summaryrefslogtreecommitdiff
path: root/drivers/net/phy/phy.c
AgeCommit message (Collapse)Author
4 daysnet: phy: Support overriding Auto Negotiation timeout with env variableSiddharth Vadapalli
The Auto Negotiation procedure between two Ethernet PHYs consists of determining the best commonly supported parameters among Speed, Duplex Mode and Flow Control. The time taken for this procedure is not only dependent on the local PHY used, but also on the link-partner PHY. While a timeout can be specified in the form of a "CONFIG" on the basis of the local PHY present on the device, since the timeout also depends on the link-partner PHY, it might be necessary to modify the timeout. To avoid rebuilding the bootloader for a given device, just because it may be connected to various link-partner PHYs, each with a different timeout, introduce an environment variable named "phy_aneg_timeout" and override "CONFIG_PHY_ANEG_TIMEOUT" with "phy_aneg_timeout". Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Acked-by: Jerome Forissier <jerome.forissier@linaro.org> [jf: add missing #include <env.h>] Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
2025-05-23net: phy: Do not do CL22 phy reset before ethernet phy driver probeSkyLake.Huang
Remove unnecessary CL22 phy reset before ethernet phy driver probe. Lots of ethernet phys requires driver to load firmware. Before that, CL22 phy reset may lead to malfunction. Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
2024-06-13net: phy: Replace PHY_ANEG_TIMEOUT with Kconfig symbolMarek Vasut
Switch PHY_ANEG_TIMEOUT to CONFIG_PHY_ANEG_TIMEOUT Kconfig symbol. This removes one more configuration headers option finalizes its Kconfig symbol conversion. No functional change expected. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2024-05-20Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"Tom Rini
As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07net: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2024-03-26net: phy: Factor out PHY GPIO reset codeMarek Vasut
Pull the PHY GPIO reset code into separate function, since this is and will be reused multiple times. Set up default reset assert and deassert timing to generous 20ms and 1ms for maximum compatibility in case those DT properties are missing. Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2024-03-26net: phy: the NC-SI phy device do not require mdio busJacky Chou
As with fixed-link phy device, the NC-SI phy devive does not require an mdio bus. So, a condition is added to check the NC-SI phy id to avoid accessing the bus pointer that is NULL. Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
2024-03-26net: phy: Fix signed shift overflowEugeniu Rosca
Booting R-Car Gen3 arm64 U-Boot with CONFIG_UBSAN=y resulted in: ===================================================================== UBSAN: Undefined behaviour in drivers/net/phy/phy.c:728:19 left shift of 1 by 31 places cannot be represented in type 'int' ===================================================================== Fix it by appending the UL suffix to the numeric literal. While at it, convert the type of "addr" variable from signed to unsigned, to protect against shifting the numeric literal by a negative value (which would lead to yet another undefined behavior). Fixes: 1adb406b0141 ("phy: add phy_find_by_mask/phy_connect_dev") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> * Using U-suffix for integer is sufficient. * ffs() of non-zero value cannot be 0. But addr being unsigned is * preferable. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-09-21net: phy: xilinx-gmii2rgmii: Removed hardcoded phy address 0 for bridgeTejas Bhumkar
Current code expects bridge phy address at 0 which is not correct expectation because bridge phy address is configurable. That's why update the code to read reg property to figure it out where bridge is and use it in phy creation code. Signed-off-by: Tejas Bhumkar <tejas.arvind.bhumkar@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/20230915045043.4167628-1-tejas.arvind.bhumkar@amd.com
2023-09-14net: phy: Remove unused NEEDS_MANUAL_RELOC code bitsMarek Vasut
The last user of the NEEDS_MANUAL_RELOC has been removed in commit 26af162ac8f8 ("arch: m68k: Implement relocation") Remove now unused NEEDS_MANUAL_RELOC code. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-06-10net: phy: Unpublish phy_connect_dev()Marek Vasut
The phy_connect_dev() is legacy API, now that there are no users, make it internal to phy.c and unpublish it from headers. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07net: phy: Add phy_modify_mmd() and phy_modify_mmd_changed() from LinuxMarek Vasut
Add phy_modify_mmd()/phy_modify_mmd_changed() from Linux 5.1.y as of commit b8554d4f7288f ("net: phy: add register modifying helpers returning 1 on change") This is used by the upcoming Marvell 10G PHY driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07net: phy: Synchronize PHY interface modes with LinuxMarek Vasut
Synchronize PHY interface modes with Linux next 6.2.y commit: 0194b64578e90 ("net: phy: improve phy_read_poll_timeout") Retain LX2160A/LX2162A PHY modes as those are not yet supported by the Linux kernel, but isolate those with ifdeffery. Isolate NCSI which are also not supported by Linux kernel. Note that the ifdeffery cannot be avoided with IS_ENABLED() here due to compilation of the entire conditional, which would fail in case NCSI symbols are not available. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
2023-04-07net: phy: Only call phy_init() on systems needing manual relocationMarek Vasut
The phy_init() is now used only to perform manual relocation of PHY driver callbacks. Wrap it in ifdeffery and only call it on systems which still require manual relocation, i.e. m68k . Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: Re-inline phy_drv_reloc()Marek Vasut
Wrap phy_drv_reloc() back into phy_init() to reduce ifdeffery, since phy_drv_reloc() is now called only from one call site. No functional change. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: Drop unused phy_register()Marek Vasut
This function is no longer used, drop it. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: Drop static phy_drivers listMarek Vasut
The static phy_drivers list is superseded by linker list of struct phy_drivers now that all drivers have been converted to the later. Drop the phy_drivers list as well as list_head from struct phy_driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: gen10g: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: genphy: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: xilinx-gmii2rgmii: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: ncsi: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: fixed: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: mscc: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: intel-xway: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: xilinx: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: vitesse: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: ti: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" This particular PHY driver is slightly more spread out across additional source files. Since the phy_register() calls are no longer necessary, all the registration calls across those source files is dropped. Furthermore, the Makefile can now be updated to only compile generic TI PHY support if matching Kconfig symbol is enabled and the ifdeffery in the generic TI PHY driver can be dropped. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: teranetics: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: smsc: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: realtek: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: nxp-tja11xx: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: nxp-c45-tja11xx: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: natsemi: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: meson-gxl: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: ksz90x1: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: ksz8xxx: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: marvell: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: lxt: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: et1011c: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: mv88e61xx: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: davicom: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: cortina: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: ca_phy: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: broadcom: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: b53: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: atheros: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: aquantia: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: adin: Convert to U_BOOT_PHY_DRIVER()Marek Vasut
Convert PHY driver to U_BOOT_PHY_DRIVER() macro and drop phy_register() init call. Converted using sed "s@^static struct phy_driver \(.*\)_driver = \+{@U_BOOT_PHY_DRIVER(\L\1) = {" Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
2023-04-07net: phy: Iterate over both registered PHYs and struct phy_driver linker listMarek Vasut
Introduce U_BOOT_PHY_DRIVER() macro which is used to add struct phy_driver into a new linker list section containing all compiled in struct phy_driver drivers. This is so far empty until PHY drivers are converted over to this macro. Iterate over both drivers registered using soon to be legacy phy_register() as well as drivers in the new linker list when looking up a suitable PHY driver. This way, PHY drivers can be converted over to the new macro one driver at a time. The relocation of callbacks for linker list based drivers now happens in phy_init() call as the drivers are available at that point in time, and phy_register() is not called for those drivers. Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Acked-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-05 04:15:38 +0000