summaryrefslogtreecommitdiff
path: root/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
AgeCommit message (Collapse)Author
2025-10-09arm64: zynqmp: Remove undocumented arasan, has-mdma propertyMichal Simek
Property was used long ago by internal Xilinx Linux driver but it is not documented in DT binding that's why remove it. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/546788df1a64c41e332463411ad99b1f3b40bc96.1756803198.git.michal.simek@amd.com
2024-01-09arm64: zynqmp: Rename i2c?-gpio to i2c?-gpio-grpMichal Simek
Anything ending with gpio/gpios is taken as gpio phande/description which is reported as the issue coming from gpio-consumer.yaml schema. That's why rename the gpio suffix to gpio-grp to avoid name collision. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/407b0b67ba019be5a2073d09d578b381c639cbc6.1703002605.git.michal.simek@amd.com
2023-11-07arm64: dts: zynqmp: make hw-ecc as the default ecc modeAmit Kumar Mahapatra
Except for Linux no other component (i.e., u-boot, fsbl or BootRom) of the software stack supports software ecc engine. So, make hw-ecc as the default ecc mode. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f47b95616eb40d3a9908ca60df94ec6e873b071c.1697119098.git.michal.simek@amd.com
2023-10-09arm64: zynqmp: Sync licenses with Linux kernelMichal Simek
There is difference between licenses in the Linux kernel and there shouldn't be any diff because all changes are coming from the same source at the same time. The difference is really in a time when they were upstreamed. That's why sync it up. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/813b29378083153b67c60772f28cd2613519f338.1695378830.git.michal.simek@amd.com
2023-10-09arm64: xilinx: Put ethernet phys to mdio nodeMichal Simek
All zynqmp boards have been already described via mdio node that's why also convert the rest of the boards. With using mdio node there is an option to add reset property for the whole mdio bus which is reflected by 's/phy-reset-gpios/reset-gpios/g' for some boards. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/ff165281a70a38e2b76fee91e6255ce95ce8021b.1695378830.git.michal.simek@amd.com
2023-07-21xilinx: dts: Fix open drain warning on Zynq, ZynqMP and VersalManikanta Guntupalli
Fix for below open drain warning on Zynq, ZynqMP and Versal reported by Linux. "enforced open drain please flag it properly in DT/ACPI DSDT/board file." Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/056b6f60f89fa2addb762669b80640cd5b31b001.1688992653.git.michal.simek@amd.com
2023-07-21arm64: zynqmp: Switch to amd.com emailsMichal Simek
Update my and DPs email address to match current setup. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/aba5b19b9c5a95608829e86ad5cc4671c940f1bb.1688992543.git.michal.simek@amd.com
2023-03-09arm64: dts: zynqmp: Enable nand-on-flash-bbt in DT by defaultAshok Reddy Soma
By default enable nand-on-flash-bbt DT flag, so that driver always refers to the bad block table(bbt) present on the flash device. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20230224050709.30014-5-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2022-06-24arm64: zynqmp: Fix usb node drive strength and slew rateAshok Reddy Soma
As per design, all input/rx pins should have fast slew rate and 12mA drive strength. Rest all pins should be slow slew rate and 4mA drive strength. Fix usb nodes as per this and remove setting of slow slew rate for all the usb gorup pins. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/b245c165f05845c1f3ab41a92c82b7ec1538cee4.1655288171.git.michal.simek@amd.com
2021-09-30arm64: zynqmp: Add device tree properties for nand flashAmit Kumar Mahapatra
Add ecc strength & ecc step size properties for nand flash devices, when operating in software-ecc mode. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/866f4b888129ff0213df9cdb51b5529b199fb7b7.1631713594.git.michal.simek@xilinx.com
2021-07-26arm64: dts: zynqmp: Enable USB2.0 for zc1751-xm016-dc2Piyush Mehta
The board zynqmp-zc1751-xm016-dc2 support only USB2.0. This patch removes USB3.0 DT configuration for DC2 board. Signed-off-by: Piyush Mehta <piyush.mehta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Remove gpio from aliases listMichal Simek
It is not recommended to have aliases for gpio. In past it was used in Linux for assigning numbers via sysfs which is deprecated and libgpiod should be used instead. In U-Boot this number is used for seq number but gpio offset are not counted from this number. That's why having these aliases only for seq number is not needed. As is done in Linux it is the best to use full gpio name instead of sequence number which depends on sequence in binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Enable USB3.0 for dc2/dc3Michal Simek
Both boards are usb3.0 capable. dc3 was also missing enabling dwc3* nodes. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Remove can aliases from zc1751Michal Simek
Networking subsystem is not using aliases that's why remove them for CAN devices. There is also no any other Xilinx ZynqMP DT file with them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-06-23arm64: zynqmp: Update Copyright years to 2021Michal Simek
Trivial change for all files I have touched recently. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-05-19arm64: zynqmp: Add pinctrl descriptionMichal Simek
ZynqMP pinctrl Linux driver has been merged to 5.13-rc1 kernel. Based on it DT files can be extended by pinctrl configurations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-03-30arm64: zynqmp: Update device tree properties for nand flashAmit Kumar Mahapatra
Update the following device tree properties for nand flash - Set software ecc mode. - Set bch as ecc algo. - Set read block to 0. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Do not duplicate flash partition label propertyAmit Kumar Mahapatra
In kernel 5.4, support has been added for reading MTD devices via the nvmem API. For this the mtd devices are registered as read-only NVMEM providers under sysfs with the same name as the flash partition label property. So if flash partition label property of multiple flash devices are identical then the second mtd device fails to get registered as a NVMEM provider. This patch fixes the issue by having different label property for different flashes. Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-04-06arm64: zynqmp: Update Copyright years to 2020Michal Simek
Trivial change. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Update nand device tree node propertiesNaga Sureshkumar Relli
This patch updates the nand device tree node properties as per updated driver. Signed-off-by: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: dt: Add missing DP83867 quirkHarini Katakam
The DP83867 strap control workaround is already present in Linux kernel mainline binding. All these Xilinx boards require this quirk. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-10-24arm64: zynqmp: Use ethernet-phy as node name for ethernet physMichal Simek
Ethernet phys based on devicetree specification should be using ethernet-phy@ node name instead of pure phy@. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Fix spi flash partition definition for zc1751 dc2Michal Simek
Using different node name and label partitions as data. Also use latest compatible strings based on mainline review. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Remove additional comments from dts filesMichal Simek
Remove additional comments which were removed as the part of upstreaming. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09arm64: zynqmp: Sync up license with mainline kernelMichal Simek
Mainline Linux kernel has adopted SPDX header license in a different format then was used before. This patch is syncing it up. Also update years in License text and remove Nathalie's email because it is no longer valid. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-23arm64: zynqmp: Convert board to use zynqmp-clk driverMichal Simek
Use zynqmp clock driver instead of fixed clocks. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-12-14arm64: zynqmp: Remove undocumented dma propertiesMichal Simek
Remove overfetch, ratectrl, include-sg and src-issue dma properties. Driver is not using them and they are also not documented in the binding doc. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Kedareswara rao Appana <appanad@xilinx.com>
2017-11-28arm64: zynqmp: Remove local-mac-address from dtsi fileMichal Simek
Generic dtsi file can't use the same mac address for all. U-Boot read mac from eeprom in zcu102 case and for others random mac address is generated. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28arm64: zynqmp: Remove leading 0s from mtd table for spi flashesMichal Simek
dtc reports issues with it. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dtb: Warning (unit_address_format): Node /amba/spi@ff040000/spi0_flash0@0/spi0_flash0@00000000 unit name should not have leading 0s arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dtb: Warning (unit_address_format): Node /amba/spi@ff050000/spi1_flash0@0/spi1_flash0@00000000 unit name should not have leading 0s arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (unit_address_format): Node /amba/spi@ff040000/spi0_flash0@0/spi0_flash0@00000000 unit name should not have leading 0s arch/arm64/boot/dts/xilinx/zynqmp-ep108.dtb: Warning (unit_address_format): Node /amba/spi@ff050000/spi1_flash0@0/spi1_flash0@00000000 unit name should not have leading 0s Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10ARM64: zynqmp: Fix usb nodes for dc1 and dc2Michal Simek
Fix DT binding for usb nodes. Setup correct aliases and enable dwc3 nodes. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM64: zynqmp: Remove DTC 1.4.2 warningsMichal Simek
DTC 1.4.2 reports these warnings: Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /amba has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /amba/usb@fe200000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/usb@fe300000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-video0channel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-video1channel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-video2channel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-graphicschannel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-audio0channel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /amba/dma@fd4c0000/dma-audio1channel@fd4c0000 has a unit name, but no reg property Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name This patch is fixing them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add support for zc1751 with DC cardsMichal Simek
Support ZynqMP zc1751 with DC cards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-13 16:58:42 +0000