| Age | Commit message (Collapse) | Author |
|---|
|
This symbol is not something that the user should be enabling or
disabling but rather the developer for a particular board should select
it when required.
This is mostly size neutral, however a few places do have changes. In
the case of i.MX6ULL systems, it is always the case that
arch_misc_init() could call setup_serial_number() and do useful work,
but was not enabled widely, but now is. In the case of i.MX23/28
systems, we should be able to call mx28_fixup_vt() again here, so do so.
Finally, some platforms were calling arch_misc_init() and then not doing
anything and this results in removing the option.
Acked-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
E Shattow <e@freeshell.de> says:
Make consistent use of lowercase hexadecimal prefix '0x' throughout U-Boot.
There are a few remaining uses of uppercase 'X' to denote hexadecimal prefix
or placeholder in documentation and error messages.
External devicetree-rebasing dts/upstream and the generated code of
xilinx/zynq are ignored for the series.
Link: https://lore.kernel.org/r/20250606224558.1117422-1-e@freeshell.de
|
|
Use consistent lowercase hex prefix style in arch/*
Signed-off-by: E Shattow <e@freeshell.de>
|
|
This function is currently a misnomer at times as we have cases where it
passes arguments to the image. In preparation for making that be a more
common case rename this function to jump_to_image(...). In order to do
this, rename jump_to_image in board_init_r(...) to jumper so that we do
not have a conflict.
Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Reword the commit message, adding missing cases of
jump_to_image_no_args()]
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Some drivers call video_set_flush_dcache() to indicate that they want to
have the dcache flushed for the frame buffer. These drivers benefit from
our new video damage control, because we can reduce the amount of memory
that gets flushed significantly.
This patch enables video damage control for all device drivers that call
video_set_flush_dcache() to make sure they benefit from it.
Signed-off-by: Alexander Graf <agraf@csgraf.de>
[Alper: Add to VIDEO_TIDSS, imply instead of select]
Co-developed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
Tom Rini <trini@konsulko.com> says:
This series switches to always using $(PHASE_) in Makefiles when
building rather than $(PHASE_) or $(XPL_). It also starts on documenting
this part of the build, but as a follow-up we need to rename
doc/develop/spl.rst and expand on explaining things a bit.
Link: https://lore.kernel.org/r/20250401225851.1125678-1-trini@konsulko.com
|
|
It is confusing to have both "$(PHASE_)" and "$(XPL_)" be used in our
Makefiles as part of the macros to determine when to do something in our
Makefiles based on what phase of the build we are in. For consistency,
bring this down to a single macro and use "$(PHASE_)" only.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The option ONENAND_BOOT is never set, so remove it. The option
SYS_ONENAND_BOOT was never migrated to Kconfig and any platforms which
supported that have long been removed from the code, so remove the
reference there as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
At this point in time, DM is always enabled. So if MMC is enabled, it
should select DM_MMC. No drivers need to depend on DM_MMC being enabled
now, so remove that from dependency lists. This now means that a number
of platforms which select'd DM_MMC need to select MMC instead. This also
fixes a migration problem with espresso7420 in that MMC is built again
with the platform.
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
|
|
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Use XPL_ as the symbol to indicate an SPL build. This means that SPL_ is
no-longer set.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
This is a better name for this function, so update it.
Tidy up the function comment to mention VPL.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
emac.c implements cpu_eth_init() so it needs to pull the corresponding
header file.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
The am33xx_spl_board_init function was introduced as a way to add
board-specific SPL init for AM33xx devices since the spl_board_init
function was already used for SoC-specific init.
Now that the SoC-specific SPL init was moved to spl_soc_init, we can
use spl_board_init for this purpose and get rid of
am33xx_spl_board_init.
Rename the function in board files and enable the related config
option for concerned boards.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Both spl_board_init and spl_soc_init are available as ways to run
specific code in the SPL's board_init_r. Use the former for init
code that is specific to the SoC and leave spl_board_init available
for boards to use.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
This board has not been converted to CONFIG_DM_I2C by the deadline.
Remove it.
Acked-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
There are no longer any OMAP4 platforms in U-Boot, remove the related
functionality.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This board has not been converted to CONFIG_DM_I2C by the deadline.
Remove it.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This board has not been converted to CONFIG_DM_I2C by the deadline.
Remove it.
Acked-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Drop all duplicate newlines. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
|
|
Since commit 0dba45864b2a ("arm: Init the debug UART") the debug UART is
set up in _main() before early_system_init() is called.
Add a suitable board_debug_uart_init() function to set up the UART in
SPL.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
commit 6e2228fb052b ("Merge patch series "Clean up arm linker scripts")
was cleaning up linker scripts for armv7 and v8 but was leaving
_end and __secure_stack_start/end.
commit d0b5d9da5de2 ("arm: make _end compiler-generated")
was moving _end to be compiler generated. _end is defined as c variable
in its own section to force the compiler emit relative a reference.
However, defining those in the linker script will do the same thing
since [0].
So let's remove the special sections from the linker scripts, the
variable definitions from sections.c and define them as a symbols.
It's worth noting that _image_binary_end symbol is now redundant and
can be removed in the future.
- SPL
The .end section has been removed from the new binary
[ 5] .end
PROGBITS 00000000fffdf488 000000000002f488 0
0000000000000000 0000000000000000 0 1
[0000000000000003]: WRITE, ALLOC
$~ bloat-o-meter kria_old/spl/u-boot-spl krina_new/spl/u-boot-spl
add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0 (0)
Function old new delta
Total: Before=115980, After=115980, chg +0.00%
$~ readelf -sW kria_old/u-boot kria_new/u-boot | grep -w _end
12047: 000000000813a0f0 0 OBJECT GLOBAL DEFAULT 11 _end
12047: 000000000813a118 0 NOTYPE GLOBAL DEFAULT 11 _end
$~ readelf -sW kria_old/spl/u-boot-spl kria_new/spl/u-boot-spl | grep -w _end
1605: 00000000fffdf488 0 OBJECT GLOBAL DEFAULT 5 _end
1603: 00000000fffdf498 0 NOTYPE GLOBAL DEFAULT 4 _end
$~ readelf -sW old/u-boot new/u-boot | grep -w _end
8847: 0000000000103710 0 OBJECT GLOBAL DEFAULT 11 _end
8847: 0000000000103738 0 NOTYPE GLOBAL DEFAULT 11 _end
$~ readelf -sW old_v7/u-boot new_v7/u-boot | grep -w _end
10638: 000da824 0 OBJECT GLOBAL DEFAULT 10 _end
10637: 000da84c 0 NOTYPE GLOBAL DEFAULT 10 _end
- For both QEMU instances
$~ bloat-o-meter old/u-boot new/u-boot
add/remove: 0/0 grow/shrink: 1/0 up/down: 20/0 (20)
Function old new delta
version_string 50 70 +20
Total: Before=656915, After=656935, chg +0.00%
[0] binutils commit 6b3b0ab89663 ("Make linker assigned symbol dynamic only for shared object")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
|
|
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This follows the example of RISC-V where <asm/global_data.h> includes
<asm/u-boot.h> directly as "gd" includes a reference to bd_info already
and so the first must include the second anyhow. We then remove
<asm/u-boot.h> from all of the places which include references to "gd"
an so have <asm/global_data.h> already.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Remove <common.h> from all mach-omap2 files and when needed add
missing include files directly.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
load_firmware() API calls fs-loader APIs and checks for CONFIG_FS_LOADER
before calling those APIs. The if check only checks for CONFIG_FS_LOADER
but not for CONFIG_SPL_FS_LOADER.
When CONFIG_FS_LOADER is enabled, load_firmware() API calls fs-loader APIs
but this is done at SPL stage and at this time FS_LOADER is not built yet
as a result we see below build error.
AR spl/boot/built-in.o
LD spl/u-boot-spl
arm-none-linux-gnueabihf-ld.bfd: arch/arm/mach-k3/common.o: in function
`load_firmware':
/home/danish/workspace/u-boot/arch/arm/mach-k3/common.c:184: undefined
reference to `get_fs_loader'
arm-none-linux-gnueabihf-ld.bfd:
/home/danish/workspace/u-boot/arch/arm/mach-k3/common.c:185: undefined
reference to `request_firmware_into_buf'
make[2]: *** [/home/danish/workspace/u-boot/scripts/Makefile.spl:527:
spl/u-boot-spl] Error 1
make[1]: *** [/home/danish/workspace/u-boot/Makefile:2055:
spl/u-boot-spl] Error 2
make[1]: Leaving directory '/home/danish/uboot_images/am64x/r5'
make: *** [Makefile:177: sub-make] Error 2
Fix this by modifying the if check to CONFIG_IS_ENABLED(FS_LOADER) instead
of IS_ENABLED(CONFIG_FS_LOADER) as the former will check for the
appropriate config option (CONFIG_SPL_FS_LOADER / CONFIG_FS_LOADER) based
on the build stage.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
|
|
property as fallback (kernel 5.19+)
Clock names has been updated in kernel 5.19+ with the removal of
non-standard node names [1]. Due to this change, ft_opp_clock_fixups()
doesn't work anymore since ft_fixup_clocks() is looking to the clock
name and ft_opp_clock_fixups() error out with the following message:
ft_fixup_clocks failed for DSP voltage domain: <valid offset/length>
We can't use the new clock name since several clock are using the same
generic name "clock". ft_opp_clock_fixups() is looking at the clocks
node in cm_core_aon@0:
/sys/firmware/devicetree/base/ocp/interconnect@4a000000/segment@0/target-module@5000/cm_core_aon@0/clocks
...
clock@120
clock@160
clock@1a0
clock@1e0
clock@210
clock@234
clock@284
clock@2a8
clock@2d8
When fdt_subnode_offset() fail, we can look at clock-output-names
property as fallback since it contain the previous clock name.
libfdt doesn't provide any support to replace fdt_subnode_offset() by
a new function looking for clock-output-names property instead of the
node name. So we have to implement it in arch/arm/mach-omap2/omap5/fdt.c
for now.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=e4920169e7a2a839836d3a0d8cda1bae8caa3056
Cc: Suman Anna <s-anna@ti.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Romain Naour <romain.naour@skf.com>
|
|
The help for CONFIG_MTD explains that it needs to be enabled for various
things like NAND, etc to be available. It however then doesn't enforce
this dependency and so if you have none of these systems present you
still need to disable a number of options. Fix this by making places
that select/imply one type of flash, but did not do the same, also do
this for "MTD". Make boards which hadn't been enabling MTD already but
need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it
wasn't previously enabled but was now being implied.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This specific bit logic is used to determine what NAND chip is present
on a board in order to then know what revision of the board we have and
so what DDR chips are present. We can only do this if we have a NAND
chip, and so we will have NAND_OMAP_GPMC enabled.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Maxim Uvarov <maxim.uvarov@linaro.org> says:
Add small net fixes prior lwip patches.
|
|
Use device specific naming for functions so as to not overlap
with common function names.
Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
|
|
Draco is a family of 3 boards: thuban, rastaban & etamin. Rename all
targets of the family adding the draco- prefix to increase readibility
and simplify future commits about concerning all boards of the family.
The name draco was initially used for the first target. It's deprecated
since a 2nd target was introduced. Unfortunately the draco target was
copied to the thuban target instead to be renamed. Remove it to save
unnecessary maintenance effort.
Signed-off-by: Enrico Leto <enrico.leto@siemens.com>
|
|
Move the omap3 beagle to the beagle vendor folder representing
BeagleBoard.org platforms.
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Prepare v2024.01-rc3
|
|
Replace instances of http://www.ti.com with https://www.ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The migration deadline for moving to DM_SCSI was v2023.04. A further
reminder was sent out in August 2023 to the remaining platforms that had
not migrated already, and that a few more over the line (or configs
deleted).
With this commit we:
- Rename CONFIG_DM_SCSI to CONFIG_SCSI.
- Remove all of the non-DM SCSI code. This includes removing other
legacy symbols and code and removes some legacy non-DM AHCI code.
- Some platforms that had previously been DM_SCSI=y && SCSI=n are now
fully migrated to DM_SCSI as a few corner cases in the code assumed
DM_SCSI=y meant SCSI=y.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Commit 65cc0e2a65d2 ("global: Move remaining CONFIG_SYS_* to CFG_SYS_*")
renamed CONFIG_SYS_UBOOT_START to CFG_SYS_UBOOT_START. Unfortunately,
this meant that the value was no longer available to the Makefile. This
caused imxrt to fail to boot. All the other boards that used this
variable were unaffected because they were using the default value
which is CONFIG_TEXT_BASE.
This commit converts CFG_SYS_UBOOT_START to Kconfig and sets the default
value to CONFIG_TEXT_BASE.
Suggested-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Suggested-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h
Move this out of the common header and include it only where needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
In 2cb43ef1c223 ("usb: ether: Fix error handling in usb_ether_init") the error
handling of usb_ether_init() was changed. Not a single other call site of this
function checks its return value, therefore follow suit in the am33xx code.
Do not cause the boot to halt if the usb gadget ethernet initialization fails:
initcall sequence 9ffdbd84 failed at call 808024b9 (err=-19)
### ERROR ### Please RESET the board ###
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Michal Suchánek <msuchanek@suse.de>
|
|
This platform is behind on migrations (it is the sole user of the oldest
legacy version of the USB gadget stack and is long overdue for
migration) and with Pali no longer being a maintainer, we remove this
platform.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Very few of the existing event-spy records use the arguments they are
passed. Update them to use a simple spy instead, to simplify the code.
Where an adaptor function is currently used, remove it where possible.
Signed-off-by: Simon Glass <sjg@chromium.org>
|
|
Since commit 56670d6fb83f ("disk: part: use common api to lookup part
driver") part_get_info_by_name_type() ignores the part_type parameter
used to restrict the partition table type.
omap_mmc_get_part_size() and part_get_info_by_name() are the only
consumers.
omap_mmc_get_part_size() calls with part_type = PART_TYPE_EFI because at
the time of implementation a speed up could be gained by passing the
partition table type. After 5 years experience without this restriction
it looks safe to keep it that way.
part_get_info_by_name() uses PART_TYPE_ALL.
Move the logic of part_get_info_by_name_type() to part_get_info_by_name()
and replace the function in omap_mmc_get_part_size().
Fixes: 56670d6fb83f ("disk: part: use common api to lookup part driver")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
The function declaration for force_emif_self_refresh takes no parameters
but does not specify this, only the prototype in the headers do. As
clang will warn about this, correct it.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
This platform is currently unmaintained and untested, so remove it.
Further, as it is the only TI816X SoC example, remove related files as
well.
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
The original function was only called once, before relocation. The new
one is called again after relocation. This was not the intent of the
original call. Fix this by renaming and updating the calling logic.
With this, chromebook_link64 makes it through SPL.
Fixes: 7fe32b3442f0 ("event: Convert arch_cpu_init_dm() to use events")
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
|
