diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/e850-96.h | 21 | ||||
| -rw-r--r-- | include/configs/ib62x0.h | 28 | ||||
| -rw-r--r-- | include/configs/imx93_evk.h | 2 | ||||
| -rw-r--r-- | include/configs/imx93_frdm.h | 30 | ||||
| -rw-r--r-- | include/configs/sama7d65_curiosity.h | 20 | ||||
| -rw-r--r-- | include/configs/socfpga_soc64_common.h | 24 | ||||
| -rw-r--r-- | include/configs/stm32mp23_common.h | 130 | ||||
| -rw-r--r-- | include/configs/stm32mp23_st_common.h | 51 | ||||
| -rw-r--r-- | include/configs/stm32mp25_st_common.h | 2 | ||||
| -rw-r--r-- | include/configs/sun55i.h | 11 |
10 files changed, 309 insertions, 10 deletions
diff --git a/include/configs/e850-96.h b/include/configs/e850-96.h index 4607b3089b2..63e85332bd8 100644 --- a/include/configs/e850-96.h +++ b/include/configs/e850-96.h @@ -9,4 +9,25 @@ #ifndef __E850_96_H #define __E850_96_H +/* GUIDs for capsule updatable firmware images */ +#define E850_96_FWBL1_IMAGE_GUID \ + EFI_GUID(0x181cd3f2, 0xe375, 0x44d2, 0x80, 0x78, \ + 0x32, 0x21, 0xe1, 0xdf, 0xb9, 0x5e) + +#define E850_96_EPBL_IMAGE_GUID \ + EFI_GUID(0x66c1a54d, 0xd149, 0x415d, 0xaa, 0xda, \ + 0xb8, 0xae, 0xe4, 0x99, 0xb3, 0x70) + +#define E850_96_BL2_IMAGE_GUID \ + EFI_GUID(0x89471c2a, 0x6c8d, 0x4158, 0xac, 0xad, \ + 0x23, 0xd3, 0xb2, 0x87, 0x3d, 0x35) + +#define E850_96_BOOTLOADER_IMAGE_GUID \ + EFI_GUID(0x629578c3, 0xffb3, 0x4a89, 0xac, 0x0c, \ + 0x61, 0x18, 0x40, 0x72, 0x77, 0x79) + +#define E850_96_EL3_MON_IMAGE_GUID \ + EFI_GUID(0xdf5718a2, 0x930a, 0x4916, 0xbb, 0x19, \ + 0x32, 0x13, 0x21, 0x4d, 0x84, 0x86) + #endif /* __E850_96_H */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index e1b62f78b21..01ab6edb05f 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -1,5 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* + * Copyright (C) 2025 Tony Dinh <mibodhi@gmail.com> * Copyright (C) 2011-2012 * Gerald Kerma <dreagle@doukki.net> * Luka Perkov <luka@openwrt.org> @@ -11,19 +12,34 @@ #include "mv-common.h" /* - * Environment variables configuration - */ - -/* - * Default environment variables + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros */ +#include "mv-common.h" -#define CFG_EXTRA_ENV_SETTINGS \ +#define EXTRA_ENV_SETTINGS_LEGACY \ "console=console=ttyS0,115200\0" \ "kernel=/boot/zImage\0" \ "fdt=/boot/ib62x0.dtb\0" \ "bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw\0" +#define KERNEL_ADDR_R __stringify(0x800000) +#define FDT_ADDR_R __stringify(0x2c00000) +#define RAMDISK_ADDR_R __stringify(0x01100000) +#define SCRIPT_ADDR_R __stringify(0x200000) + +#define LOAD_ADDRESS_ENV_SETTINGS \ + "kernel_addr_r=" KERNEL_ADDR_R "\0" \ + "fdt_addr_r=" FDT_ADDR_R "\0" \ + "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \ + "scriptaddr=" SCRIPT_ADDR_R "\0" + +#define CFG_EXTRA_ENV_SETTINGS \ + EXTRA_ENV_SETTINGS_LEGACY \ + LOAD_ADDRESS_ENV_SETTINGS \ + "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" + /* * SATA driver configuration */ diff --git a/include/configs/imx93_evk.h b/include/configs/imx93_evk.h index 94355cf61e4..e7db0161126 100644 --- a/include/configs/imx93_evk.h +++ b/include/configs/imx93_evk.h @@ -6,8 +6,6 @@ #ifndef __IMX93_EVK_H #define __IMX93_EVK_H -#include <linux/sizes.h> -#include <linux/stringify.h> #include <asm/arch/imx-regs.h> #define CFG_SYS_UBOOT_BASE \ diff --git a/include/configs/imx93_frdm.h b/include/configs/imx93_frdm.h new file mode 100644 index 00000000000..987fcacb999 --- /dev/null +++ b/include/configs/imx93_frdm.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2025 NXP + */ + +#ifndef __IMX93_FRDM_H +#define __IMX93_FRDM_H + +#include <asm/arch/imx-regs.h> + +#define CFG_SYS_UBOOT_BASE \ + (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512) + +#ifdef CONFIG_XPL_BUILD +#define CFG_MALLOC_F_ADDR 0x204D0000 +#endif + +/* Link Definitions */ + +#define CFG_SYS_INIT_RAM_ADDR 0x80000000 +#define CFG_SYS_INIT_RAM_SIZE 0x200000 + +#define CFG_SYS_SDRAM_BASE 0x80000000 +#define PHYS_SDRAM 0x80000000 +#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */ + +/* Using ULP WDOG for reset */ +#define WDOG_BASE_ADDR WDG3_BASE_ADDR + +#endif diff --git a/include/configs/sama7d65_curiosity.h b/include/configs/sama7d65_curiosity.h new file mode 100644 index 00000000000..9316b104ee3 --- /dev/null +++ b/include/configs/sama7d65_curiosity.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Configuration file for the SAMA7D65 Curiosity Board. + * + * Copyright (C) 2024 Microchip Technology Inc. and its subsidiaries + * + * Author: Ryan Wanner <ryan.wanner@microchip.com> + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CFG_SYS_AT91_SLOW_CLOCK 32768 +#define CFG_SYS_AT91_MAIN_CLOCK 24000000 /* from 24 MHz crystal */ +/* SDRAM */ +#define CFG_SYS_SDRAM_BASE 0x60000000 +#define CFG_SYS_SDRAM_SIZE 0x40000000 + +#endif diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 5ed17671f79..83b600c7fcc 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -73,9 +73,31 @@ #define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \ "qspi " +#if IS_ENABLED(CONFIG_CMD_NAND) +#define BOOT_TARGET_DEVICES_NAND(func) func(NAND, nand, na) +#else +#define BOOT_TARGET_DEVICES_NAND(func) +#endif + +#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ + "bootcmd_nand=ubi detach && " \ + "setenv mtdids 'nor0=nor0,nand0=nand.0' && " \ + "setenv mtdparts 'mtdparts=nor0:66m(qspi_uboot),190m(qspi_root);" \ + "nand.0:2m(u-boot),500m(root)' && " \ + "env select UBI; saveenv && " \ + "ubi part root && " \ + "ubi readvol ${scriptaddr} script && " \ + "echo NAND: Trying to boot script at ${scriptaddr} && " \ + "source ${scriptaddr}; " \ + "echo NAND: SCRIPT FAILED: continuing...; ubi detach;\0" + +#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ + "nand " + #define BOOT_TARGET_DEVICES(func) \ BOOT_TARGET_DEVICES_MMC(func) \ - BOOT_TARGET_DEVICES_QSPI(func) + BOOT_TARGET_DEVICES_QSPI(func) \ + BOOT_TARGET_DEVICES_NAND(func) #include <config_distro_bootcmd.h> diff --git a/include/configs/stm32mp23_common.h b/include/configs/stm32mp23_common.h new file mode 100644 index 00000000000..7285886b822 --- /dev/null +++ b/include/configs/stm32mp23_common.h @@ -0,0 +1,130 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */ +/* + * Copyright (C) 2025, STMicroelectronics - All Rights Reserved + * + * Configuration settings for the STM32MP23x CPU + */ + +#ifndef __CONFIG_STM32MP23_COMMMON_H +#define __CONFIG_STM32MP23_COMMMON_H +#include <linux/sizes.h> +#include <asm/arch/stm32.h> + +/* + * Configuration of the external SRAM memory used by U-Boot + */ +#define CFG_SYS_SDRAM_BASE STM32_DDR_BASE + +/* + * For booting Linux, use the first 256 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_SYS_BOOTMAPSZ SZ_256M + +#define STM32MP_FIP_IMAGE_GUID \ + EFI_GUID(0x19d5df83, 0x11b0, 0x457b, 0xbe, 0x2c, \ + 0x75, 0x59, 0xc1, 0x31, 0x42, 0xa5) + +/*****************************************************************************/ +#ifdef CONFIG_DISTRO_DEFAULTS +/*****************************************************************************/ + +#ifdef CONFIG_NET +#define BOOT_TARGET_PXE(func) func(PXE, pxe, na) +#else +#define BOOT_TARGET_PXE(func) +#endif + +#ifdef CONFIG_CMD_MMC +#define BOOT_TARGET_MMC0(func) func(MMC, mmc, 0) +#define BOOT_TARGET_MMC1(func) func(MMC, mmc, 1) +#define BOOT_TARGET_MMC2(func) func(MMC, mmc, 2) +#else +#define BOOT_TARGET_MMC0(func) +#define BOOT_TARGET_MMC1(func) +#define BOOT_TARGET_MMC2(func) +#endif + +#ifdef CONFIG_CMD_UBIFS +#define BOOT_TARGET_UBIFS(func) func(UBIFS, ubifs, 0, UBI, boot) +#else +#define BOOT_TARGET_UBIFS(func) +#endif + +#ifdef CONFIG_CMD_USB +#define BOOT_TARGET_USB(func) func(USB, usb, 0) +#else +#define BOOT_TARGET_USB(func) +#endif + +#define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_MMC1(func) \ + BOOT_TARGET_UBIFS(func) \ + BOOT_TARGET_MMC0(func) \ + BOOT_TARGET_MMC2(func) \ + BOOT_TARGET_USB(func) \ + BOOT_TARGET_PXE(func) + +/* + * default bootcmd for stm32mp23: + * for serial/usb: execute the stm32prog command + * for mmc boot (eMMC, SD card), distro boot on the same mmc device + * for NAND or SPI-NAND boot, distro boot with UBIFS on UBI partition + * for other boot, use the default distro order in ${boot_targets} + */ +#define STM32MP_BOOTCMD "bootcmd_stm32mp=" \ + "echo \"Boot over ${boot_device}${boot_instance}!\";" \ + "if test ${boot_device} = serial || test ${boot_device} = usb;" \ + "then stm32prog ${boot_device} ${boot_instance}; " \ + "else " \ + "run env_check;" \ + "if test ${boot_device} = mmc;" \ + "then env set boot_targets \"mmc${boot_instance}\"; fi;" \ + "if test ${boot_device} = nand ||" \ + " test ${boot_device} = spi-nand ;" \ + "then env set boot_targets ubifs0; fi;" \ + "run distro_bootcmd;" \ + "fi;\0" + +#ifndef STM32MP_BOARD_EXTRA_ENV +#define STM32MP_BOARD_EXTRA_ENV +#endif + +#define STM32MP_EXTRA \ + "env_check=if env info -p -d -q; then env save; fi\0" \ + "boot_net_usb_start=true\0" +/* + * memory layout for 96MB uncompressed/compressed kernel, + * 1M fdt, 1M script, 1M pxe and 1M for overlay + * and the ramdisk at the end. + */ +#define __KERNEL_COMP_ADDR_R __stringify(0x84000000) +#define __KERNEL_COMP_SIZE_R __stringify(0x04000000) +#define __KERNEL_ADDR_R __stringify(0x8a000000) +#define __FDT_ADDR_R __stringify(0x90000000) +#define __SCRIPT_ADDR_R __stringify(0x90100000) +#define __PXEFILE_ADDR_R __stringify(0x90200000) +#define __FDTOVERLAY_ADDR_R __stringify(0x90300000) +#define __RAMDISK_ADDR_R __stringify(0x90400000) + +#define STM32MP_MEM_LAYOUT \ + "kernel_addr_r=" __KERNEL_ADDR_R "\0" \ + "fdt_addr_r=" __FDT_ADDR_R "\0" \ + "scriptaddr=" __SCRIPT_ADDR_R "\0" \ + "pxefile_addr_r=" __PXEFILE_ADDR_R "\0" \ + "fdtoverlay_addr_r=" __FDTOVERLAY_ADDR_R "\0" \ + "ramdisk_addr_r=" __RAMDISK_ADDR_R "\0" \ + "kernel_comp_addr_r=" __KERNEL_COMP_ADDR_R "\0" \ + "kernel_comp_size=" __KERNEL_COMP_SIZE_R "\0" + +#include <config_distro_bootcmd.h> +#define CFG_EXTRA_ENV_SETTINGS \ + STM32MP_MEM_LAYOUT \ + STM32MP_BOOTCMD \ + BOOTENV \ + STM32MP_EXTRA \ + STM32MP_BOARD_EXTRA_ENV + +#endif + +#endif /* __CONFIG_STM32MP23_COMMMON_H */ diff --git a/include/configs/stm32mp23_st_common.h b/include/configs/stm32mp23_st_common.h new file mode 100644 index 00000000000..0c5c2fbef87 --- /dev/null +++ b/include/configs/stm32mp23_st_common.h @@ -0,0 +1,51 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause */ +/* + * Copyright (C) 2025, STMicroelectronics - All Rights Reserved + * + * Configuration settings for the STMicroelectonics STM32MP23x boards + */ + +#ifndef __CONFIG_STM32MP23_ST_COMMON_H__ +#define __CONFIG_STM32MP23_ST_COMMON_H__ + +#define STM32MP_BOARD_EXTRA_ENV \ + "usb_pgood_delay=2000\0" \ + "console=ttySTM0\0" + +#include <configs/stm32mp23_common.h> + +#ifdef CFG_EXTRA_ENV_SETTINGS +/* + * default bootcmd for stm32mp23 STMicroelectronics boards: + * for serial/usb: execute the stm32prog command + * for mmc boot (eMMC, SD card), distro boot on the same mmc device + * for nand or spi-nand boot, distro boot with ubifs on UBI partition or + * sdcard + * for nor boot, distro boot on SD card = mmc0 ONLY ! + */ +#define ST_STM32MP23_BOOTCMD "bootcmd_stm32mp=" \ + "echo \"Boot over ${boot_device}${boot_instance}!\";" \ + "if test ${boot_device} = serial || test ${boot_device} = usb;" \ + "then stm32prog ${boot_device} ${boot_instance}; " \ + "else " \ + "run env_check;" \ + "if test ${boot_device} = mmc;" \ + "then env set boot_targets \"mmc${boot_instance}\"; fi;" \ + "if test ${boot_device} = nand ||" \ + " test ${boot_device} = spi-nand ;" \ + "then env set boot_targets ubifs0 mmc0; fi;" \ + "if test ${boot_device} = nor;" \ + "then env set boot_targets mmc0; fi;" \ + "run distro_bootcmd;" \ + "fi;\0" + +#undef CFG_EXTRA_ENV_SETTINGS +#define CFG_EXTRA_ENV_SETTINGS \ + STM32MP_MEM_LAYOUT \ + ST_STM32MP23_BOOTCMD \ + BOOTENV \ + STM32MP_EXTRA \ + STM32MP_BOARD_EXTRA_ENV + +#endif +#endif diff --git a/include/configs/stm32mp25_st_common.h b/include/configs/stm32mp25_st_common.h index ab5a4a91644..cb679eb1be2 100644 --- a/include/configs/stm32mp25_st_common.h +++ b/include/configs/stm32mp25_st_common.h @@ -2,7 +2,7 @@ /* * Copyright (C) 2022, STMicroelectronics - All Rights Reserved * - * Configuration settings for the STMicroelectonics STM32MP25x boards + * Configuration settings for the STMicroelectronics STM32MP25x boards */ #ifndef __CONFIG_STM32MP25_ST_COMMON_H__ diff --git a/include/configs/sun55i.h b/include/configs/sun55i.h new file mode 100644 index 00000000000..70649366c1c --- /dev/null +++ b/include/configs/sun55i.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Placeholder wrapper to allow addressing Allwinner devices with Cortex-A55 + * cores separately. Please do not add anything in here. + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <configs/sunxi-common.h> + +#endif /* __CONFIG_H */ |