summaryrefslogtreecommitdiff
path: root/drivers/phy/marvell/comphy_cp110.c
AgeCommit message (Collapse)Author
2024-05-20Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"Tom Rini
As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-19Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
2024-05-07phy: Remove <common.h> and add needed includesTom Rini
Remove <common.h> from this driver directory and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
2023-09-24common: Drop linux/printk.h from common headerSimon Glass
This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
2023-06-12global: Use proper project name U-BootMichal Simek
Use proper project name in comments, Kconfig, readmes. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
2021-12-19phy: marvell: a3700: Convert to official DT bindings in COMPHY driverPali Rohár
Convert A3720 common PHY driver to official DT bindings. This puts us closer to be able to synchronize A3720 device-trees with those from Linux. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Konstantin Porotchkin <kostap@marvell.com> Cc: Robert Marko <robert.marko@sartura.hr> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Marcin Wojtas <mw@semihalf.com> Cc: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Stefan Roese <sr@denx.de>
2021-09-27phy: marvell: cp110: Support SATA invert polarityDenis Odintsov
In commit b24bb99d cp110 configuration initially done in u-boot was removed and delegated to atf firmware as smc call. That commit didn't account for later introduced in d13b740c SATA invert polarity support. This patch adds support of passing SATA invert polarity flags to atf firmware during the smc call. Signed-off-by: Denis Odintsov <shiva@mail.ru> Cc: Baruch Siach <baruch@tkos.co.il> Cc: Rabeeh Khoury <rabeeh@solid-run.com> Cc: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2021-04-29phy: marvell: utmi: update utmi config which fixes usb2.0 instabilityGrzegorz Jaszczyk
- Add additional step which enables the Impedance and PLL calibration. - Enable old squelch detector instead of the new analog squelch detector circuit and update host disconnect threshold value. - Update LS TX driver strength coarse and fine adjustment values. Change-Id: Ifa0a585bfb5ecab0bfa033eed6874ff98b16a7df Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: add support for SFI1Igal Liberman
In CP115, comphy4 can be configured into SFI port1 (in addition to SFI0). This patch adds the option described above. In addition, rename all existing SFI/XFI references: COMPHY_TYPE_SFI --> COMPHY_TYPE_SFI0 No functional change for exsiting configuration. Change-Id: If9176222e0080424ba67347fe4d320215b1ba0c0 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: fix pll initialization for second utmi portGrzegorz Jaszczyk
According to Design Reference Specification the PHY PLL and Calibration register from PHY0 are shared for multi-port PHY. PLL control registers inside other PHY channels are not used. This commit reworks utmi device tree nodes in a way that common PHY PLL registers are moved to main utmi node. Accordingly both child nodes utmi-unit range is reduced and register offsets in utmi_phy.h are updated to this change. This fixes issues in scenarios when only utmi port1 was in use, which resulted with lack of correct pll initialization. Change-Id: Icc520dfa719f43a09493ab31f671efbe88872097 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: cp110: mark u-boot power-off callsIgal Liberman
It helps ATF to determine who called power off function (U-boot/Linux) and act accordingly Change-Id: Icfc5cbfdba64754496812154272b28c0ff639f0f Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: fix handling of unconnected comphyChristine Gharzuzi
- the default value of comphy pipe selector is set to PCIe (x4) in case of unconnected comphy the default value remains 0x4 which may lead to several issues with comphy initialization. - this patch adds SMC call that powers off the comphy lane in case of unconnected comphy. Change-Id: I196b2916518dd8df3b159ffa85e2989b8e483087 Signed-off-by: Christine Gharzuzi <chrisg@marvell.com> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: pass sgmii id to firmwareIgal Liberman
Currently, we don't pass id for SGMII 0/1. A bug in comphy selector configuration was found (in comphy firmware), after fixing it, SGMII0/1 have different configuration, so we need to pass the ID the firmware. Change-Id: Idcff4029cc9cf018278e493221b64b33574e0d38 Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: cp110: clean up driver after it was moved to atfGrzegorz Jaszczyk
Change-Id: I358792a96c13b54e700c05227cc7a8f6bd584694 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: remove both phy and pipe selector configurationGrzegorz Jaszczyk
Now the comphy configuration is handled in atf, therefore there is no need to configure phy or pipe selector in u-boot, it is configured by atf for each particular pair: lane and mode. Change-Id: I0bebf8d5ff66dbeb6bf9ef90876195938a8eb705 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: let the firmware perform training for XFIGrzegorz Jaszczyk
Replace the XFI training with appropriate SMC call, so the firmware will perform exact initialization. Update Stefan 2021-03-23: Move comphy_smc() function to an earlier place - necessary for the mainline merge. Change-Id: I789b130b05529dc80dadcf66aef407d93595b762 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: let the firmware configure comphy for USBGrzegorz Jaszczyk
Replace the comphy initialization for USB with appropriate SMC call, so the firmware will execute required serdes configuration. Change-Id: I7f773c0dfac70db9dd2653de2cdcfac577e78c4e Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
2021-04-29phy: marvell: cp110: let the firmware configure comphy for RXAUIGrzegorz Jaszczyk
Replace the comphy initialization for RXAUI with appropriate SMC call, so the firmware will execute required serdes configuration. Change-Id: Iedae0285fb283e05bb263a8b4ce46e8e7451a309 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: remove unused definitionsMarcin Wojtas
Even if comphy types of SATA2/SATA3/SGMII3 and comphy speeds of 1.5G/3G/6.25G were referenced in the driver non configuration (dts) was using it. This patch removes unused definitions. Change-Id: I53ed6f9d3a82b9d18cb4e488bc14d3cf687f9488 Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-04-29phy: marvell: add RX training commandIgal Liberman
This patch adds support for running RX training using new command called "rx_training" Usage: rx_training - rx_training <cp id> <comphy id> RX training allows to improve link quality (for SFI mode) by running training sequence between us and the link partner, this allows to reach better link quality then using static configuration. Change-Id: I818fe67ccaf19a87af50d4c34a9db7d6802049a5 Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
2021-04-29phy: marvell: cp110: utmi: update analog parameters according to latest ETPIgal Liberman
Add UTMI analog parameters initialization values according to latest ETP. Change-Id: I5bcca205a3995202a18ff126f371a81f69e205c8 Signed-off-by: Igal Liberman <igall@marvell.com>
2021-04-29phy: marvell: cp110: initialize only enabled UTMI unitsOmri Itach
UTMI should be initialized only for enabled device tree nodes. This fix overrides current internal configuration array entry with the next DT entry data if error is detected during the current DT entry parsing or the current port is disabled. This way the internal configuration structure will only contain valid ports information obtained from the DT. Change-Id: I9c43c6a5d234e15ae9005d1c9bc983fc1f3544b8 Signed-off-by: Omri Itach <omrii@marvell.com> Signed-off-by: Ken Ma <make@marvell.com>
2021-04-29phy: marvell: rename comphy related definitions to COMPHY_XXIgal Liberman
Currently, all comphy definitions are PHY_TYPE_XX and PHY_SPEEED_XX. Those definition might be confused with MDIO PHY definitions. This patch does the following changes: - PHY_TYPE_XX --> COMPHY_TYPE_XX - PHY_SPEED_XX --> COMPHY_SPEED_XX This improves readability, no functional change. Change-Id: I2bd1d9289ebbc5c16fa80f9870f797ea1bcaf5fa Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
2021-02-02common: Drop asm/global_data.h from common headerSimon Glass
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-29phy: marvell: cp110: update mode parameter for pcie power on callsIgal Liberman
It helps ATF to determine who called power on function (U-boot/Linux). The corresponding ATF code was added in this commit: mvebu: cp110: avoid pcie power on/off sequence when called from Linux https://github.com/ARM-software/arm-trusted-firmware/commit/55df84f974ea37abbb4f93f000f101f70cda5303 Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29phy: marvell: cp110: let the firmware configure comphy for PCIeGrzegorz Jaszczyk
Replace the comphy initialization for PCIe with appropriate SMC call, so the firmware will perform appropriate comphy initialization. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-10-29phy: marvell: cp110: let the firmware configure the comphyGrzegorz Jaszczyk
Replace all comphy initialization with appropriate smc calls. It will result with triggering synchronous exception that is handled by Secure Monitor code in EL3. Then the Secure Monitor code will dispatch each smc call (by parsing the smc function identifier) and triggers appropriate comphy initialization. This patch reworks serdes handling for: SATA, SGMII, HS-SGMII and SFI interfaces. Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> Reviewed-by: Igal Liberman <igall@marvell.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-19phy: marvell: add SATA comphy RX/TX polarity invert supportRabeeh Khoury
This patch adds support to Armada 7k/8k comphy RX/TX lane swap. The 'phy-invert' DT property defines the inverted signals. Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19phy: marvell: Support changing SERDES map in board fileMarek Behún
This adds a weak definition of comphy_update_map to comphy_core, which does nothing. If this function is defined elsewhere, for example in board file, the board file can change some parameters of SERDES configuration. This is needed on Turris Mox, where the SERDES speed on lane 1 has to be set differently when SFP module is connected and when Topaz Switch module is connected. This is a temporary solution. When the comphy driver for armada-3720 will be added to the kernel, the comphy driver in u-boot shall also be updated and this should be done differently then. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-04treewide: replace with error() with pr_err()Masahiro Yamada
U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-09fix: phy: marvell: cp110: pcie: update analog parameters according to latest ETPIgal Liberman
Add PCIE analog parameters initialization values according to latest ETP. Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09fix: phy: marvell: cp110: rename comphy_index to cp_indexIgal Liberman
No functional change. The variable name "comphy_index" is misleading, it represents cp index and not comphy index. Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09fix: phy: marvell: cp110: sfi: update analog parameters according to latest ETPIgal Liberman
Add SFI analog parameters initialization values according to latest ETP. Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09fix: phy: marvell: cp110: fix comphy lane 4 selection optionsStefan Roese
The comphy configuration is incorrect. Set the correct values for SGMII. In addition, remove xaui from the comment as it is not supported. Signed-off-by: Yoav Gvili <ygvili@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09phy: marvell: cp110: add 5G XFI modeIgal Liberman
This patch adds the option to configure a comphy to 5G XFI mode. In order to configure the comphy to 5G XFI, update the comphy node in the device-tree: phy2 { phy-type = <PHY_TYPE_SFI>; phy-speed = <PHY_SPEED_5_15625G>; }; Signed-off-by: Igal Liberman <igall@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09fix: phy: marvell: cp110: update comphy selector optionStefan Roese
Align PHY selectors register with Armada-CP-110 functional SPEC update all relevant device trees with this change. Signed-off-by: Hanna Hawa <hannah@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09fix: phy: marvell: cp110: sata: update analog parameters according to latest ETPIgal Liberman
Add SATA analog parameters initialization values according to latest ETP. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09fix: phy: marvell: cp110: fix the KR/SFI line 4 selectorStefan Roese
This patch fixes the following: 1. KR/SFI on lane #4 mux selector is 0x2 and not 0x1 2. Comment typo Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09phy: marvell: add IGNORE COMPHY typeStefan Roese
This type tells u-boot to preserve the COMPHY settings as is it is usefull in situations where the COMPHY was initialized by earlier firmware. Note that IGNORE is different from UNCONNECTED since setting UNCONNECTED type will disconnect the COMPHY in the COMPHY MUX which is a desired behaviour Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09phy: marvell: cp110: update utmi phy connection typeStefan Roese
UTMI_PHY_TO_USB_HOST was used in USB3 UTMI dts node only, but there will be USB2 UTMI dts node for some SoCs that have got USB2 controller, so rename TO_USB_HOST to TO_USB3_HOST to distinguish TO_USB2_HOST in later on patches. Signed-off-by: zachary <zhangzg@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09phy: marvell: cp110: add support for end point configurationStefan Roese
The serdes was always configured in root complex mode. this patch add new entry in device tree (per serdes) which indicates whether the serdes is in end point mode. if so, it skips the root complex configuration. Signed-off-by: Haim Boot <hayim@marvell.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-05-09phy: marvell: Replace PHY_TYPE_KR with PHY_TYPE_SFIStefan Roese
Use correct naming as done in the latest Marvell U-Boot version as well. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Igal Liberman <igall@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
2016-09-27drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 7K/8KStefan Roese
This version is based on the Marvell U-Boot version with this patch applied as latest patch: Git ID 7f408573: "fix: comphy: cp110: add comphy initialization for usb device mode" from 2016-07-05. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-13 01:46:14 +0000