diff options
Diffstat (limited to 'arch/arm/dts/imx6dl-sielaff.dts')
| -rw-r--r-- | arch/arm/dts/imx6dl-sielaff.dts | 533 |
1 files changed, 0 insertions, 533 deletions
diff --git a/arch/arm/dts/imx6dl-sielaff.dts b/arch/arm/dts/imx6dl-sielaff.dts deleted file mode 100644 index 7de8d5f2651..00000000000 --- a/arch/arm/dts/imx6dl-sielaff.dts +++ /dev/null @@ -1,533 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright (C) 2022 Kontron Electronics GmbH - */ - -/dts-v1/; - -#include "imx6dl.dtsi" -#include <dt-bindings/clock/imx6qdl-clock.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Sielaff i.MX6 Solo"; - compatible = "sielaff,imx6dl-board", "fsl,imx6dl"; - - chosen { - stdout-path = &uart2; - }; - - backlight: pwm-backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_backlight>; - pwms = <&pwm3 0 50000 0>; - brightness-levels = <0 0 64 88 112 136 184 232 255>; - default-brightness-level = <4>; - enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; - power-supply = <®_backlight>; - }; - - cec { - compatible = "cec-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hdmi_cec>; - cec-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>; - hdmi-phandle = <&hdmi>; - }; - - enet_ref: clock-enet-ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - clock-output-names = "enet-ref"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - key-0 { - gpios = <&gpio2 16 0>; - debounce-interval = <10>; - linux,code = <1>; - }; - - key-1 { - gpios = <&gpio3 27 0>; - debounce-interval = <10>; - linux,code = <2>; - }; - - key-2 { - gpios = <&gpio5 4 0>; - debounce-interval = <10>; - linux,code = <3>; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_leds>; - - led-debug { - label = "debug-led"; - gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "heartbeat"; - }; - }; - - memory@80000000 { - reg = <0x80000000 0x20000000>; - device_type = "memory"; - }; - - osc_eth_phy: clock-osc-eth-phy { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - clock-output-names = "osc-eth-phy"; - }; - - panel { - compatible = "lg,lb070wv8"; - backlight = <&backlight>; - power-supply = <®_3v3>; - - port { - panel_in_lvds: endpoint { - remote-endpoint = <&lvds_out>; - }; - }; - }; - - reg_3v3: regulator-3v3 { - compatible = "regulator-fixed"; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_backlight: regulator-backlight { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_backlight>; - enable-active-high; - gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>; - regulator-name = "backlight"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - reg_usb_otg_vbus: regulator-usb-otg-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reg_usbotg_vbus>; - enable-active-high; - gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&ecspi2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ecspi2>; - cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <20000000>; - }; -}; - -&fec { - /* - * Set PTP clock to external instead of internal reference, as the - * REF_CLK from the PHY is fed back into the i.MX6 and the GPR - * register needs to be set accordingly (see mach-imx6q.c). - */ - clocks = <&clks IMX6QDL_CLK_ENET>, - <&clks IMX6QDL_CLK_ENET>, - <&enet_ref>, - <&clks IMX6QDL_CLK_ENET_REF>; - clock-names = "ipg", "ahb", "ptp", "enet_out"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-connection-type = "rmii"; - phy-handle = <ðphy>; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - ethphy: ethernet-phy@1 { - reg = <1>; - clocks = <&osc_eth_phy>; - clock-names = "rmii-ref"; - micrel,led-mode = <1>; - reset-assert-us = <500>; - reset-deassert-us = <100>; - reset-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&gpio1 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "key-out", "key-in", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", ""; -}; - -&gpio2 { - gpio-line-names = - "", "", "", "", "", "", "", "", - "lan9500a-rst", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", ""; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c4>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock-frequency = <100000>; - status = "okay"; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clock-frequency = <100000>; - status = "okay"; - - touchscreen@55 { - compatible = "sitronix,st1633"; - reg = <0x55>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpio5>; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; - status = "disabled"; - }; - - touchscreen@5d { - compatible = "goodix,gt928"; - reg = <0x5d>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_touch>; - interrupts = <18 IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio5>; - irq-gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; - status = "disabled"; - }; -}; - -&i2c4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - clock-frequency = <100000>; - status = "okay"; -}; - -&ldb { - status = "okay"; - - lvds: lvds-channel@0 { - fsl,data-mapping = "spwg"; - fsl,data-width = <24>; - status = "okay"; - - port@4 { - reg = <4>; - - lvds_out: endpoint { - remote-endpoint = <&panel_in_lvds>; - }; - }; - }; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&usbh1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; - disable-over-current; - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - usb1@1 { - compatible = "usb4b4,6570"; - reg = <1>; - clocks = <&clks IMX6QDL_CLK_CKO>; - - assigned-clocks = <&clks IMX6QDL_CLK_CKO>, - <&clks IMX6QDL_CLK_CKO2_SEL>; - assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>, - <&clks IMX6QDL_CLK_OSC>; - assigned-clock-rates = <12000000 0>; - }; -}; - -&usbotg { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - dr_mode = "host"; - over-current-active-low; - vbus-supply = <®_usb_otg_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3v3>; - voltage-ranges = <3300 3300>; - no-1-8-v; - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; - status = "okay"; -}; - -&iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RD0__GPIO6_IO25 0x1b0b0 /* PMIC_IRQ */ - MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 - MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0 - MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 - MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 - >; - }; - - pinctrl_backlight: backlightgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b1 - >; - }; - - pinctrl_ecspi2: ecspi2grp { - fsl,pins = < - MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 - MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 - MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 - MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1 - >; - }; - - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 - MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 - MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 - MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 - MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 - MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 - >; - }; - - pinctrl_gpio_keys: gpiokeysgrp { - fsl,pins = < - MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b080 - MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x1b080 - MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b080 - >; - }; - - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0 - >; - }; - - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; - - pinctrl_hdmi_cec: hdmicecgrp { - fsl,pins = < - MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x1b8b1 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001f8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001f8b1 - >; - }; - - pinctrl_i2c4: i2c4grp { - fsl,pins = < - MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 - >; - }; - - pinctrl_reg_backlight: regbacklightgrp { - fsl,pins = < - MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b1 - >; - }; - - pinctrl_reg_usbotg_vbus: regusbotgvbusgrp { - fsl,pins = < - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1 - >; - }; - - pinctrl_touch: touchgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 - MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 - >; - }; - - pinctrl_usbh1: usbh1grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b1 - MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x1b0b0 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b1 - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x100b1 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 - >; - }; -}; |