| Age | Commit message (Collapse) | Author |
|---|
|
This exported symbol has a very generic name. Rename it to indicate that
it relates to EFI and device-paths.
Fix checkpatch warnings related to use of multiple assignments.
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Include these function so they can be browsed in the API docs. Exclude
END since it causes a warning, which becomes an error:
./include/efi_device_path.h:22: warning: cannot understand function
prototype: 'const struct efi_device_path END; '
Signed-off-by: Simon Glass <sjg@chromium.org>
Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
These functions are useful for the EFI app. As a first step towards
making these available outside lib/efi_loader, create a separate header
file and include it where needed. Add proper comments to the functions,
since many are missing at present.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
|
|
Use lbaint_t for blknr to avoid overflow in ext4fs_read_file().
Background:
blknr (block number) used in ext4fs_read_file() could be increased to a
very large value and causes a wrap around at 32 bit signed integer max,
thus becomes negative. This results in an out-of-normal range for sector
number (during the assignment delayed_start = blknr) where delayed_start
sector is typed uint64 lbaint_t. This causes the "Read outside partition"
error.
This patch was tested on the Synology DS116 (Armada 385) board, and a
4TB Seagate HDD.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
|
|
Log the error if fs_devread() fails when trying to reading outside
partition. This will make bug reporting easier.
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
|
|
Add bloblist support to total_comput platform for passing data
from TF-A using the firmware handoff framework.
Signed-off-by: Jayanth Dodderi Chidanand <jayanthdodderi.chidanand@arm.com>
|
|
CRC16 is used in ext4_common.c. Build fails without it.
PS:
This is my first patch sent to a mailing list.
If there is anything wrong with it (email format, whitespace, etc.)
please let me know.
Signed-off-by: Marius Dinu <m95d+git@psihoexpert.ro>
|
|
1. As this is for MTD-based devices, the Kconfig dependency should be MTD
instead of only spi-nor flashes
2. Initialize saved_buf to avoid crash on free()
3. Remaining size should be set correctly to write_size
Fixes: 03fb08d4aef (env: Introduce support for MTD)
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Christian Marangi <ansuelsmth@gmail.com>
|
|
https://gitlab.denx.de/u-boot/custodians/u-boot-imx
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/26275
- Fix boot regression on imx8mn_bsh_smm_s2/s2pro.
- Fix reset on imx6ulz_smm_m2.
- Adjust DDR initialization on imx6ulz_smm_m2.
- Fix CAAM startup error.
|
|
In rare cases U-Boot returns an error message when intantiating the RNG
of the CAAM device:
“SEC0: RNG4 SH0 instantiation failed with error 0xffffffff”
This means, that even when the CAAM device reports a finished
descriptor, none is found in the output ring.
This might be caused by a missing cache invalidation before
reading the memory of the output ring
This patch moves the cache invalidation of the output ring from start of
the job to immediately after the notification from hardware where the
output ring will be read.
Signed-off-by: Olaf Baehring <olaf.baehring@draeger.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
|
|
CI: https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/26259
- Initial SPL support for T-Head TH1520 SoC
- Improve usability of TH1520 with mainline SPL
- Support building RV32 & RV64 images
- riscv: Improve jh7110 support
|
|
Pull request net-20250520.
CI: https://source.denx.de/u-boot/custodians/u-boot-net/-/pipelines/26247
net, net-lwip:
- Remove wget console output when called by EFI
net-lwip:
- Add 10 s timeout to TFTP
- Add LMB buffer checks
|
|
A small delay between DRAM read access with wrong parameters and
reconfiguration is necessary.
Without a delay between DRAM read access and a following reconfiguration
this reconfiguration fails for certain DRAM chips (Nanya).
Signed-off-by: Michael Bode <michael.bode@bshg.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
Calibration values were calculated using the NXP tool
I.MX6ULL_DDR3_Script_Aid_V0.01.xlsx
Signed-off-by: Michael Bode <michael.bode@bshg.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
Calibration values were calculated using the NXP tool
I.MX6ULL_DDR3_Script_Aid_V0.01.xlsx
Signed-off-by: Wolfgang Birkner <wolfgang.birkner@bshg.com>
Signed-off-by: Simon Holesch <simon.holesch@bshg.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
When using SPL on i.mx6 we frequently notice some DDR initialization
mismatches between the SPL code and the non-SPL code.
As the non-SPL code have been tested for long time and proves to be
reliable, let's configure the DDR in the exact same way as the non-SPL
case.
The idea is simple: just use the DCD table and write directly to the DDR
registers.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
Now that the UART driver can enable the required clocks, remove
the hard-coded clock enable.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
|
|
Now that the UART driver can enable the required clocks, remove
the hard-coded clock enable.
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
The commit dda454e933c6 ("serial: mxc: Support bulk enabling clocks")
breaks the booting of the BSH SMM S2 board. The analysis of the issue
revealed memory allocation failures during the registration of UART4
clocks as well as other peripherals. Increasing SYS_MALLOC_F_LEN to
0x10000 fixed the issue.
Dropping this option allows it to be set to the default value of
CONFIG_SYS_MALLOC_F_LEN, which is set by default to 0x10000 on
i.MX8M platforms.
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
|
|
Commit 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options") breaks
the boot of the BSH SMM S2 board. Add options to load U-Boot from raw NAND
sector.
Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
Commit 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options") breaks
the boot of the BSH SMM S2 board. As stated in the dropped comment, "Some
boards use this value even though MMC is not enabled in SPL, for example
imx8mn_bsh_smm_s2".
Support load of the U-Boot image from raw NAND sector.
Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
Commit 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options") breaks
the boot of the BSH SMM S2 board. As stated in the commit itself, "Some
boards use this value even though MMC is not enabled in SPL, for example
imx8mn_bsh_smm_s2".
Support load of the U-Boot image from raw NAND sector. This is equivalent
to load from MMC raw sector.
Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
|
|
Migrate to OF_UPSTREAM for phyCORE-i.MX93 since board can use upstream
Linux kernel device-tree for phyBOARD-Segin-i.MX93.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
|
|
commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()")
introduced a regression that 'reset' command unable to reset
imx6ulz based BSH module's modules in the u-boot.
BSH module's imx6, imx6ulz-bsh-smm-m2.dts
Fixes: 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()")
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
|
|
Add the configuration that allow to reset the board from reset
cmd
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
|
|
The node is specified on the parent architecture u-boot.dtsi
file
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
|
|
Standardize on using the IS_ENABLED macro.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
The function arch_spl_mmc_get_uboot_raw_sector() was never compiled,
even when the option CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION was
enabled. So rename the macro SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION to
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION.
Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
|
|
Describe the newly-supported clock controller of TH1520 in SoC
devicetree, replace dummy clocks with the controller-supplied ones and
add correct clocks for GPIO controllers.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
The clock driver is essential for TH1520 SoCs to operate. Select the
driver in SoC Kconfig entry.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
The driver is adapted from Linux kernel's version of clk-th1520-ap.c,
with only output clocks for external sensors, which are barely useful in
bootloaders, removed.
Same as the mainline driver, it currently lacks of ability to enable and
reconfigure PLLs, which could be implemented later.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
TH1520 SoC ships several IOPMPs protecting various on-chip peripherals.
They must be configured before accessing the peripherals. Let's
initialize them in SPL harts_early_init().
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Support for eMMC, SD card, GPIO and SPL have been available in LPi4A
port. Update the documentation of support status and build
instructions.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Adjust Kconfig and defconfig and add SPL initialization code for
Lichee Pi 4A. Then enable SPL support which we've added for TH1520 SoC
earlier. The board devicetree is changed to use TH1520 binman
configuration to generate bootable images.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Add binman configuration for TH1520 SoC, whose BROM loads the image
combined into SRAM and directly jumps to it. The configuration creates
u-boot-with-spl.bin where the SPL code locates at the start and the DDR
firmware is shipped.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Describe DRAM controller integrated in TH1520 SoC and preserve it in SPL
devicetree blob.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Memory node is necessary for TH1520 SPL to configure size and base
address of DRAM. Let's preserve it in SPL devicetree blob.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
SPL for TH1520 requires CPU and boot UART nodes to function. Preserve
them in SPL devicetree blob with bootph-pre-ram property.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
This patch cleans the vendor code of DDR initialization up, converts the
driver to fit in DM framework and use a firmware[1] packaged by binman to
ship PHY configuration.
Currently the driver is only capable of initializing the controller to
work with dual-rank 3733MHz LPDDR4, which is shipped by 16GiB variants
of LicheePi 4A boards and I could test with. Support for other
configurations could be easily added later.
Link: https://github.com/ziyao233/th1520-firmware # [1]
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Introduce the SoC-specific code and corresponding Kconfig entries for
TH1520 SoC. Following features are implemented for TH1520,
- Cache enable/disable through customized CSR
- Invalidation of customized PMP entries
- DRAM driver probing for SPL
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
The BROM of TH1520 always initializes UART0's parent clock and
configures the baudrate to 115200. Describe the clock frequency to make
UART function correctly in SPL without introducing CCF.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Designed before a standard set of cache management operations defined in
RISC-V, earlier T-Head cores like C906 and C910 provide CMO through the
customized extension XTheadCMO, which has been used in the CV1800B port
of U-Boot.
This patch splits XTheadCMO-related code into a generic module, allowing
SoCs shipping T-Head cores to share the code.
Link: https://github.com/XUANTIE-RV/thead-extension-spec
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
JH7110 drivers are missing support for CPU frequency scaling, so override
upstream device-tree to use default clock rates for syscrg. This override
duplicates a portion of jh7110-common-u-boot.dtsi file planned for removal.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Liang <ycliang@andestech.com>
|
|
- use upstream alias name for cpu and timer nodes
- remove bootph-pre-ram hint from parent nodes
- drop S7 cpu core "okay" status
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Move unnecessary clock frequency assignment out of device-tree and into the
board config header so that the ns16550 serial driver can successfully init
during SPL after failing to resolve the parent clock from upstream dts. The
serial driver will then resolve clock frequency from device-tree node parent
clock at init during Main app as it is expected by upstream.
Signed-off-by: E Shattow <e@freeshell.de>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Fix the erroneous header guard for insn-def.h to reflect the correct
header name.
Fixes: bfc8ca3f7f6 ("riscv: Add support for defining instructions")
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Similar to AArch64's case, Clang may wrongly fold accesses to gd pointer
which is defined with register qualifier into constants, breaking
various components.
This patch defines gd as a macro when building with Clang or LTO, which
expands to get_gd() that accesses gp pointer in assembly, making RISC-V
ports function properly and preparing for introduction of LTO in the
future. Board initialization code is also adapted for non-assignable gd.
Reported-by: Nathaniel Hourt <I@nathaniel.land>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Drop filename property for proper U-Boot entry since binman takes
"u-boot-nodtb.bin" as the default filename for u-boot-nodtb entries.
This follows efe9c12322b ("riscv: dts: binman.dtsi: Switch to
u-boot-nodtb entry for proper U-Boot") to clean binman.dtsi up.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
|
Unlike ARM and X86, booting 32-bit images on 64-bit CPUs is currently
not supported for Risc-V. Hence, for bootm, disallow booting a FIT
or a legacy image that was built for an arch type which is different
than the current arch and for booti, set the arch type to be the
same as the current arch.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
|
|
Select between the 32-bit or 64-bit arch type for the image headers
depending on how the build is configured.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
|
