotg2xx(regs))
-		spd = OTGCSR_SPD(readl(&regs->otg.otgcsr));
-	else
-		spd = BMCSR_SPD(readl(&regs->usb.bmcsr));
-
-	switch (spd) {
-	case 0:    /* full speed */
-		ret = PORTSC_PSPD_FS;
-		break;
-	case 1:    /* low  speed */
-		ret = PORTSC_PSPD_LS;
-		break;
-	case 2:    /* high speed */
-		ret = PORTSC_PSPD_HS;
-		break;
-	default:
-		printf("ehci-faraday: invalid device speed\n");
-		break;
-	}
-
-	return ret;
-}
-
-uint32_t *faraday_ehci_get_portsc_register(struct ehci_ctrl *ctrl, int port)
-{
-	/* Faraday EHCI has one and only one portsc register */
-	if (port) {
-		/* Printing the message would cause a scan failure! */
-		debug("The request port(%d) is not configured\n", port);
-		return NULL;
-	}
-
-	/* Faraday EHCI PORTSC register offset is 0x20 from hcor */
-	return (uint32_t *)((uint8_t *)ctrl->hcor + 0x20);
-}
-
-static const struct ehci_ops faraday_ehci_ops = {
-	.set_usb_mode		= faraday_ehci_set_usbmode,
-	.get_port_speed		= faraday_ehci_get_port_speed,
-	.get_portsc_register	= faraday_ehci_get_portsc_register,
-};
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **ret_hccr, struct ehci_hcor **ret_hcor)
-{
-	struct ehci_hccr *hccr;
-	struct ehci_hcor *hcor;
-	union ehci_faraday_regs *regs;
-	uint32_t base_list[] = CFG_USB_EHCI_BASE_LIST;
-
-	if (index < 0 || index >= ARRAY_SIZE(base_list))
-		return -1;
-	ehci_set_controller_priv(index, NULL, &faraday_ehci_ops);
-	regs = (void __iomem *)base_list[index];
-	hccr = (struct ehci_hccr *)&regs->usb.hccr;
-	hcor = (struct ehci_hcor *)&regs->usb.hcor;
-
-	if (ehci_is_fotg2xx(regs)) {
-		/* A-device bus reset */
-		/* ... Power off A-device */
-		setbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSDROP);
-		/* ... Drop vbus and bus traffic */
-		clrbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSREQ);
-		mdelay(1);
-		/* ... Power on A-device */
-		clrbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSDROP);
-		/* ... Drive vbus and bus traffic */
-		setbits_le32(&regs->otg.otgcsr, OTGCSR_A_BUSREQ);
-		mdelay(1);
-		/* Disable OTG & DEV interrupts, triggered at level-high */
-		writel(IMR_IRQLH | IMR_OTG | IMR_DEV, &regs->otg.imr);
-		/* Clear all interrupt status */
-		writel(ISR_HOST | ISR_OTG | ISR_DEV, &regs->otg.isr);
-	} else {
-		/* Interrupt=level-high */
-		setbits_le32(&regs->usb.bmcsr, BMCSR_IRQLH);
-		/* VBUS on */
-		clrbits_le32(&regs->usb.bmcsr, BMCSR_VBUS_OFF);
-		/* Disable all interrupts */
-		writel(0x00, &regs->usb.bmier);
-		writel(0x1f, &regs->usb.bmisr);
-	}
-
-	*ret_hccr = hccr;
-	*ret_hcor = hcor;
-
-	return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
-	return 0;
-}
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9139d61dd0c..9839aa17492 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -705,12 +705,10 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
 		dev->act_len = length - QT_TOKEN_GET_TOTALBYTES(qhtoken);
 	} else {
 		dev->act_len = 0;
-#ifndef CONFIG_USB_EHCI_FARADAY
 		debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n",
 		      dev->devnum, ehci_readl(&ctrl->hcor->or_usbsts),
 		      ehci_readl(&ctrl->hcor->or_portsc[0]),
 		      ehci_readl(&ctrl->hcor->or_portsc[1]));
-#endif
 	}
 
 	free(qtd);
@@ -1190,9 +1188,6 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
 	if (rc)
 		return rc;
 #endif
-#ifdef CONFIG_USB_EHCI_FARADAY
-	tweaks |= EHCI_TWEAK_NO_INIT_CF;
-#endif
 	rc = ehci_common_init(ctrl, tweaks);
 	if (rc)
 		return rc;
diff --git a/drivers/usb/host/ehci-rmobile.c b/drivers/usb/host/ehci-rmobile.c
deleted file mode 100644
index 60525f22867..00000000000
--- a/drivers/usb/host/ehci-rmobile.c
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *  EHCI HCD (Host Controller Driver) for USB.
- *
- *  Copyright (C) 2013,2014 Renesas Electronics Corporation
- *  Copyright (C) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/ehci-rmobile.h>
-#include <linux/delay.h>
-#include "ehci.h"
-
-#if defined(CONFIG_R8A7740)
-static u32 usb_base_address[] = {
-	0xC6700000
-};
-#elif defined(CONFIG_R8A7790)
-static u32 usb_base_address[] = {
-	0xEE080000,	/* USB0 (EHCI) */
-	0xEE0A0000,	/* USB1 */
-	0xEE0C0000,	/* USB2 */
-};
-#elif defined(CONFIG_R8A7791) || defined(CONFIG_R8A7793) || \
-	defined(CONFIG_R8A7794)
-static u32 usb_base_address[] = {
-	0xEE080000,	/* USB0 (EHCI) */
-	0xEE0C0000,	/* USB1 */
-};
-#else
-#error rmobile EHCI USB driver not supported on this platform
-#endif
-
-int ehci_hcd_stop(int index)
-{
-	int i;
-	u32 base;
-	struct ahbcom_pci_bridge *ahbcom_pci;
-
-	base = usb_base_address[index];
-	ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET);
-	writel(0, &ahbcom_pci->ahb_bus_ctr);
-
-	/* reset ehci */
-	setbits_le32(base + EHCI_USBCMD, CMD_RESET);
-	for (i = 100; i > 0; i--) {
-		if (!(readl(base + EHCI_USBCMD) & CMD_RESET))
-			break;
-		udelay(100);
-	}
-
-	if (!i)
-		printf("error : ehci(%d) reset failed.\n", index);
-
-	if (index == (ARRAY_SIZE(usb_base_address) - 1))
-		setbits_le32(SMSTPCR7, SMSTPCR703);
-
-	return 0;
-}
-
-int ehci_hcd_init(int index, enum usb_init_type init,
-	struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	u32 base;
-	u32 phys_base;
-	struct rmobile_ehci_reg *rehci;
-	struct ahbcom_pci_bridge *ahbcom_pci;
-	struct ahbconf_pci_bridge *ahbconf_pci;
-	struct ahb_pciconf *ahb_pciconf_ohci;
-	struct ahb_pciconf *ahb_pciconf_ehci;
-	uint32_t cap_base;
-
-	base = usb_base_address[index];
-	phys_base = base;
-	if (index == 0)
-		clrbits_le32(SMSTPCR7, SMSTPCR703);
-
-	rehci = (struct rmobile_ehci_reg *)(base + EHCI_OFFSET);
-	ahbcom_pci = (struct ahbcom_pci_bridge *)(base + AHBPCI_OFFSET);
-	ahbconf_pci =
-		(struct ahbconf_pci_bridge *)(base + PCI_CONF_AHBPCI_OFFSET);
-	ahb_pciconf_ohci = (struct ahb_pciconf *)(base + PCI_CONF_OHCI_OFFSET);
-	ahb_pciconf_ehci = (struct ahb_pciconf *)(base + PCI_CONF_EHCI_OFFSET);
-
-	/* Clock & Reset & Direct Power Down */
-	clrsetbits_le32(&ahbcom_pci->usbctr,
-			(DIRPD | PCICLK_MASK | USBH_RST), USBCTR_WIN_SIZE_1GB);
-	clrbits_le32(&ahbcom_pci->usbctr, PLL_RST);
-
-	/* AHB-PCI Bridge Communication Registers */
-	writel(AHB_BUS_CTR_INIT, &ahbcom_pci->ahb_bus_ctr);
-	writel((CFG_SYS_SDRAM_BASE & 0xf0000000) | PCIAHB_WIN_PREFETCH,
-	       &ahbcom_pci->pciahb_win1_ctr);
-	writel(0xf0000000 | PCIAHB_WIN_PREFETCH,
-	       &ahbcom_pci->pciahb_win2_ctr);
-	writel(phys_base | PCIWIN2_PCICMD, &ahbcom_pci->ahbpci_win2_ctr);
-
-	setbits_le32(&ahbcom_pci->pci_arbiter_ctr,
-		     PCIBP_MODE | PCIREQ1 | PCIREQ0);
-
-	/* PCI Configuration Registers for AHBPCI */
-	writel(PCIWIN1_PCICMD | AHB_CFG_AHBPCI,
-	       &ahbcom_pci->ahbpci_win1_ctr);
-	writel(phys_base + AHBPCI_OFFSET, &ahbconf_pci->basead);
-	writel(CFG_SYS_SDRAM_BASE & 0xf0000000, &ahbconf_pci->win1_basead);
-	writel(0xf0000000, &ahbconf_pci->win2_basead);
-	writel(SERREN | PERREN | MASTEREN | MEMEN,
-	       &ahbconf_pci->cmnd_sts);
-
-	/* PCI Configuration Registers for EHCI */
-	writel(PCIWIN1_PCICMD | AHB_CFG_HOST, &ahbcom_pci->ahbpci_win1_ctr);
-	writel(phys_base + OHCI_OFFSET, &ahb_pciconf_ohci->basead);
-	writel(phys_base + EHCI_OFFSET, &ahb_pciconf_ehci->basead);
-	writel(SERREN | PERREN | MASTEREN | MEMEN,
-	       &ahb_pciconf_ohci->cmnd_sts);
-	writel(SERREN | PERREN | MASTEREN | MEMEN,
-	       &ahb_pciconf_ehci->cmnd_sts);
-
-	/* Enable PCI interrupt */
-	setbits_le32(&ahbcom_pci->pci_int_enable,
-		     USBH_PMEEN | USBH_INTBEN | USBH_INTAEN);
-
-	*hccr = (struct ehci_hccr *)((uint32_t)&rehci->hciversion);
-	cap_base = ehci_readl(&(*hccr)->cr_capbase);
-	*hcor = (struct ehci_hcor *)((uint32_t)*hccr + HC_LENGTH(cap_base));
-
-	return 0;
-}
diff --git a/drivers/usb/host/ehci-vct.c b/drivers/usb/host/ehci-vct.c
deleted file mode 100644
index 7167f82b481..00000000000
--- a/drivers/usb/host/ehci-vct.c
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2009 Stefan Roese <sr@denx.de>, DENX Software Engineering
- */
-
-#include <common.h>
-#include <usb.h>
-
-#include "ehci.h"
-
-int vct_ehci_hcd_init(u32 *hccr, u32 *hcor);
-
-/*
- * Create the appropriate control structures to manage
- * a new EHCI host controller.
- */
-int ehci_hcd_init(int index, enum usb_init_type init,
-		struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-	int ret;
-	u32 vct_hccr;
-	u32 vct_hcor;
-
-	/*
-	 * Init VCT specific stuff
-	 */
-	ret = vct_ehci_hcd_init(&vct_hccr, &vct_hcor);
-	if (ret)
-		return ret;
-
-	*hccr = (struct ehci_hccr *)vct_hccr;
-	*hcor = (struct ehci_hcor *)vct_hcor;
-
-	return 0;
-}
-
-/*
- * Destroy the appropriate control structures corresponding
- * the the EHCI host controller.
- */
-int ehci_hcd_stop(int index)
-{
-	return 0;
-}
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
deleted file mode 100644
index 7c823f241a8..00000000000
--- a/drivers/usb/host/sl811-hcd.c
+++ /dev/null
@@ -1,714 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This code is based on linux driver for sl811hs chip, source at
- * drivers/usb/host/sl811.c:
- *
- * SL811 Host Controller Interface driver for USB.
- *
- * Copyright (c) 2003/06, Courage Co., Ltd.
- *
- * Based on:
- *	1.uhci.c by Linus Torvalds, Johannes Erdfelt, Randy Dunlap,
- *	  Georg Acher, Deti Fliegl, Thomas Sailer, Roman Weissgaerber,
- *	  Adam Richter, Gregory P. Smith;
- *	2.Original SL811 driver (hc_sl811.o) by Pei Liu <pbl@cypress.com>
- *	3.Rewrited as sl811.o by Yin Aihua <yinah:couragetech.com.cn>
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <usb.h>
-#include <linux/delay.h>
-#include "sl811.h"
-
-#include "../../../board/kup/common/kup.h"
-
-#ifdef __PPC__
-# define EIEIO		__asm__ volatile ("eieio")
-#else
-# define EIEIO		/* nothing */
-#endif
-
-#define	 SL811_ADR (0x50000000)
-#define	 SL811_DAT (0x50000001)
-
-#ifdef SL811_DEBUG
-static int debug = 9;
-#endif
-
-static int root_hub_devnum = 0;
-static struct usb_port_status rh_status = { 0 };/* root hub port status */
-
-static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
-			       void *data, int buf_len, struct devrequest *cmd);
-
-static void sl811_write (__u8 index, __u8 data)
-{
-	*(volatile unsigned char *) (SL811_ADR) = index;
-	EIEIO;
-	*(volatile unsigned char *) (SL811_DAT) = data;
-	EIEIO;
-}
-
-static __u8 sl811_read (__u8 index)
-{
-	__u8 data;
-
-	*(volatile unsigned char *) (SL811_ADR) = index;
-	EIEIO;
-	data = *(volatile unsigned char *) (SL811_DAT);
-	EIEIO;
-	return (data);
-}
-
-/*
- * Read consecutive bytes of data from the SL811H/SL11H buffer
- */
-static void inline sl811_read_buf(__u8 offset, __u8 *buf, __u8 size)
-{
-	*(volatile unsigned char *) (SL811_ADR) = offset;
-	EIEIO;
-	while (size--) {
-		*buf++ = *(volatile unsigned char *) (SL811_DAT);
-		EIEIO;
-	}
-}
-
-/*
- * Write consecutive bytes of data to the SL811H/SL11H buffer
- */
-static void inline sl811_write_buf(__u8 offset, __u8 *buf, __u8 size)
-{
-	*(volatile unsigned char *) (SL811_ADR) = offset;
-	EIEIO;
-	while (size--) {
-		*(volatile unsigned char *) (SL811_DAT) = *buf++;
-		EIEIO;
-	}
-}
-
-int usb_init_kup4x (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	int i;
-	unsigned char tmp;
-
-	memctl = &immap->im_memctl;
-	memctl->memc_or7 = 0xFFFF8726;
-	memctl->memc_br7 = 0x50000401;	/* start at 0x50000000 */
-	/* BP 14 low = USB ON */
-	immap->im_cpm.cp_pbdat &= ~(BP_USB_VCC);
-	/* PB 14 nomal port */
-	immap->im_cpm.cp_pbpar &= ~(BP_USB_VCC);
-	/* output */
-	immap->im_cpm.cp_pbdir |= (BP_USB_VCC);
-
-	puts ("USB:   ");
-
-	for (i = 0x10; i < 0xff; i++) {
-		sl811_write(i, i);
-		tmp = (sl811_read(i));
-		if (tmp != i) {
-			printf ("SL811 compare error index=0x%02x read=0x%02x\n", i, tmp);
-			return (-1);
-		}
-	}
-	printf ("SL811 ready\n");
-	return (0);
-}
-
-/*
- * This function resets SL811HS controller and detects the speed of
- * the connecting device
- *
- * Return: 0 = no device attached; 1 = USB device attached
- */
-static int sl811_hc_reset(void)
-{
-	int status ;
-
-	sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
-	sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
-
-	mdelay(20);
-
-	/* Disable hardware SOF generation, clear all irq status. */
-	sl811_write(SL811_CTRL1, 0);
-	mdelay(2);
-	sl811_write(SL811_INTRSTS, 0xff);
-	status = sl811_read(SL811_INTRSTS);
-
-	if (status & SL811_INTR_NOTPRESENT) {
-		/* Device is not present */
-		PDEBUG(0, "Device not present\n");
-		rh_status.wPortStatus &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE);
-		rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
-		sl811_write(SL811_INTR, SL811_INTR_INSRMV);
-		return 0;
-	}
-
-	/* Send SOF to address 0, endpoint 0. */
-	sl811_write(SL811_LEN_B, 0);
-	sl811_write(SL811_PIDEP_B, PIDEP(USB_PID_SOF, 0));
-	sl811_write(SL811_DEV_B, 0x00);
-	sl811_write(SL811_SOFLOW, SL811_12M_LOW);
-
-	if (status & SL811_INTR_SPEED_FULL) {
-		/* full speed device connect directly to root hub */
-		PDEBUG (0, "Full speed Device attached\n");
-
-		sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
-		mdelay(20);
-		sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_12M_HI);
-		sl811_write(SL811_CTRL1, SL811_CTRL1_SOF);
-
-		/* start the SOF or EOP */
-		sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
-		rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION;
-		rh_status.wPortStatus &= ~USB_PORT_STAT_LOW_SPEED;
-		mdelay(2);
-		sl811_write(SL811_INTRSTS, 0xff);
-	} else {
-		/* slow speed device connect directly to root-hub */
-		PDEBUG(0, "Low speed Device attached\n");
-
-		sl811_write(SL811_CTRL1, SL811_CTRL1_RESET);
-		mdelay(20);
-		sl811_write(SL811_CTRL2, SL811_CTL2_HOST | SL811_CTL2_DSWAP | SL811_12M_HI);
-		sl811_write(SL811_CTRL1, SL811_CTRL1_SPEED_LOW | SL811_CTRL1_SOF);
-
-		/* start the SOF or EOP */
-		sl811_write(SL811_CTRL_B, SL811_USB_CTRL_ARM);
-		rh_status.wPortStatus |= USB_PORT_STAT_CONNECTION | USB_PORT_STAT_LOW_SPEED;
-		mdelay(2);
-		sl811_write(SL811_INTRSTS, 0xff);
-	}
-
-	rh_status.wPortChange |= USB_PORT_STAT_C_CONNECTION;
-	sl811_write(SL811_INTR, /*SL811_INTR_INSRMV*/SL811_INTR_DONE_A);
-
-	return 1;
-}
-
-int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
-{
-	root_hub_devnum = 0;
-	sl811_hc_reset();
-	return 0;
-}
-
-int usb_lowlevel_stop(int index)
-{
-	sl811_hc_reset();
-	return 0;
-}
-
-static int calc_needed_buswidth(int bytes, int need_preamble)
-{
-	return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048;
-}
-
-static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len)
-{
-	__u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE;
-	__u16 status = 0;
-	int err = 0, time_start = get_timer(0);
-	int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
-		(dev->speed == USB_SPEED_LOW);
-
-	if (len > 239)
-		return -1;
-
-	if (usb_pipeout(pipe))
-		ctrl |= SL811_USB_CTRL_DIR_OUT;
-	if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
-		ctrl |= SL811_USB_CTRL_TOGGLE_1;
-	if (need_preamble)
-		ctrl |= SL811_USB_CTRL_PREAMBLE;
-
-	sl811_write(SL811_INTRSTS, 0xff);
-
-	while (err < 3) {
-		sl811_write(SL811_ADDR_A, 0x10);
-		sl811_write(SL811_LEN_A, len);
-		if (usb_pipeout(pipe) && len)
-			sl811_write_buf(0x10, buffer, len);
-
-		if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
-		    sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble))
-			ctrl |= SL811_USB_CTRL_SOF;
-		else
-			ctrl &= ~SL811_USB_CTRL_SOF;
-
-		sl811_write(SL811_CTRL_A, ctrl);
-		while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
-			if (5*CONFIG_SYS_HZ < get_timer(time_start)) {
-				printf("USB transmit timed out\n");
-				return -USB_ST_CRC_ERR;
-			}
-		}
-
-		sl811_write(SL811_INTRSTS, 0xff);
-		status = sl811_read(SL811_STS_A);
-
-		if (status & SL811_USB_STS_ACK) {
-			int remainder = sl811_read(SL811_CNT_A);
-			if (remainder) {
-				PDEBUG(0, "usb transfer remainder = %d\n", remainder);
-				len -= remainder;
-			}
-			if (usb_pipein(pipe) && len)
-				sl811_read_buf(0x10, buffer, len);
-			return len;
-		}
-
-		if ((status & SL811_USB_STS_NAK) == SL811_USB_STS_NAK)
-			continue;
-
-		PDEBUG(0, "usb transfer error %#x\n", (int)status);
-		err++;
-	}
-
-	err = 0;
-
-	if (status & SL811_USB_STS_ERROR)
-		err |= USB_ST_BUF_ERR;
-	if (status & SL811_USB_STS_TIMEOUT)
-		err |= USB_ST_CRC_ERR;
-	if (status & SL811_USB_STS_STALL)
-		err |= USB_ST_STALLED;
-
-	return -err;
-}
-
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		    int len)
-{
-	int dir_out = usb_pipeout(pipe);
-	int ep = usb_pipeendpoint(pipe);
-	int max = usb_maxpacket(dev, pipe);
-	int done = 0;
-
-	PDEBUG(7, "dev = %ld pipe = %ld buf = %p size = %d dir_out = %d\n",
-	       usb_pipedevice(pipe), usb_pipeendpoint(pipe), buffer, len, dir_out);
-
-	dev->status = 0;
-
-	sl811_write(SL811_DEV_A, usb_pipedevice(pipe));
-	sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep));
-	while (done < len) {
-		int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
-					    max > len - done ? len - done : max);
-		if (res < 0) {
-			dev->status = -res;
-			return res;
-		}
-
-		if (!dir_out && res < max) /* short packet */
-			break;
-
-		done += res;
-		usb_dotoggle(dev, ep, dir_out);
-	}
-
-	dev->act_len = done;
-
-	return 0;
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		       int len,struct devrequest *setup)
-{
-	int done = 0;
-	int devnum = usb_pipedevice(pipe);
-	int ep = usb_pipeendpoint(pipe);
-
-	dev->status = 0;
-
-	if (devnum == root_hub_devnum)
-		return sl811_rh_submit_urb(dev, pipe, buffer, len, setup);
-
-	PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n",
-	       devnum, ep, buffer, len, (int)setup->requesttype,
-	       (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64);
-
-	sl811_write(SL811_DEV_A, devnum);
-	sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep));
-	/* setup phase */
-	usb_settoggle(dev, ep, 1, 0);
-	if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep),
-			      (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) {
-		int dir_in = usb_pipein(pipe);
-		int max = usb_maxpacket(dev, pipe);
-
-		/* data phase */
-		sl811_write(SL811_PIDEP_A,
-			    PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep));
-		usb_settoggle(dev, ep, usb_pipeout(pipe), 1);
-		while (done < len) {
-			int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
-						    max > len - done ? len - done : max);
-			if (res < 0) {
-				PDEBUG(0, "status data failed!\n");
-				dev->status = -res;
-				return 0;
-			}
-			done += res;
-			usb_dotoggle(dev, ep, usb_pipeout(pipe));
-			if (dir_in && res < max) /* short packet */
-				break;
-		}
-
-		/* status phase */
-		sl811_write(SL811_PIDEP_A,
-			    PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep));
-		usb_settoggle(dev, ep, !usb_pipeout(pipe), 1);
-		if (sl811_send_packet(dev,
-				      !dir_in ? usb_rcvctrlpipe(dev, ep) :
-				      usb_sndctrlpipe(dev, ep),
-				      0, 0) < 0) {
-			PDEBUG(0, "status phase failed!\n");
-			dev->status = -1;
-		}
-	} else {
-		PDEBUG(0, "setup phase failed!\n");
-		dev->status = -1;
-	}
-
-	dev->act_len = done;
-
-	return done;
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		   int len, int interval, bool nonblock)
-{
-	PDEBUG(0, "dev = %p pipe = %#lx buf = %p size = %d int = %d\n", dev, pipe,
-	       buffer, len, interval);
-	return -1;
-}
-
-/*
- * SL811 Virtual Root Hub
- */
-
-/* Device descriptor */
-static __u8 sl811_rh_dev_des[] =
-{
-	0x12,	    /*	__u8  bLength; */
-	0x01,	    /*	__u8  bDescriptorType; Device */
-	0x10,	    /*	__u16 bcdUSB; v1.1 */
-	0x01,
-	0x09,	    /*	__u8  bDeviceClass; HUB_CLASSCODE */
-	0x00,	    /*	__u8  bDeviceSubClass; */
-	0x00,	    /*	__u8  bDeviceProtocol; */
-	0x08,	    /*	__u8  bMaxPacketSize0; 8 Bytes */
-	0x00,	    /*	__u16 idVendor; */
-	0x00,
-	0x00,	    /*	__u16 idProduct; */
-	0x00,
-	0x00,	    /*	__u16 bcdDevice; */
-	0x00,
-	0x00,	    /*	__u8  iManufacturer; */
-	0x02,	    /*	__u8  iProduct; */
-	0x01,	    /*	__u8  iSerialNumber; */
-	0x01	    /*	__u8  bNumConfigurations; */
-};
-
-/* Configuration descriptor */
-static __u8 sl811_rh_config_des[] =
-{
-	0x09,	    /*	__u8  bLength; */
-	0x02,	    /*	__u8  bDescriptorType; Configuration */
-	0x19,	    /*	__u16 wTotalLength; */
-	0x00,
-	0x01,	    /*	__u8  bNumInterfaces; */
-	0x01,	    /*	__u8  bConfigurationValue; */
-	0x00,	    /*	__u8  iConfiguration; */
-	0x40,	    /*	__u8  bmAttributes;
-		    Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup,
-		    4..0: resvd */
-	0x00,	    /*	__u8  MaxPower; */
-
-	/* interface */
-	0x09,	    /*	__u8  if_bLength; */
-	0x04,	    /*	__u8  if_bDescriptorType; Interface */
-	0x00,	    /*	__u8  if_bInterfaceNumber; */
-	0x00,	    /*	__u8  if_bAlternateSetting; */
-	0x01,	    /*	__u8  if_bNumEndpoints; */
-	0x09,	    /*	__u8  if_bInterfaceClass; HUB_CLASSCODE */
-	0x00,	    /*	__u8  if_bInterfaceSubClass; */
-	0x00,	    /*	__u8  if_bInterfaceProtocol; */
-	0x00,	    /*	__u8  if_iInterface; */
-
-	/* endpoint */
-	0x07,	    /*	__u8  ep_bLength; */
-	0x05,	    /*	__u8  ep_bDescriptorType; Endpoint */
-	0x81,	    /*	__u8  ep_bEndpointAddress; IN Endpoint 1 */
-	0x03,	    /*	__u8  ep_bmAttributes; Interrupt */
-	0x08,	    /*	__u16 ep_wMaxPacketSize; */
-	0x00,
-	0xff	    /*	__u8  ep_bInterval; 255 ms */
-};
-
-/* root hub class descriptor*/
-static __u8 sl811_rh_hub_des[] =
-{
-	0x09,			/*  __u8  bLength; */
-	0x29,			/*  __u8  bDescriptorType; Hub-descriptor */
-	0x01,			/*  __u8  bNbrPorts; */
-	0x00,			/* __u16  wHubCharacteristics; */
-	0x00,
-	0x50,			/*  __u8  bPwrOn2pwrGood; 2ms */
-	0x00,			/*  __u8  bHubContrCurrent; 0 mA */
-	0xfc,			/*  __u8  DeviceRemovable; *** 7 Ports max *** */
-	0xff			/*  __u8  PortPwrCtrlMask; *** 7 ports max *** */
-};
-
-/*
- * helper routine for returning string descriptors in UTF-16LE
- * input can actually be ISO-8859-1; ASCII is its 7-bit subset
- */
-static int ascii2utf (char *s, u8 *utf, int utfmax)
-{
-	int retval;
-
-	for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) {
-		*utf++ = *s++;
-		*utf++ = 0;
-	}
-	return retval;
-}
-
-/*
- * root_hub_string is used by each host controller's root hub code,
- * so that they're identified consistently throughout the system.
- */
-static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len)
-{
-	char buf [30];
-
-	/* assert (len > (2 * (sizeof (buf) + 1)));
-	   assert (strlen (type) <= 8);*/
-
-	/* language ids */
-	if (id == 0) {
-		*data++ = 4; *data++ = 3;	/* 4 bytes data */
-		*data++ = 0; *data++ = 0;	/* some language id */
-		return 4;
-
-	/* serial number */
-	} else if (id == 1) {
-		sprintf (buf, "%#x", serial);
-
-	/* product description */
-	} else if (id == 2) {
-		sprintf (buf, "USB %s Root Hub", type);
-
-	/* id 3 == vendor description */
-
-	/* unsupported IDs --> "stall" */
-	} else
-	    return 0;
-
-	ascii2utf (buf, data + 2, len - 2);
-	data [0] = 2 + strlen(buf) * 2;
-	data [1] = 3;
-	return data [0];
-}
-
-/* helper macro */
-#define OK(x)	len = (x); break
-
-/*
- * This function handles all USB request to the the virtual root hub
- */
-static int sl811_rh_submit_urb(struct usb_device *usb_dev, unsigned long pipe,
-			       void *data, int buf_len, struct devrequest *cmd)
-{
-	__u8 data_buf[16];
-	__u8 *bufp = data_buf;
-	int len = 0;
-	int status = 0;
-	__u16 bmRType_bReq;
-	__u16 wValue  = le16_to_cpu (cmd->value);
-	__u16 wLength = le16_to_cpu (cmd->length);
-#ifdef SL811_DEBUG
-	__u16 wIndex  = le16_to_cpu (cmd->index);
-#endif
-
-	if (usb_pipeint(pipe)) {
-		PDEBUG(0, "interrupt transfer unimplemented!\n");
-		return 0;
-	}
-
-	bmRType_bReq  = cmd->requesttype | (cmd->request << 8);
-
-	PDEBUG(5, "submit rh urb, req = %d(%x) val = %#x index = %#x len=%d\n",
-	       bmRType_bReq, bmRType_bReq, wValue, wIndex, wLength);
-
-	/* Request Destination:
-		   without flags: Device,
-		   USB_RECIP_INTERFACE: interface,
-		   USB_RECIP_ENDPOINT: endpoint,
-		   USB_TYPE_CLASS means HUB here,
-		   USB_RECIP_OTHER | USB_TYPE_CLASS  almost ever means HUB_PORT here
-	*/
-	switch (bmRType_bReq) {
-	case RH_GET_STATUS:
-		*(__u16 *)bufp = cpu_to_le16(1);
-		OK(2);
-
-	case RH_GET_STATUS | USB_RECIP_INTERFACE:
-		*(__u16 *)bufp = cpu_to_le16(0);
-		OK(2);
-
-	case RH_GET_STATUS | USB_RECIP_ENDPOINT:
-		*(__u16 *)bufp = cpu_to_le16(0);
-		OK(2);
-
-	case RH_GET_STATUS | USB_TYPE_CLASS:
-		*(__u32 *)bufp = cpu_to_le32(0);
-		OK(4);
-
-	case RH_GET_STATUS | USB_RECIP_OTHER | USB_TYPE_CLASS:
-		*(__u32 *)bufp = cpu_to_le32(rh_status.wPortChange<<16 | rh_status.wPortStatus);
-		OK(4);
-
-	case RH_CLEAR_FEATURE | USB_RECIP_ENDPOINT:
-		switch (wValue) {
-		case 1:
-			OK(0);
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | USB_TYPE_CLASS:
-		switch (wValue) {
-		case C_HUB_LOCAL_POWER:
-			OK(0);
-
-		case C_HUB_OVER_CURRENT:
-			OK(0);
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
-		switch (wValue) {
-		case USB_PORT_FEAT_ENABLE:
-			rh_status.wPortStatus &= ~USB_PORT_STAT_ENABLE;
-			OK(0);
-
-		case USB_PORT_FEAT_SUSPEND:
-			rh_status.wPortStatus &= ~USB_PORT_STAT_SUSPEND;
-			OK(0);
-
-		case USB_PORT_FEAT_POWER:
-			rh_status.wPortStatus &= ~USB_PORT_STAT_POWER;
-			OK(0);
-
-		case USB_PORT_FEAT_C_CONNECTION:
-			rh_status.wPortChange &= ~USB_PORT_STAT_C_CONNECTION;
-			OK(0);
-
-		case USB_PORT_FEAT_C_ENABLE:
-			rh_status.wPortChange &= ~USB_PORT_STAT_C_ENABLE;
-			OK(0);
-
-		case USB_PORT_FEAT_C_SUSPEND:
-			rh_status.wPortChange &= ~USB_PORT_STAT_C_SUSPEND;
-			OK(0);
-
-		case USB_PORT_FEAT_C_OVER_CURRENT:
-			rh_status.wPortChange &= ~USB_PORT_STAT_C_OVERCURRENT;
-			OK(0);
-
-		case USB_PORT_FEAT_C_RESET:
-			rh_status.wPortChange &= ~USB_PORT_STAT_C_RESET;
-			OK(0);
-		}
-		break;
-
-	case RH_SET_FEATURE | USB_RECIP_OTHER | USB_TYPE_CLASS:
-		switch (wValue) {
-		case USB_PORT_FEAT_SUSPEND:
-			rh_status.wPortStatus |= USB_PORT_STAT_SUSPEND;
-			OK(0);
-
-		case USB_PORT_FEAT_RESET:
-			rh_status.wPortStatus |= USB_PORT_STAT_RESET;
-			rh_status.wPortChange = 0;
-			rh_status.wPortChange |= USB_PORT_STAT_C_RESET;
-			rh_status.wPortStatus &= ~USB_PORT_STAT_RESET;
-			rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
-			OK(0);
-
-		case USB_PORT_FEAT_POWER:
-			rh_status.wPortStatus |= USB_PORT_STAT_POWER;
-			OK(0);
-
-		case USB_PORT_FEAT_ENABLE:
-			rh_status.wPortStatus |= USB_PORT_STAT_ENABLE;
-			OK(0);
-		}
-		break;
-
-	case RH_SET_ADDRESS:
-		root_hub_devnum = wValue;
-		OK(0);
-
-	case RH_GET_DESCRIPTOR:
-		switch ((wValue & 0xff00) >> 8) {
-		case USB_DT_DEVICE:
-			len = sizeof(sl811_rh_dev_des);
-			bufp = sl811_rh_dev_des;
-			OK(len);
-
-		case USB_DT_CONFIG:
-			len = sizeof(sl811_rh_config_des);
-			bufp = sl811_rh_config_des;
-			OK(len);
-
-		case USB_DT_STRING:
-			len = usb_root_hub_string(wValue & 0xff, (int)(long)0,	"SL811HS", data, wLength);
-			if (len > 0) {
-				bufp = data;
-				OK(len);
-			}
-
-		default:
-			status = -32;
-		}
-		break;
-
-	case RH_GET_DESCRIPTOR | USB_TYPE_CLASS:
-		len = sizeof(sl811_rh_hub_des);
-		bufp = sl811_rh_hub_des;
-		OK(len);
-
-	case RH_GET_CONFIGURATION:
-		bufp[0] = 0x01;
-		OK(1);
-
-	case RH_SET_CONFIGURATION:
-		OK(0);
-
-	default:
-		PDEBUG(1, "unsupported root hub command\n");
-		status = -32;
-	}
-
-	len = min(len, buf_len);
-	if (data != bufp)
-		memcpy(data, bufp, len);
-
-	PDEBUG(5, "len = %d, status = %d\n", len, status);
-
-	usb_dev->status = status;
-	usb_dev->act_len = len;
-
-	return status == 0 ? len : status;
-}
diff --git a/drivers/usb/host/sl811.h b/drivers/usb/host/sl811.h
deleted file mode 100644
index c1f9f013bd1..00000000000
--- a/drivers/usb/host/sl811.h
+++ /dev/null
@@ -1,104 +0,0 @@
-#ifndef __UBOOT_SL811_H
-#define __UBOOT_SL811_H
-
-#undef SL811_DEBUG
-
-#ifdef SL811_DEBUG
-	#define PDEBUG(level, fmt, args...) \
-		if (debug >= (level)) printf("[%s:%d] " fmt, \
-		__PRETTY_FUNCTION__, __LINE__ , ## args)
-#else
-	#define PDEBUG(level, fmt, args...) do {} while(0)
-#endif
-
-/* Sl811 host control register */
-#define	SL811_CTRL_A		0x00
-#define	SL811_ADDR_A		0x01
-#define	SL811_LEN_A		0x02
-#define	SL811_STS_A		0x03	/* read	*/
-#define	SL811_PIDEP_A		0x03	/* write */
-#define	SL811_CNT_A		0x04	/* read	*/
-#define	SL811_DEV_A		0x04	/* write */
-#define	SL811_CTRL1		0x05
-#define	SL811_INTR		0x06
-#define	SL811_CTRL_B		0x08
-#define	SL811_ADDR_B		0x09
-#define	SL811_LEN_B		0x0A
-#define	SL811_STS_B		0x0B	/* read	*/
-#define	SL811_PIDEP_B		0x0B	/* write */
-#define	SL811_CNT_B		0x0C	/* read	*/
-#define	SL811_DEV_B		0x0C	/* write */
-#define	SL811_INTRSTS		0x0D	/* write clears	bitwise	*/
-#define	SL811_HWREV		0x0E	/* read	*/
-#define	SL811_SOFLOW		0x0E	/* write */
-#define	SL811_SOFCNTDIV		0x0F	/* read	*/
-#define	SL811_CTRL2		0x0F	/* write */
-
-/* USB control register bits (addr 0x00 and addr 0x08) */
-#define	SL811_USB_CTRL_ARM	0x01
-#define	SL811_USB_CTRL_ENABLE	0x02
-#define	SL811_USB_CTRL_DIR_OUT	0x04
-#define	SL811_USB_CTRL_ISO	0x10
-#define	SL811_USB_CTRL_SOF	0x20
-#define	SL811_USB_CTRL_TOGGLE_1	0x40
-#define	SL811_USB_CTRL_PREAMBLE	0x80
-
-/* USB status register bits (addr 0x03 and addr 0x0B) */
-#define	SL811_USB_STS_ACK	0x01
-#define	SL811_USB_STS_ERROR	0x02
-#define	SL811_USB_STS_TIMEOUT	0x04
-#define	SL811_USB_STS_TOGGLE_1	0x08
-#define	SL811_USB_STS_SETUP	0x10
-#define	SL811_USB_STS_OVERFLOW	0x20
-#define	SL811_USB_STS_NAK	0x40
-#define	SL811_USB_STS_STALL	0x80
-
-/* Control register 1 bits (addr 0x05) */
-#define	SL811_CTRL1_SOF		0x01
-#define	SL811_CTRL1_RESET	0x08
-#define	SL811_CTRL1_JKSTATE	0x10
-#define	SL811_CTRL1_SPEED_LOW	0x20
-#define	SL811_CTRL1_SUSPEND	0x40
-
-/* Interrut enable (addr 0x06) and interrupt status register bits (addr 0x0D) */
-#define	SL811_INTR_DONE_A	0x01
-#define	SL811_INTR_DONE_B	0x02
-#define	SL811_INTR_SOF		0x10
-#define	SL811_INTR_INSRMV	0x20
-#define	SL811_INTR_DETECT	0x40
-#define	SL811_INTR_NOTPRESENT	0x40
-#define	SL811_INTR_SPEED_FULL	0x80    /* only in status reg */
-
-/* HW rev and SOF lo register bits (addr 0x0E) */
-#define	SL811_HWR_HWREV		0xF0
-
-/* SOF counter and control reg 2 (addr 0x0F) */
-#define	SL811_CTL2_SOFHI	0x3F
-#define	SL811_CTL2_DSWAP	0x40
-#define	SL811_CTL2_HOST		0x80
-
-/* Set up for 1-ms SOF time. */
-#define SL811_12M_LOW		0xE0
-#define SL811_12M_HI		0x2E
-
-#define SL811_DATA_START	0x10
-#define SL811_DATA_LIMIT	240
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS           0x0080
-#define RH_CLEAR_FEATURE        0x0100
-#define RH_SET_FEATURE          0x0300
-#define RH_SET_ADDRESS		0x0500
-#define RH_GET_DESCRIPTOR	0x0680
-#define RH_SET_DESCRIPTOR       0x0700
-#define RH_GET_CONFIGURATION	0x0880
-#define RH_SET_CONFIGURATION	0x0900
-#define RH_GET_STATE            0x0280
-#define RH_GET_INTERFACE        0x0A80
-#define RH_SET_INTERFACE        0x0B00
-#define RH_SYNC_FRAME           0x0C80
-
-
-#define PIDEP(pid, ep) (((pid) & 0x0f) << 4 | (ep))
-
-#endif	/* __UBOOT_SL811_H */
diff --git a/drivers/usb/host/utmi-armada100.c b/drivers/usb/host/utmi-armada100.c
deleted file mode 100644
index 5d66e5881f3..00000000000
--- a/drivers/usb/host/utmi-armada100.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2012
- * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <contact@8051projects.net>
- *
- * (C) Copyright 2009
- * Marvell Semiconductor <www.marvell.com>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <usb.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/armada100.h>
-#include <asm/arch/utmi-armada100.h>
-#include <linux/delay.h>
-
-static int utmi_phy_init(void)
-{
-	struct armd1usb_phy_reg *phy_regs =
-		(struct armd1usb_phy_reg *)UTMI_PHY_BASE;
-	int timeout;
-
-	setbits_le32(&phy_regs->utmi_ctrl, INPKT_DELAY_SOF | PLL_PWR_UP);
-	udelay(1000);
-	setbits_le32(&phy_regs->utmi_ctrl, PHY_PWR_UP);
-
-	clrbits_le32(&phy_regs->utmi_pll, PLL_FBDIV_MASK | PLL_REFDIV_MASK);
-	setbits_le32(&phy_regs->utmi_pll, N_DIVIDER << PLL_FBDIV | M_DIVIDER);
-
-	setbits_le32(&phy_regs->utmi_tx, PHSEL_VAL << CK60_PHSEL);
-
-	/* Calibrate pll */
-	timeout = 10000;
-	while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
-		;
-	if (!timeout)
-		return -1;
-
-	udelay(200);
-	setbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
-	udelay(400);
-	clrbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
-
-	udelay(200);
-	setbits_le32(&phy_regs->utmi_tx, RCAL_START);
-	udelay(400);
-	clrbits_le32(&phy_regs->utmi_tx, RCAL_START);
-
-	timeout = 10000;
-	while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
-		;
-	if (!timeout)
-		return -1;
-
-	return 0;
-}
-
-/*
- * Initialize USB host controller's UTMI Physical interface
- */
-int utmi_init(void)
-{
-	struct armd1mpmu_registers *mpmu_regs =
-		(struct armd1mpmu_registers *)ARMD1_MPMU_BASE;
-
-	struct armd1apmu_registers *apmu_regs =
-		(struct armd1apmu_registers *)ARMD1_APMU_BASE;
-
-	/* Turn on 26Mhz ref clock for UTMI PLL */
-	setbits_le32(&mpmu_regs->acgr, APB2_26M_EN | AP_26M);
-
-	/* USB Clock reset */
-	writel(USB_SPH_AXICLK_EN, &apmu_regs->usbcrc);
-	writel(USB_SPH_AXICLK_EN | USB_SPH_AXI_RST, &apmu_regs->usbcrc);
-
-	/* Initialize UTMI transceiver */
-	return utmi_phy_init();
-}