summaryrefslogtreecommitdiff
path: root/drivers/ddr/imx
AgeCommit message (Collapse)Author
2024-12-23imx: Use per board ddrphy_trained_csrPeng Fan
Drop global ddrphy_trained_csr which maybe different with per board ddrphy_trained_csr. DDR TOOL generates ddrphy_trained_csr for each board, using the global ddrphy_trained_csr has risk that values may be not up to date. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2024-12-07ddr: imx: Add new rates for i.MX91Ye Li
iMX91 reuses iMX93 controller and PHY, but with lower speed, so add new DDR rates for i.MX91. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2024-10-25imx: Support i.MX93 9X9 QSB boardPeng Fan
Add i.MX93 9x9 Quick Start Board support. - Two ddr scripts included w/o inline ecc feature. - SDHC/NETWORK/I2C/UART supported - PCA9450 supported, default over drive mode - Documentation added. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2024-10-11drivers: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILDSimon Glass
Use the new symbol to refer to any 'SPL' build, including TPL and VPL Signed-off-by: Simon Glass <sjg@chromium.org>
2024-09-19imx9: Add 233Mhz DDR PLL frequencyYe Li
To support 1.866GTS LPDDR4x timing script, need to add 233Mhz freq to DDR PLL for second mission point at 933MTS. Otherwise DDR training will fail. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2024-07-22drivers: ddr: Remove duplicate newlinesMarek Vasut
Drop all duplicate newlines. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2024-05-20Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"Tom Rini
As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07ddr: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-04-22Kconfig: Remove trailing whitespace in its promptMichal Simek
All errors are generated by ./tools/qconfig.py -b -j8 -i whatever. Error look like this: warning: SPL_CLK_CCF (defined at drivers/clk/Kconfig:59) has leading or trailing whitespace in its prompt Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-12-18Merge tag 'v2024.01-rc5' into nextTom Rini
Prepare v2024.01-rc5
2023-12-14ddr: imx: Add 3600 MTps rate supportMarek Vasut
Add PLL settings for DDR 3600 MTps . This is very similar to 3200 MTps PLL setting, except the divider is not 9 but 8 . Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2023-12-14ddr: imx: Handle 3734 in addition to 3733 and 3732 MTps ratesMarek Vasut
The new MX8M DDR tool 3.31 now generates a programming file which uses data rate 3734 instead of 3733 or 3732 . Handle another rounding option . Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2023-12-13ddr: imx: Save the FW loading if it hasn't changedShawn Guo
Function ddr_load_train_firmware() is called 4 times in a loop by ddr_cfg_phy(). The first 3 calls are all '1D' type and just loading the same FWs. Let's add a type check and save 2 of them. This helps to reduce DDRPHY training time from 269 ms down to 212 ms, and thus speed up boot time ~ 50 ms. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Fabio Estevam <festevam@denx.de>
2023-08-09treewide: unify the linker symbol reference formatShiji Yang
Now all linker symbols are declared as type char[]. Though we can reference the address via both the array name 'var' and its address '&var'. It's better to unify them to avoid confusing developers. This patch converts all '&var' linker symbol refrences to the most commonly used format 'var'. Signed-off-by: Shiji Yang <yangshiji66@outlook.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2023-05-21ddr: imx9: update the rank setting for multi fsp supportJacky Bai
The rank setting flow should be updated to support multi fsp config. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21ddr: imx93: update the ddr init to support mult setpointsJacky Bai
Update the DDR init flow for multi-setpoint support on i.MX93. A new fsp_cfg struct need to be added in the timing file to store the diff part of the DDRC and DRAM MR register for each setpoint. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21ddr: imx93: Add 625M bypass clock supportJacky Bai
Add 625M bypass clock that may be used DRAM 625M bypass mode support. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21ddr: imx9: Change the saved ddr data base to 0x2051c000Jacky Bai
change the ddr saved info to the last 16KB of the OCRAM. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21ddr: imx9: Add workaround for DDRPHY rank-to-rank errataYe Li
According to DDRPHY errata, the Rank-to-Rank Spacing and tphy_rdcsgap specification does not include the Critical Delay Difference (CDD) to properly define the required rank-to-rank read command spacing after executing PHY training firmware. Following the errata workaround, at the end of data training, we get all CDD values through the MessageBlock, then re-configure the DDRC timing of WWT/WRT/RRT/RWT with comparing MAX CDD values. Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com>
2023-03-29ddr: imx: Update the ddr init flow on imx8ulpJacky Bai
Update the ddr init flow to support LPDDR3 and PLL bypass mode. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2023-03-29ddr: imx8ulp: Change DRAM timing save area to 0x20055000Ye Li
To align with ARM trusted firmware's change, adjust DRAM timing save area to new position 0x20055000. So we can release the space since 0x2006c000 for the NOBITS region of ARM trusted firmware Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com>
2023-01-30ddr: imx: Handle both 3733 and 3732 MTps ratesMarek Vasut
The DDR calibration tool for i.MX8M currently produces 3732 MTps rate in lpddr4_timing.c , while the PHY code expects 3733 MTps rate. Support both variants to avoid surprises where the system fails to boot. Signed-off-by: Marek Vasut <marex@denx.de>
2022-10-24imx8m: fix reading of DDR4 MR registers [again]Rasmus Villemoes
Commit 290ffe5788 (imx8m: fix reading of DDR4 MR registers) lifted a private definition of lpddr4_mr_read() from imx8mm-cl-iot-gate board code to drivers/ddr/imx/imx8m/ddrphy_utils.c, because that version actually seems to work in practice. However, commit 99c7cc58e1 (ddr: imx: Add i.MX9 DDR controller driver) reintroduced the broken version in drivers/ddr/imx/imx8m/ddr_init.c, copied most of the rest of ddrphy_utils.c to drivers/ddr/imx/phy/ddrphy_utils.c, and stopped building drivers/ddr/imx/imx8m/ddrphy_utils.c [and that file was then finally completely removed with 7e9bd84883 (imx8m: ddrphy_utils: Remove unused file)]. I assume this must have broken the imx8mm-cl-iot-gate board, at least those that have not had their eeprom programmed with the proper information. It certainly did break our out-of-tree board which always reads back the ID register and uses that for a sanity check. So apply the fix from 290ffe5788 once again. Fixes: 99c7cc58e1 (ddr: imx: Add i.MX9 DDR controller driver) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18imx8m: ddrphy_utils: Remove unused fileMarek Vasut
The ddrphy_utils.c is now deduplicated in drivers/ddr/imx/phy/ddrphy_utils.c , this drivers/ddr/imx/imx8m/ddrphy_utils.c is a remnant from when the deduplication was implemented and was not removed. Remove it as it is unused. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2022-07-26ddr: imx8m: helper: load ddr firmware according to binman symbolsPeng Fan
By reading binman symbols, we no need hard coded IMEM_LEN/DMEM_LEN after we update the binman dtsi to drop 0x8000/0x4000 length for the firmware. And that could save binary size for many KBs. Tested-by: Tim Harvey <tharvey@gateworks.com> #imx8m[m,n,p]-venice Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> [Alper: Check BINMAN_SYMS_OK instead] Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
2022-07-26ddr: imx9: enable Performance monitor counterYe Li
Add Kconfig for enabling reference events counter in DDRC performance monitor by default Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-07-26ddr: imx: Add i.MX9 DDR controller driverYe Li
Since i.MX9 uses same DDR PHY with i.MX8M, split the DDRPHY to a common directory under imx, then use dedicated ddr controller driver for each iMX9 and iMX8M. The DDRPHY registers are space compressed, so it needs conversion to access the DDRPHY address. Introduce a common PHY address remap function for both iMX8M and iMX9 for all PHY registers accessing. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-05-20imx8m: fix reading of DDR4 MR registersRasmus Villemoes
I was trying to employ lpddr4_mr_read() to something similar to what the imx8mm-cl-iot-gate board is doing for auto-detecting the RAM type. However, the version in drivers/ddr/imx/imx8m/ddrphy_utils.c differs from the private one used by that board in how it extracts the byte value, and I was only getting zeroes. Adding a bit of debug printf'ing gives me tmp = 0x00ffff00 tmp = 0x00070700 tmp = 0x00000000 tmp = 0x00101000 and indeed I was expecting a (combined) value of 0xff070010 (0xff being Manufacturer ID for Micron). I can't find any documentation that says how the values are supposed to be read, but clearly the iot-gate definition is the right one, both for its use case as well as my imx8mp-based board. So lift the private definition of lpddr4_mr_read() from the imx8mm-cl-iot-gate board code to ddrphy_utils.c, and add a declaration in the ddr.h header where e.g. get_trained_CDD() is already declared. This has only been compile-tested for the imx8mm-cl-iot-gate board (since I don't have the hardware), but since I've merely moved its definition of lpddr4_mr_read(), I'd be surprised if it changed anything for that board. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Tested-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-04-12imx8m: ddrphy_utils: Add 3732 MT/s modeMarek Vasut
Add entry for 3732 MT/s mode of operation of the LPDDR4, in which case the DDR PLL has to be configured in 933 MHz mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-02-05imx8ulp: ddr: Fix DDR frequency request issueYe Li
After acking the requested frequency, should wait the ack bit clear by DDR controller and check the DFS interrupt for next request polling. Otherwise, the next polling of request bit will get previous value that DDR controller have not cleared it, so a wrong request frequency is used. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2022-02-05imx8ulp:ddr: saving the dram config timing data into sramJacky Bai
On i.MX8ULP, The dram config timing need to be saved into sram for ddr retention when APD enter PD mode, so add this support on i.MX8ULP. Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-08-09ddr: Add DDR driver for iMX8ULPYe Li
Add iMX8ULP DDR initialization driver which loads the DDR timing parameters and executes the training procedure. When enabling IMX8ULP_DRAM_PHY_PLL_BYPASS, using PHY PLL bypass mode to do DDR init Signed-off-by: Ye Li <ye.li@nxp.com>
2021-04-08imx8mp: refine power on imx8mp boardhaidong.zheng
VDD SOC normal run changed to 0.85V LPDDR4 freq0 change from 4000MTS to 2400MTS Signed-off-by: haidong.zheng <haidong.zheng@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-01-23imx: ddr: imx8m: Move selfref_en after DDR scrubYe Li
When doing DDR scrub, the DDR may enter into self refresh if the selfref_en is enabled before DDR scrub. This will cause scrub can't complete that SBRSTAT.scrub_done won't be set. Since the selfref_en can be programmed during the course of normal operation, move it after DDR scrub Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-27imx8m: ddrphy_utils: Improve coding styleFabio Estevam
Currently checkpatch is not happy about this file: total: 14 errors, 2 warnings, 7 checks, 359 lines checked Improve the coding style so that it can now report: total: 0 errors, 0 warnings, 6 checks, 360 lines checked Reported-by: Tom Rini <trini@konsulko.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-07-14drivers: ddr: imx Workaround for i.MX8M DDRPHY rank to rank issueOliver Chen
Add logic to automatically update umctl2's setting based on phy training CDD value for rank to rank space issue Acked-by: Ye Li <ye.li@nxp.com> Signed-off-by: Oliver Chen <Oliver.Chen@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14drivers: ddr: imx8mp: Add inline ECC feature supportSherry Sun
the DRAM Controller in i.MX8MP will support a feature called "Inline ECC". This is supported for all 3 supported DRAM technologies (LPDDR4, DDR4 and DDR3L). When this feature is enabled by software, the DRAM Controller reserves 12.5% of DRAM capacity for ECC information, and presents only the non-ECC portion (lower 87.5% of the installed capacity of DRAM) to the rest of the SoC. The DRAM memory can be divided into 8 regions so that if a use case only requires ECC protection on a subset of memory, then only that subset of memory need support inline ECC. If this occurs, then there is no performance penalty accessing the non-ECC-protected memory (no need to access ECC for this portion of the memory map). This is all configured with the DRAM Controller. Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14driver: ddr: imx: correct the pwrctl setting of selfref_en on imx8mJacky Bai
The 'selfref_en' should be bit'0', so correct the setting to enable the auto self-refresh. Reviewed-by: Jian Li <jian.li@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-07-14driver: ddr: imx: skip ddr_ss_gpr config on imx8mnJacky Bai
There is no DDR_SS_GPR0 exits on i.MX8MN, so skip setting this register on i.MX8MN. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-01-08ddr: imx8m: Add DRAM PLL to generate 1000Mhz outputPeng Fan
We will generate DRAM 4000MT/s as default for i.MX8MP. So need DRAM PLL to generate 1000Mhz clock to DDR PHY and controller. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-07ddr: imx8m: Return error values from LPDDR4 trainingFrieder Schrempf
In cases when the same SPL should run on boards with i.MX8MM, that differ in DDR configuration, it is necessary to try different parameters and check if the training done by the firmware suceeds or not. Therefore we return the DDR training/initialization success to the upper layer in order to be able to retry with different settings if necessary. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
2019-12-27imx8m: ddr_init: Move ddr_init() messages to debug levelFabio Estevam
Currently inside ddr_init() there is a mix of printf() and debug() level messages. Since this type of information is useful for debug purposes, convert all of them to debug level for consistency. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2019-10-08ddr: imx8m: Fix the ddr init hang on imx8mqJacky Bai
On, i.MX8MQ, the PLL config must be done when ddrmix isolation is released. So move the dram pll init after iso config done. For other i.MX8M SOC, either init pll before or after isolation is ok. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08driver: ddr: Refine the ddr init driver on imx8mJacky Bai
Refine the ddr init driver to make it more reusable for different DDR type(LPDDR4, DDR4 & DDR3L). So we can reduce some redundant code. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08imx8mq: Update the ddrc QoS setting for B1 chipBai Ping
Update the ddrc Qos setting for B1 to align with B0's setting. Correct the initial clock for dram_pll. This setting will be overwrite before ddr phy training. Although there is no impact on the dram init, we still need to correct it to eliminate confusion. Signed-off-by: Bai Ping <ping.bai@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Tested-by: Robby Cai <robby.cai@nxp.com>
2019-10-08ddr: imx8m: Fix ddr4 driver build issueYe Li
Since the parameter of dram_pll_init is changed, update to use new. Also remove non-existed header file. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08ddr: imx8m: fix ddr firmware location when enable SPL OFPeng Fan
With CONFIG_SPL_OF_CONTROL, the device tree will be padded to end of the u-boot-spl-nodtb.bin, however we also put the ddr firmware file to this location, so need to adapt the code with SPL OF and align to 4 bytes to ease copy firmware. Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-07-13 10:31:05 +0000